5x Pushbutton B3F Green Key Omron Electronica for Arduino Prototype Switch 12 5x Pushbutton B3F Green Key Omron Electronica Arduino Prototype Switch 12 features:- 5x Pushbuttons B3F Omron- 5x Keys- Maximum current: 50mA- Tension DC: 24V- Operating force: 1.27N- Switch terminals - Weldable- Contact: SPST-NO- Contact resistance: 100M Ohm- Type of action: Superficial- Measures: 12x12x7.3mm Code K0075 Available Price €0.20
Resistor 2K Ohm 5% 0,25W 1/4W Resistors 2K Ohm 5% 0,25W 1/4W features:-2 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0014 Available Price €0.08
SIM800L GPRS GSM SIM Board Quadband SIM800L GPRS GSM SIM Board Quadband features: Package includes: - SIM800L module, - 2x pin headers, - Spring antenna, - 3G PCB antenna - 15cm cable. - Supported SIM format: Micro SIM. Code W0017 Available Price €6.49
Rechargeable battery XTAR 18650 2200mAh Li-ion Rechargeable battery XTAR 18650 2200mAh Li-ion features: - With PCB protection circuit that protects the battery against overcharges and over discharges, increasing battery life - Quantity: 1 unit - Authentic Protection Battery Code PP019 Available Price €8.99
SW-520D Vibration Metal Tilt Sensor Detects changes in the sensor angle and returns to the digital value. 5x SW-520D Vibration Metal Tilt Sensor features: - Contact resistance: Code S0020 Available Price €0.45
Sensor Module Infrared Obstacle Detector Car Robot Ideal for projects with ARDUINO, Smart Car. Sensor Module Infrared Obstacle Detector Car Robot features: - Power supply: 3.3 - 5V DC - OUT level 0/1 output - Sensitivity adjustment - Power LED - Distance from detection: 2 - 30cm (max60cm) - detection angle: 35º - LED output status indicator - Dimensions: 40x13x8mm Code S0011 Available Price €1.49
Waterproof Electronic ABS Plastic Junction Prototype Box 115x90x55 mm Waterproof Electronic ABS Plastic Junction Prototype Box 115x90x55 features: - Excellent waterproof performance and moisture proof- Dimension 115x90x55 mm Code H0119 Available Price €3.89
Battery holder 1x 18650 3.7V Power cable Characteristic: - Cable 15cm long - Measurements 74x21x 19mm - Weight: 8 gr. (approx.) - Stack length max 67mm Code PP014 Available Price €0.99
Magnet Cylindrical Disc Neodymium Ferrite 2x4mm Magnet Cylindrical Disc Neodymium Ferrite 2x4mm features: - External magnet dimensions: 2x4mm- Magnet shape: cylindrical- Magnet material: neodymium Code D0094 Available Price €0.26
Terminal for JST PHR Female Connector 2mm Terminal for JST PHR Female Connector 2mm features: Manufacturer JST Connector series: PH Connector: contact Type of connector: female Type of connector: conduit-plate Mechanical assembly: crimped Working voltage: 100V Working current: 2A Material: phosphor bronze Cable size: 30AWG..24AWG Compatible with: JST PHR-2 Female 2 PIN 2mm Connector JST PHR-2 Female 3 PIN 2mm Connector PH series data sheet Code K0216 Available Price €0.10
Servo with Rotation 180 Servo Motor Type S3003 Servo with Rotation 180 Servo Motor Type S3003 features: - Model Aircraft Futaba Arduino Robotics - Operating Voltage: 4.8V to 6V - Max Torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V) - Max radius: 180º - Temperature range: -20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese manufacturing Code R0018 Available Regular price €6.29 -€0.30 Price €5.99
Sensor Shield V5 APC220 Arduino compatible Arduino Sensor Shield V5 APC220 features: Sensor Shield V5.0 allows: - Being punctured directly to an Arduino Uno, Mega, Leonardo plate- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more Code M0001 Available Price €2.89
10x Electrolytic Capacitor 470uF 16V 105ºC 10x Electrolytic Capacitor 470uF 16V 105ºC PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 470uF-Maximum tension: 16V-Maximum temperature 105º C-Dimensions: 8x12mm-Quantity: 10 units Code D0047 Available Price €0.13
Resistor 6,8K Ohm 5% 0,25W 1/4W Resistors 6,8K Ohm 5% 0,25W 1/4W features:- 6.8 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0020 Available Price €0.08
