Acrylic robot 4 DOF Arm without servo Robot arm set 4 DOF acrylic with screws and screwdriver for robotics projects.100% compatible with Arduino. Acrylic robot 4 DOF Arm without servo features: - Type: DIY kit robot arm 4 DOF- Degree: 4 degrees of freedom- Material: acrylic- For: 8 years and above- Weight: ~ 450 g- Does not include servos but it is imperative to have 4 micro servos sg90 to be able to mount it More informations: 1. 4 arm axes with more untrammeled and flexible experience.2. Most of the pieces are integrated in a perforated way at a time, which is very strong and easy to install.3. All movement joints are using high quality bearings with good precision. Code R0077 Available Price €20.99
LED Display 1-Digit 7-Segment Red Common Cathode LED Display 1-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 1- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common cathode connection- Screen size: 12.6x19x8 mm- This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0118 Available Price €0.85
5mm copper tape - Conductor 5mm copper tape Conductor features: material copper foil, size: 5 mm x30 m, copper foil thickness: 0.05 mm, conductive, adhesive, approx length: 30m. Applications: EMI and RF shielding, paper circuits, soldering, electrical repairs, slug repellent. Code H0172 Available Regular price €4.45 -€1.26 Price €3.19
Heart Rate Oximetry Sensor Module for Arduino MAX30100 This detection module that allows you to detect your heart rate and blood oxygen level from your Arduino project. You can monitor your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply press the sensor with your finger and wait for the reading of hemoglobin (Spo2), heart rate and Perfusion Index (PI%). It is a solution as an integrated heart rate sensor and pulse oximetry, which includes two LEDs, a photodetector and is optimized for analog low noise optics. Code S0148 Available Regular price €6.95 -€1.00 Price €5.95
Car Robot Tire Wheel Smart Car Car Robot Tire Wheel Smart Car features:- Dimensions of the wheel: - Diameter: 65mm - Width: 26 mm- Quantity: 1 unit Code R0009 Available Regular price €1.90 -€0.41 Price €1.49
65x Cable Jumper Male Lot of 65 Male-Male jumper cables. Characteristic: -No soldering required -You can easily modify or revise the circuits -Quantity: 65 cables of different lengths and colors -Cable lengths: 120mm, 150mm, 200mm, 240mm Code K0010 Available Regular price €3.49 -€0.60 Price €2.89
Water Level Sensor Module One Mega Pic Easily convert water level to analog signal The analog output signal can be read directly on the Arduino board Characteristic: - Operating voltage: 3.3V -5 V - Consumption: less than 20 mA - Sensor type: Analog - Operating temperature: 10º C -30º C - Detection area: 40 mm x 16 mm - Dimensions: 60 mm x 20 mm Code S0023 Available Price €1.39
16x2 1602 LCD display HD44780 Backlit Blue background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. 16x2 1602 LCD display HD44780 Backlit Blue background features: - LCD screen , 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code P0014 Available Regular price €2.65 -€0.75 Price €1.90
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €4.50
Relay Module DC 12V 10A 1 Channel Low/High Trigger Relay Module DC 12V 10A 1 Channel Low/High Trigger features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high) Code RL003 Available Price €2.29
Retroflag NESPi Case for RetroPie Raspberry Pi 3/2 model B and Raspberry Pi 3B + Attention: You need to download newest image "RetroPie 4.4" if you use this NESPi Case + with Raspberry Pi 3B +: https://retropie.org.uk/download/ Safe Shutdown and Safe Reset NESPi Case can have SAFE SHUTDOWN and SAFE RESET functions. (Scripts is necessary). Safe shutdown scripts: https://github.com/RetroFlag/> Code RA051 ✗ Out-of-Stock Price €19.90
ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 features: - Chip ENC28J60 Microchip- Module: 10Base-T- 3.3V power- SPI interface- 25Mhz speed- LED status LED- Hanrun network transformer- Network Interface board HR911105A- Operating temperature: -40ºC to + 85ºC- Dimensions: 55x 35x 16 mm Code W0002 Available Price €8.99
Grove - Red LED Grove module with a red LED light. Ideal for quick and easy connections thanks to the Seeed Grove connector. Code SS022 Available Regular price €2.79 -10% Price €2.51
Raspberry Pi 3 Modelo B + Kit 32GB The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @> Code RA059 ✗ Out-of-Stock Price €57.90
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
SIM900 Four Band GSM GPRS Module with Antenna shield for Arduino SIM900 Four Band GSM GPRS Module with Antenna shield for Arduino features: - GSM / GPRS SIM900 module-based development card / shield from Simcom - The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM Enhanced COM Commands). - The shield also has 12 GPIOs, 2 PWMs and a ADC of the SIM900 module (All of them are 2V8 logic) present on board. - Quad-Band 850/900/1800/1900 MHz: it would work on GSM networks in all countries of the world. - GPRS multi-slot class 10/8 - GPRS mobile station class B - Complies with GSM phase 2/2 + - Class 4 (2 W @> Code W0090 Available Regular price €25.99 -€3.50 Price €22.49
