Proximity sensors

Ideal for projects with ARDUINO, Smart Car
Detects transparent and translucent obstacles
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:
- Current consumption: up to 100 mA
- Supply voltage 5V
- Current consumption <25mA
- Response time of 2 ms
- Measured distance: 3-80cm 15st angle
- Screw to adjust the sensitivity, the back
- Output status led indicator
- Operating temperature: -25°C - + 55°C
- Material: high-strength plastic
- Type of output: normally open, NPN
- Dimensions: 18 mm in diameter, Length 45 mm
- Cable length 55cm
- Departures:
      - Brown: +
      - Blue: -
      - Black: OUT

M18 Inductive Proximity Sensor features:
- Inductive proximity sensor detection switch LJ18A3-8-Z / BX
- NPN DC6-36V
- A Often used for 3D printer bed leveling
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- NPN NO (Normal Open )
- Detecting distance 8mm
- DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum - Operating temperature -25 ° C to + 70 ° C (Non-freezing condition)
- Head diameter 18 mm
- Size 6.9 x 2cm
- Cable length 90cm

M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer features:
- This sensor can be configured as auto Z axis level
- Sensor detection switch inductive proximity LJ12A3-4-Z / BY
- PNP DC6-36V
- Often used for 3D printer bed leveling
- Typical application: printer bed level sensor 3D
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- PNP NO (Normal Open)
- Detecting Distance 4mm - DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum
- Operating temperature -25 ° C at + 55 ° C (Non-freezing condition)
- Head diameter 12 mm
- Size 6.2 x 2cm
- Cable length 100cm

M12 Inductive Proximity Sensor NPN DC 6-36V LJ12A3-4-Z/BX 3D Printer features:
- This sensor can be configured as Z axis auto level
- Inductive proximity sensor detection switch LJ12A3-4-Z / BX
- NPN DC6-36V
- Often used for 3D printer bed leveling
- Typical application: 3D printer bed level sensor
- Type of Cylindrical DC cable 3 type of cable (black, brown, blue)
- Inductive sensor type
- NPN NO (Normal Open)
- Detecting Distance 4mm
- DC supply voltage 6-36V
- 300mA current output
- 0.5KHz response frequency
- Detects iron / aluminum
- Operating temperature -25 ° C to + 55 ° C (Condition non-freezing)
- Head diameter 12 mm
- Size 6.2 x 2cm
- Cable length 100cm

Inductive Proximity Sensor PL-05N NPN Limit Switch is used for controlling machinery as part of a control system, as a safety interlock, or to count objects passing a point. Inductive proximity sensor PL-05N 5mm with NPN output features:
- Manufacturer: Fotek,
- Square Type,
- Sensing distance: 5mm,
- Operating voltage: 10 - 30 VDC,
- Response frequency: 800Hz,
- Output method: NPN, 150mA load,
- Hysteresis: <10% of sensing distance,
- Protection degree: IP67,
- Working temperature/Hum: -20ºC - +80ºC, 35% - 90% RH,
- Body dimension: 30.5x17.9x10.2mm (LxWxH),
- Mounting Method: Flush,
- Sensing Direction: Horizontal,
- Materia Housing: High-impact plastic,
- Screw hole: 3.2mm, Pitch: 10.5mm,

Inductive Proximity Sensor PL-05P PNP Limit Switch is used for controlling machinery as part of a control system, as a safety interlock, or to count objects passing a point. Inductive proximity sensor PL-05P 5mm with PNP output features:
- Manufacturer: Fotek,
- Square Type,
- Sensing distance: 5mm,
- Operating voltage: 10 - 30 VDC,
- Response frequency: 800Hz,
- Output method: PNP, 150mA load,
- Hysteresis: <10% of sensing distance,
- Protection degree: IP67,
- Working temperature/Hum: -20ºC - +80ºC, 35% - 90% RH,
- Body dimension: 30.5x17.9x10.2mm (LxWxH),
- Mounting Method: Flush,
- Sensing Direction: Horizontal,
- Materia Housing: High-impact plastic,
- Screw hole: 3.2mm, Pitch: 10.5mm,