Microcontroller ATMEGA328P-PU DIP-28 Microcontroller ATMEGA328P-PU DIP-28 features:- Series: AVR® ATmega- Core Processor: AVR- Package / Case: 28-DIP (0.300 ", 7.62mm)- Core Size: 8-Bit- Speed: 20MHz- Connectivity: I²C, SPI, UART / USART- Peripherals Brown-out: Detect / Reset, POR, PWM, WDT- Number of I/O: 23- Program Memory Size: 32KB (16K x 16)- Program Memory Type: FLASH- EEPROM Size: 1K x 8- RAM Size: 2K x 8- Voltage - Supply (Vcc / Vdd): 1.8 V ~ 5.5 V- Data Converters: A / D 6x10b- Oscillator Type: Internal- Operating Temperature: -40 ° C ~ 85 ° CFManufacturer: SGS-THOMSON / ST- RoHS: Yes- Quantity: 1 unit Code T0008 Available Price €5.95
Resistor 10M Ohm 5% 0,25W 1/4W Resistor 10M Ohm 5% 0,25W 1/4W features:-10M Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0034 Available Price €0.08
Protoboard Breadboard 9x15cm Protoboard Breadboard 9x15cm features: -PCB dimension: 9x15cm-Hole diameter: 1mm -Pitch: 2.54mm-Bakelite with copper fields Code PB016 Available Price €0.75
NE555P DIP8 Precision Timer Integrated Circuit NE555P DIP8 Precision Timer Integrated Circuit features: - Blister: DIP8- Number of pins: 8- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Input voltage VCC: 4.5 - 16 VDC- THRES voltage level: 2.4 - 11.2 VDC- TRIG voltage level: 1.1 - 5.6 VDC- RESET voltage level: 0.3 - 1 VDC- DISCH voltage level change out of state: 0.15 - 0.4 nA- CONT voltage (open circuit): 2.6 - 11 VDC- Low level output voltage: 0.1 - 0.4 V- High level output voltage: 2.75 - 13.3 V - Output current I (O): ± 200 mA- THRES current: 30 - 250 nA- TRIG current: 0.5 - 2 μA- RESET current: -0.4 - 0.4 μA- Current change DISCH out of state: 20 - 100 nA Code T0061 Available Price €0.79
Arduino Uno R3 Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog Code BAR66 Available Price €23.99
Capsule Electret Condenser Microphones 9.5mm MIC Capsule Electret Condenser Microphones 9.5 MIC features: - Measures: 9.7 x 6.7mm- Impedance: 1.5kΩ- Working current: 0.5mA- Working voltage: 4.5V (1.5-10V)- Bandwidth: 50 ... 16000Hz- Signal to noise ratio: ‰¥58dB- Sensitivity: -42 ± 3dB- Sensitivity tolerance: ± 3dB- Distance between terminals: 2.54mm Code M0020 Available Price €0.79
MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features: - Operating voltage: 4.8 V to 7.2 V- Consumption: 100mA- Torque max.: 12kg / cm (6V)- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)- Max. Radio: 180ºC- Temperature range: 0-55 degrees- Weight: 55 g- Cable length: 29cm- Dimensions: 54 x38x 20 mm- Servo connector: JR (JR and Futaba adaptable) Code R0016 Available Regular price €8.95 -€1.00 Price €7.95
Cable 1x0.35 Flexible single-pole 0.35mm black 1m Cable 1x0.35 Flexible single-pole 0.35mm² black features: -Conductor: Flexible Copper -Insulation: PVC -Low voltage electrical cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.35mm² -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer Diameter: 2.4mm Code K0031 Backorder Price €0.45
Switch Button 8x8mm on-off Switch Button 8x8mm on-off features:- Switch terminals: Weldable- Measures: 8x8x13mm Code K0078 Available Price €0.22
10x Multicolor LED 5mm 7 colors fast blink 5mm multicolor LED with automatic color change. 7 different colors are emitted and the blinking is fast. Code P0136 Available Price €0.15
3A DC Converter 4-53V Adjustable LM2596H Step Down Source Wide range of voltages, improved version. Drop module. They will use a multimeter to Check the output voltage and adjust the potentiometer. 3A DC Converter 4-53V Adjustable LM2596H Step Down Source features: - Based on the LM2596HVS-ADJ regulator - Rectification: Asynchronous - Output Voltage: 3v ~ 40v DC (adjustable) - Input Voltage: 4.5v - 53v DC - Max Output Current: 3A (with heat sink) - Ripple in output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2,5% - Operating temperature: -40ºC to + 85ºC - Measurements: 43x 21x 14 mm Code A0018 Available Price €2.79
Resistor 220K Ohm 5% 0,25W 1/4W Resistor 220K Ohm 5% 0,25W 1/4W features:-220 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0027 Available Price €0.08
Raspberry Pi 4 Modelo B 2GB RAM The Raspberry Pi 4 Model B is the latest product in the Raspberry Pi family of computers. This product is in the 2GB RAM version, with 4GB (B0069) and 1GB (B0067) versions also on offer. Code B0068 ✗ Out-of-Stock Price €89.99
