Resistor 680R Ohm 5% 0,25W 1/4W Resistor 680R Ohm 5% 0,25W 1/4W features:- 680R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0012 Available Price €0.07
Rechargeable battery 9V 6F22 Ni-MH 250 mAh Ready to Use Rechargeable battery 9V 6F22 Ni-MH 250 mAh Ready to Use features: Code PP049 Available Price €4.95
SparkFun Biomedical sensor pad set 10pcs This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel. This is not a medical device and is to be used for strictly educational purposes. Code SP029 Available Price €10.70
DC Circular Electromagnet 12V 2kgf 3W High quality clamping electromagnet. Its supply voltage is 12V. The lifting capacity of up to 2 kg. The temperature limit reaches 130 degrees centigrade. Retention electromagnets are most often used for electric / magnetic locking of doors, flaps, and others. Use metal plates with a thickness starting from 3mm, this will ensure maximum retention force on the locking element. It is important to remove heat from the housing. The maximum force decreases as the coil temperature increases. This electromagnet will meet the expectations of even the most demanding user. Code F0006 ✗ Out-of-Stock Price €7.02
Pantalla LCD TFT 2.4 pulgadas 240x320 SPI - Pantalla LCD TFT 240x320 pixels- 262.000 posibles colores (18 bit)- Pixel: RGB vertical stripe- Controlador ILI9341 - Interface SPI - 8 bit interfaz digital, 4 bit líneas de control- Pantalla táctil resistiva 4 - wires- Ideal para proyectos con ARDUINO, Uno R3, MEGA2560 Enlaces útiles : Cableado de la pantalla LCD TFT 2.4 SPI - Conectar la pantalla LCD TFT 2.4 SPI con el módulo UNO Visualizar gráficos y textos en la pantalla LCD TFT 2.4 SPI Programar una calculadora táctil en la pantalla LCD TFT 2.4 SPI Code P0110 Available Regular price €7.93 -€1.00 Price €6.93
40x Cables Female-Male 20cm 40x Cables Female-Male 20cm features: -Length: 20cm-Quantity: 40 cables-Connectors have male and female header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0008 Available Price €2.06
Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor features: - Operating range: 0.2mm to 15mm - Receiver: Phototransistor - Emitter: Infrared Led - Wavelength: 950 nm Code S0026 Available Price €0.41
MQ-4 Gas Methane Sensor Module for Arduino MQ-4 Gas Methane Sensor Module for Arduino features:- Main chip: MQ-4 methane sensor and comparator LM393- Working voltage: 5V- Current: 150mA- Digital output: TTL 0/1- Analog output: analog voltage sensing value- Quick response features:- Detection concentration:200ppm- 10000ppm CH4, natural gas- Adjustable sensitivity with the potentiometer- Size: 32mm x 20mmx 18mm Code S0028 Available Price €2.44
MyoWare 2.0 Cable Shield This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person. Code SP045 ✗ Out-of-Stock Price €6.19
MyoWare Shield - Mini protoboard for MyoWare sensor Simple breadboard for your MyoWare Muscle Sensor. You can use the provided area of the shield to solder in any custom circuit you can think of. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid. Code SP070 Last items in stock Price €2.72
Heartbeat sensor for Arduino This detection module combines a phototransistor and an LED that, when placed on a finger or ear lobe, provides a reading.By reading this signal you can interpret a change in the signal as a heartbeat.Keep in mind that this is a sensitive module and you will experience the noise from home lights and other sources, since minimizing the lighting of the unit will help get the readings. Heartbeat sensor Arduino features: - Connection pins:- S: Analog output- (+): Power supply 3-5 VDC,- (-): GND.- Length: 18mm,- Width: 18mm,- Height: 4mm,- Operating temperature: -40ºC to + 85ºC. Code S0136 Available Regular price €7.84 -€1.50 Price €6.34
Gravity: Analogue heart rate monitor sensor (ECG) for Arduino The DFRobot heart rate monitor sensor (SEN0213) is used to measure the electrical activity of the heart. Code DF015 Last items in stock Price €23.93
MyoWare Muscle Sensor Development Kit - OBSOLETE This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together. Code SP074
Digital finger pulse oximeter ZM-700-0 With this small and simple device, you can control your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply insert your finger and wait for the reading of haemoglobin (Spo2), heart rate and Perfusion Index (PI%). The heart rate is also graphically displayed. You can rotate the screen to see it in its 4 positions. High precision device, with low power consumption and automatic shutdown. Code H0243 Available Regular price €16.45 -€1.50 Price €14.95
SparkFun Biomedical sensor pad set 10pcs This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel. This is not a medical device and is to be used for strictly educational purposes. Code SP029 Available Price €10.70