Lilypad Arduino compatible USB ATmega32u4 Board The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4.It has 9 digital input / output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery and a power button. restartIt contains everything necessary to support the microcontroller; simply connect it to a computer with a USB cable or a battery to start.The LilyPad Arduino USB differs from previous LilyPad cards in that the ATmega32U4 has built-in USB communication, eliminating the need for a separate USB to serial adapter. This allows the LilyPad Arduino USB to appear on a connected computer as a mouse and keyboard, as well as a virtual serial / COM (CDC) port. Code M0147 Available Regular price €7.99 -€1.00 Price €6.99
Time Switch Module 12V NE555 Monostable Switch Delayed This module is a timed switch that allows you to program several types of applications such as lights. Time Switch Module 12V NE555 Monostable Switch Delayed features: Code M0160 Available Regular price €4.59 -€0.59 Price €4.00
Cables with Crocodile Clips pack 10pcs Include 5 different colors, 1 unit of each color.Also available in batches of 5 and 2 cables. 10x Cables 50cm with Crocodile Clips features: -Length: 50cm-Colors: red, green, white, black and yellow-Cable diameter: 1,5mm -Quantity: 10 cables Code K0013 Available Price €2.95
BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.2 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €20.95 -€1.00 Price €19.95
BBC micro:bit V2.2 Go - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Regular price €23.95 -€0.96 Price €22.99
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €4.50
Relay Module DC 12V 10A 1 Channel Low/High Trigger Relay Module DC 12V 10A 1 Channel Low/High Trigger features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high) Code RL003 Available Price €2.29
Retroflag NESPi Case for RetroPie Raspberry Pi 3/2 model B and Raspberry Pi 3B + Attention: You need to download newest image "RetroPie 4.4" if you use this NESPi Case + with Raspberry Pi 3B +: https://retropie.org.uk/download/ Safe Shutdown and Safe Reset NESPi Case can have SAFE SHUTDOWN and SAFE RESET functions. (Scripts is necessary). Safe shutdown scripts: https://github.com/RetroFlag/> Code RA051 ✗ Out-of-Stock Price €19.90
ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 features: - Chip ENC28J60 Microchip- Module: 10Base-T- 3.3V power- SPI interface- 25Mhz speed- LED status LED- Hanrun network transformer- Network Interface board HR911105A- Operating temperature: -40ºC to + 85ºC- Dimensions: 55x 35x 16 mm Code W0002 Available Price €8.99
Grove - Red LED Grove module with a red LED light. Ideal for quick and easy connections thanks to the Seeed Grove connector. Code SS022 Available Regular price €2.79 -10% Price €2.51
Raspberry Pi 3 Modelo B + Kit 32GB The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @> Code RA059 ✗ Out-of-Stock Price €57.90
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
SIM900 Four Band GSM GPRS Module with Antenna shield for Arduino SIM900 Four Band GSM GPRS Module with Antenna shield for Arduino features: - GSM / GPRS SIM900 module-based development card / shield from Simcom - The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM Enhanced COM Commands). - The shield also has 12 GPIOs, 2 PWMs and a ADC of the SIM900 module (All of them are 2V8 logic) present on board. - Quad-Band 850/900/1800/1900 MHz: it would work on GSM networks in all countries of the world. - GPRS multi-slot class 10/8 - GPRS mobile station class B - Complies with GSM phase 2/2 + - Class 4 (2 W @> Code W0090 Available Regular price €25.99 -€3.50 Price €22.49
Lilypad Arduino compatible USB ATmega32u4 Board The LilyPad Arduino USB is a microcontroller board based on the ATmega32u4.It has 9 digital input / output pins (of which 4 can be used as PWM outputs and 4 as analog inputs), an 8 MHz resonator, a micro USB connection, a JST connector for a 3.7V LiPo battery and a power button. restartIt contains everything necessary to support the microcontroller; simply connect it to a computer with a USB cable or a battery to start.The LilyPad Arduino USB differs from previous LilyPad cards in that the ATmega32U4 has built-in USB communication, eliminating the need for a separate USB to serial adapter. This allows the LilyPad Arduino USB to appear on a connected computer as a mouse and keyboard, as well as a virtual serial / COM (CDC) port. Code M0147 Available Regular price €7.99 -€1.00 Price €6.99
Time Switch Module 12V NE555 Monostable Switch Delayed This module is a timed switch that allows you to program several types of applications such as lights. Time Switch Module 12V NE555 Monostable Switch Delayed features: Code M0160 Available Regular price €4.59 -€0.59 Price €4.00