Terminal for Female Conector JST PHR 2mm Manufacturer JST Connector Series : PH Connector : contact Connector Class : female Connector Type : conduit Code K0215 Backorder Price €0.10
Micro:bit BBC v2 - WiFi Single Board Micro-Computer, BLE 5.0, OBSOLETE This version has been withdrawn from sale. Select model BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer (solectroshop.com) The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. Code B0111
Rocker Switch KCD11 250V/3A On/Off SPST Rocker Switch 3A 250V On/Off SPST features: - AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch- Rocker switch; Type: On/Off (SPST)- Control on and off SPST and 2 terminals- Voltage and Current: AC250V, 3A- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)- Black Code K0092 Available Price €0.95
Female DC Power Connector Jack 2.1x5.5mm Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features: - Ideal for connecting without welding- It has two screws in the tip for positive and negative cable screwdriver Code K0050 Available Price €0.49
Resistor 47R Ohm 5% 0,25W 1/4W Resistor 47R Ohm 5% 0,25W 1/4W features:- 47R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0004 Available Price €0.08
Extension Board Shield Nano V3.0 ATmega328P Extension Board Shield for Arduino Nano V3.0. Code B0025 Available Price €2.95
DS18B20 Probe 2m Submersible Temperature Sensor Encapsulated with water resistant stainless steel with sensor dimensions 5.5*50mm, cable length 200 cm. DS18B20 Probe 2m Submersible Temperature Sensor features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 °C to 125 °C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Vcc red - Yellow digital output- Inocidable steel- Cable length: 2m Code S0015 Available Price €3.79
NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module Development Board NodeMcu module based on ESP8266 controller and programming in Lua language. NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC. ESP8266-12E is an improved version of ESP8266-12. It works as a standard WiFi 802.11 b / g / n 2.4 GHz. USB communication - the CH340 chip. Characteristics of ESP 12E: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - TCP Stack / Integrated IP - PLLs, Regulators and Integrated Power Management Units - Output Power: 0.15 (W); + 19.5dBm in 802.11b mode Code W0013 Available Price €4.49
Connector Jack 2.1x5.5mm Power Supply DC Male Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Connector Jack 2.1x5.5mm Power Supply DC Male features: - Ideal for connecting without welding- It has two screws in the tip for positive and negative cable screwdriver Code K0023 Available Price €0.80
Magnet Round Disc Neodymium Ferrite 10x4mm Magnet Round Disc Neodymium Ferrite 10x4mm features: - External magnet dimensions: 10x4mm- Magnet shape: round- Magnet material: neodymium Code D0093 Available Price €0.49
TCRT5000 IR Infrared Sensor Module The optical module (reflective) sensor with CMOS Schmitt inverter 74HC14D, which detects obstacles with high precision. The ideal obstacle detection detector for the installation of smart robots. TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of an object using infrared reflection on the object. The working wavelength is 950nm. The transmitter is infrared LED and the phototransistor receiver. The sensor allows the detection of an object at a distance of up to 15 mm. TCRT5000 IR Infrared Sensor Module features: - The module has an output: digital - CMOS Schmitt inverter 74HC14D - Power supply: 5V - Range: 0.2 mm - 15 mm Code S0048 Available Price €1.49
Resistor 47K Ohm 5% 0,25W 1/4W Resistors 47K Ohm 5% 0,25W 1/4W features:-47K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0023 Available Price €0.08
Free metal wheel 360° with plastic support for robotics Free metal wheel with white plastic support.It allows a 360 ° rotation, wheel silently and without problems. Free metal wheel 360° with plastic support for robotics features: - Main material: Polypropylene (PP), Steel.- Main color: White, silver tone. - Dimensions of support: 50x24mm. - Ball diameter: 15.80mm. Code H0149 Available Price €1.39