MyoWare 2.0 Muscle Sensor Development Kit Sparkfun MyoWare 2.0 Muscle Sensor Development Kit is an all-in-one electromyography (EMG) sensor kit compatible with Arduino. Just snap on a MyoWare 2.0 Shield, add some EMG sensor pads, connect the sensor to a muscle group and flex! The kit also includes the SparkFun RedBoard Plus is an Arduino compatible board and the MyoWare 2.0 Arduino Shield to connect the MyoWare® 2.0 sensor via a cable to the Arduino. Code SP046 Last items in stock Price €151.20
MyoWare 2.0 Muscle Sensor Basic Kit Sparkfun sensor MyoWare® 2.0 from Advancer Technologies is a newer version of this producer's bestseller. The MyoWare 2.0 muscle sensor included in this kit has been redesigned from the ground up with a new compact and easy-to-use design, and has been updated with the latest, most advanced chipset to improve sensor performance and reliability. In addition, MyoWare has developed a range of shields that work with the sensor (in our LED shield offering, displaying sensor readings as LED lights). Code SP044 Available Price €100.79
mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module - human presence, FMCW, Configurable Underlying Parameter, Arduino support, Home Assistant, ESPHome Code SS050 Last items in stock Price €9.91
MyoWare 2.0 Cable Shield This Cable Shield provides a 3.5mm connector where you can connect a three-electrode sensor cable, allowing you to test and use the MyoWare 2.0 muscle sensor without actually connecting it to your person. Code SP045 ✗ Out-of-Stock Price €6.19
MyoWare Shield - Mini protoboard for MyoWare sensor Simple breadboard for your MyoWare Muscle Sensor. You can use the provided area of the shield to solder in any custom circuit you can think of. This shield provides 8 x 15 solderable through holes on a standard 0.1" grid. Code SP070 Last items in stock Price €2.72
Heartbeat sensor for Arduino This detection module combines a phototransistor and an LED that, when placed on a finger or ear lobe, provides a reading.By reading this signal you can interpret a change in the signal as a heartbeat.Keep in mind that this is a sensitive module and you will experience the noise from home lights and other sources, since minimizing the lighting of the unit will help get the readings. Heartbeat sensor Arduino features: - Connection pins:- S: Analog output- (+): Power supply 3-5 VDC,- (-): GND.- Length: 18mm,- Width: 18mm,- Height: 4mm,- Operating temperature: -40ºC to + 85ºC. Code S0136 Available Regular price €7.84 -€1.50 Price €6.34
Gravity: Analogue heart rate monitor sensor (ECG) for Arduino The DFRobot heart rate monitor sensor (SEN0213) is used to measure the electrical activity of the heart. Code DF015 Last items in stock Price €23.93
MyoWare Muscle Sensor Development Kit - OBSOLETE This is the MyoWare Muscle Sensor Development Kit, an Arduino-powered electromyography (EMG) sensor kit that gives you the MyoWare, each MyoWare Shield and everything you need to connect them all together. Code SP074
Digital finger pulse oximeter ZM-700-0 With this small and simple device, you can control your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply insert your finger and wait for the reading of haemoglobin (Spo2), heart rate and Perfusion Index (PI%). The heart rate is also graphically displayed. You can rotate the screen to see it in its 4 positions. High precision device, with low power consumption and automatic shutdown. Code H0243 Available Regular price €16.45 -€1.50 Price €14.95
SparkFun Biomedical sensor pad set 10pcs This a pack of 10 disposable electrodes is for biomedical measuring including EEG. Best suited for monitoring of neuro- and bio-feedback purposes. These are a single use, however very user friendly thanks to the latex-free gel. This is not a medical device and is to be used for strictly educational purposes. Code SP029 Available Price €10.70
MyoWare 2.0 Muscle Sensor Development Kit Sparkfun MyoWare 2.0 Muscle Sensor Development Kit is an all-in-one electromyography (EMG) sensor kit compatible with Arduino. Just snap on a MyoWare 2.0 Shield, add some EMG sensor pads, connect the sensor to a muscle group and flex! The kit also includes the SparkFun RedBoard Plus is an Arduino compatible board and the MyoWare 2.0 Arduino Shield to connect the MyoWare® 2.0 sensor via a cable to the Arduino. Code SP046 Last items in stock Price €151.20
MyoWare 2.0 Muscle Sensor Basic Kit Sparkfun sensor MyoWare® 2.0 from Advancer Technologies is a newer version of this producer's bestseller. The MyoWare 2.0 muscle sensor included in this kit has been redesigned from the ground up with a new compact and easy-to-use design, and has been updated with the latest, most advanced chipset to improve sensor performance and reliability. In addition, MyoWare has developed a range of shields that work with the sensor (in our LED shield offering, displaying sensor readings as LED lights). Code SP044 Available Price €100.79
mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module mmWave 24GHz Sensor - Human Static Presence Lite Human Presence Module - human presence, FMCW, Configurable Underlying Parameter, Arduino support, Home Assistant, ESPHome Code SS050 Last items in stock Price €9.91