IR Remote Control + IR Infrared Receiver VS1838 IR Remote Control + IR Infrared Receiver VS1838 features: - The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal - Vcc supply: 3.3V-5V - IN digital output to connect to the port Arduino I / O - Remote measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module - Light a 3mm red LED by Infrared Code W0021 Available Price €2.49
Nano plate V3.0 CH340 + Arduino compatible pins It has an ATMega328P chip running at 16Mhz with a factory loaded bootloader Characteristic: - Microcontroller: ATmega328 - Operating Voltage (logic level): 5V - Input Voltage (recommended): 7-12V - Digital I / O Pins: 14 (6 PWM outputs) - Analog Inputs: 8 (A0-A7) - DC Current per Pin I / O 40 mA - Flash Memory: 32 KB (2 KB used by the bootloader) - SRAM: 2 KB - EEPROM: 1 KB - Clock Frequency: 16 MHz - USB Communication - CH340 - Dimensions: 18 mm x 44 mm Code B0026 Available Price €9.99
Breadboard Power Supply Protoboard 830/400 Points MB102 Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. Breadboard Power Supply Protoboard 830/400 Points MB102 features:- Input voltage supports up to 12V- Selectable 3.3V or 5V- USB input or standard DC 2.1 x5.5mm connector- Maximum current 700mA- It fits perfectly on the MB-102 breadboard feeding the two lateral buses- Weight: 15 gr. (approx.) Compatible only with MB-102 type plates Code A0003 Available Price €1.95
DS18B20 Temperature Sensor 0.5ºC TO-92 Also available with waterproof casing and 100cm cable and 200cm. DS18B20 Temperature Sensor TO-92 0.5ºC Precision 5V Integrated features:- Device function: Temperature sensor- Type of output: Digital- Supply voltage: 3V to 5.5V- Accuracy: ± 0.5ºC- Temperature threshold: Programmable- Operating temperature: -55ºC to + 125ºC- Encapsulated: TO-92- Supply current: 1.5mA Code S0014 Available Price €1.95
Potentiometer B1K Linear Potentiometer B1K Linear features: -1k OHM kΩ - linear potentiometer 1k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0065 Available Price €0.99
Male Double Row 80 Pin Header 2x40 Male Double Row 80 Pin Header 2x40 features:- Type: Male- Insertion position: Vertical- Separation between pins: 2.54mm- Quantity: 1 unit 2x40 pins Code K0150 Available Price €0.99
4x4 High Quality Keyboard Matrix Push Buttons 16 Touch Keys High quality keyboard, with 16-key matrix.Ideal for your arduino projects, but can also be used with other microcontrollers. 4x4 High Quality Keyboard Matrix Push Buttons 16 Touch Keys features: - Momentary contact- Number of push buttons: 16- Dimensions: 39mm x 43mm Code M0009 Available Price €1.49
Resistor 510 ohm 5% 0,25W 1/4W carbon film resistor Resistencias (510 Ohm) de tolerancia de 0.05 y potencia de 0,25W. En el carbon film. Code D0011 Available Price €0.08
ESP-12F ESP8266 12F WiFi Board Module - WIFI module based on the ESP8266 controller- ESP8266-12F is an improved version of ESP8266-12E- It works as a standard WiFi 802.11 b / g / n 2.4 GHz. It is equipped with 22 outputs (pitch 2 mm) of which 11 are GPIO, ADC 1 and SPI. A LED and a PCB antenna have been incorporated ESP-12F ESP8266 12F WiFi Board Module features: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)- Supported protocols: 802.11 b / g / n- Network support: 2.4 GHz- Band: 2400 (MHz)- Wi-Fi Direct (P2p), Soft Access Point- Integrated TCP / IP Stack.- PLL, regulators and integrated energy management units- Output power: 0.15 (W); + 19.5dBm in 802.11b mode- Consumption in low energy mode: <10 uA- Integrated 32-bit processor Code W0064 Available Price €3.09
DHT22/AM2302 Temperature Sensor Humidity PCB + Digital Cable for Arduino - The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement - This sensor, unlike DHT11, is capable of measuring negative temperature values and measures tenths of a degree Characteristic: - Operating voltage: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy - Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy - Maximum sampling rate: 2 seconds Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: Write texts on the OLED 0.96 '' screen - Read the measurements of the temperature / humidity sensor DHT22 / AM2302 on a 0.96 '' OLED screen Send /> Code M0099 Available Regular price €6.49 -€2.00 Price €4.49
15x Electrolytic Capacitor 10uF 50V 105º C PIC for Arduino 15x Electrolytic Capacitor 10uF 50V 105º C PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 10uF-Maximum tension: 50V-Maximum temperature: 105º C-Dimensions: 5x11mm-Quantity: 15 units Code D0040 Available Price €0.09
4-Channel 5V 10A Relay Module Characteristic: - Channels: 4 (independent protected by Optocouplers) - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - Isolation: Yes - Indicator LED: For each channel - Dimensions: 54x 72mm - 5V Optocoupled 4-Channel Relay Module - This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: User manual for the remote control + 4-channel 315 MHz IC2262 receiver: - Relay Module Programming 5V 10A 4 Channel with remote control + 4 channel receiver Code RL007 Available Price €3.99
XL6009 DC-DC Step-Up Booster Controller LM2577 - The XL6009 module has a superior performance than the LM2577 module - The regulator-booster of High performance Characteristic: - Based on the XL6009E1 regulator - Input voltage: 3V-32V, - Output voltage: 5-35V (adjustable), - Output current: 2A maximum 3A (heat sink is required) - Conversion efficiency: up to 94% - Rectifier: not synchronous rectification - Short circuit protection: current limitation, since recovery - Operating temperature: industrial grade (-40 ° C - 85 ° C) - Load regulation: ± 0.5% - Voltage regulation: ± 0.5% - Size: 50 x 22 x 15 mm Code A0005 Available Price €2.45
Lot of 100unds White Nylon Clamps Lot of 100unds White Nylon Clamps features: - Plastic flange, polyamide 100x2.5mm plastic flanges - quantity: 100units Code K0259 Available Price €1.79
Attiny85 Digispark USB Development Board Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter. Similar to the Arduino line , It is one of the smallest boards on the market. Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others. You can use many of the same Arduino libraries and have your own on the digispark wiki. Attiny85 Digispark USB Development Board features: -USB power supply -External power supply (7v-35v DC 12v maximum recommended) -5V DC 500mA regulator on board -Programmable with the Arduino IDE -Loaded with Micronucleus bootloader Code B0001 Last items in stock Price €4.95
2x CNY70 Reflective Optical Sensor with Transistor Output 2x CNY70 Reflective Optical Sensor with Transistor Output features: - Reflective optical sensor with transistor output- Reflective optical coupler used to distinguish edge or line detection- Dimensions of the housing are 7 x 7 x 6 mm- Supply voltage: 5V- Maximum diode current: 50 mA- Maximum collector-emitter voltage: 32V- Maximum collector current of 50 mA- Quantity: 2 units Code S0121 Available Price €0.74
15x Electrolytic Capacitor 10uF 25V 105ºC PIC for Arduino 15x Electrolytic Capacitor 10uF 25V 105ºC PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 10uF-Maximum tension: 25V-Maximum temperature: 105º C-Dimensions: 5x11mm-Quantity: 15 units Code D0039 Available Price €0.09
Embellisher Button Red White Yellow Orange Potentiometer Knob for Arduino Embellisher features:- Color black and red, white, yellow, orange- Upper diameter: 0.9 cm- Lower diameter: 1.5 cm- Height: 1.6 cm- Inside hole diameter: 0.6 cm Code K0061 Available Price €0.69
RJ45 8p8c Cat5e Ethernet network connector for crimping Quantity: 1 unit Type 8p8c Code K0221 Available Price €0.13
25x M3x4 Nylon Screw 25x M3x4 Nylon Screw features: -Polyamide 4mm Thread Arduino Robot PCB Screw -M3 Screw -Thread: 4mm -Round head -Star (Philips) DIN7985 -Quantity: 25 units -Color: white Code H0061 Available Price €0.19
9pins male D-Sub cable to female IDC10 9-pin male d-sub to female IDC 10 cable. Code K0253 ✗ Out-of-Stock Price €2.69
Resistor 5,1K Ohm 5% 0,25W 1/4W Resistor 5,1K Ohm 5% 0,25W 1/4W features:-5.1K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0018 Available Price €0.08
10x Linear Potentiometer 100k OHM kΩ 10x Linear Potentiometer 100k OHM kΩ features:- 100k Ohm kΩ Linear- Horizontal variable resistance PCB- Quantity: 10 units Code K0063 Available Price €0.12
Push button 6x6x4mm Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x4.3mm -Quantity: 1 unit Code K0201 Available Price €0.21
Water Level Sensor Module One Mega Pic Easily convert water level to analog signal The analog output signal can be read directly on the Arduino board Characteristic: - Operating voltage: 3.3V -5 V - Consumption: less than 20 mA - Sensor type: Analog - Operating temperature: 10º C -30º C - Detection area: 40 mm x 16 mm - Dimensions: 60 mm x 20 mm Code S0023 Available Price €1.39
L293D Motor Drive Shield Expansion Board It allows controlling many different types of engines: - Up to 4 bidirectional current motors- Up to 2 stepper motors (unipolar or bipolar) In addition it is provided with two connectors for servos. L293D Motor Drive Shield Expansion Board features: - Minimum operating voltage: 4.5 V- Maximum operating voltage: 36 V- Maximum current: ± 1.2 A (650mA)- Logic voltage: 5V- Controller L293D- Measures: 70x55x20 mm L293D controller consists of 4 H bridges with 650 mA current with thermal protection.Pull-down resistors keep the motors off during startup. Code R0001 Available Price €2.95
10x Linear 5K Potentiometer OHM kΩ Linear 5K Ohm Potentiometer features:- Horizontal variable resistance PCB- 5K Linear Code K0064 Available Price €0.20
Support for HC-SR04 Ultrasonic Sensor Support for ultrasounds, HC-SR04 distance meter. Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features: - Material: Acrylic - Color: transparent - Includes screws Code S0005 Available Regular price €1.45 -€0.50 Price €0.95
MH-Z19C Infrared Sensor module 5000ppm CO2 monitor HVAC PWM output UART CO2 sensor model MH-Z19C. High precision working voltage 5.0±0.1V DC. The measuring range is between 0 and 5000 ppm. It has a low power consumption. UART and PWM output. Code S0044 Backorder Price €29.49
Matrix Membrane Keyboard 4x4 Modulo High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side. Ideal for your Arduino projects, but can also be used with other microcontrollers. Matrix Membrane Keyboard 4x4 Modulo features: - Rating circuit, Max: DC 35V 100 mA - Cable length: 85 mm - Dupont 8 pin connector - Specific insulation: 100 M Ohm, 100V - Useful life: + 1 million uses - Contact parting: Code M0025 Available Price €1.79
Sonoff MiniR2 - Switch WiFi The Sonoff MINIR2is a WiFi-controlled universal switch, built with the ESP8266 chip. It works with the voltage of 230V and makes it possible to control any device anywhere in the world. Thanks to its size it is very mobile and fits in most power supplies. Code WS025 Available Regular price €9.95 -€2.50 Price €7.45
Converter Module RS485 a Transceiver TTL 485 Max485 5V PLC Converter Module RS485 a Transceiver TTL 485 Max485 5V PLC features: - Working voltage and TTL levels: 5V- Size: 44 x 14 mm Code C0013 Available Price €1.95
Soldering Tip Cleaning Ball It allows removing the solder residues from the tips.It cleans better and does not cause temperature drops like with sponges.You do not need extra water to clean the tip.Easy and effective cleaning at the tip.Soldering Tip Cleaning Ball features:- Dimensions: diameter 50mm Code H0010 Available Price €1.29
2x PCF8574P I/O Extension Board 8574 NXP - The PCF8574P is an 8-bit remote I / O expander for the I2C bus with 16-pin DIP packet interrupt. - Provides general-purpose remote I / O expansion via a two-wire, two-way I2C bus (Serial Clock (SCL), Serial Data (SDA)). - Devices consist of eight quasi-directional ports , 100KHz I2C bus interface, three hardware address inputs and interrupt output operating between 2.5V and 6V. - Quasi-bidirectional port can be independently assigned as one input to monitor interrupt status or keyboards or as an output to activate indicating devices like LEDs. - System Master can read from the input port or write to the output port through a single register. Code T0010 Available Price €1.15