Rechargeable battery XTAR 18650 2200mAh Li-ion Rechargeable battery XTAR 18650 2200mAh Li-ion features: - With PCB protection circuit that protects the battery against overcharges and over discharges, increasing battery life - Quantity: 1 unit - Authentic Protection Battery Code PP019 Available Price €7.43
LM2596 DC Voltmeter Converter 3A Step Down Adjustable Power Descent module.Use a multimeter to check the output voltage and adjust the potentiometer.Control of tension.LM2596 DC Voltmeter Converter 3A Step Down Adjustable Power features:- Input voltage: 4.5-38V- Output voltage: 1.25-36.5V- Current output: 2A (max 3A with heat sink)- Operating temperature: -40 to + 85 ºC- Operating frequency: 150KHz- Efficiency conversion: up to 92%- Load Regulation: +/- 0.5%- Voltage Regulation: +/- 2.5%- Protection over temperature: the output switches off automatically- Size: 62mm x 38mm x 15mmPrincipal functions:- Step-down converter with overcurrent protection- Voltmeter up to 40V, remember to set the input voltage to 4.5V Code A0013 Available Price €3.30
Power Supply DC 5V 10A 50W LED Strip Power Supply DC 5V 10A 50W LED Strip features: - Supply voltage: 110 / 230V AC - Output voltage: 5V DC - Output amperage: 10A - Power at 5V: 50W - Dimensions: 159mm x 99mm x 43mm Code A0056 Available Regular price €12.36 -€5.00 Price €7.36
Power supply DC 12V 3A 36W Power supply DC 12V 3A 36W features:Supply voltage: 110 / 230V AC Output voltage: 12V DC - Output amperage: 3A Power at 12V: 36W Dimensions: 84mm x 58mm x 32mm Code A0060 Available Price €4.92
Power supply DC 12V 1.25A 15W Power supply DC 12V 1.25A 15W features: - Supply voltage: 110 / 230V AC - Output voltage: 12V DC - Output amperage: 1.25A - Power at 12V: 15W - Dimensions: 70mm x 39mm x 31mm - With LED strip Code A0052 Available Price €3.96
LM2577S 3A DC Boost Step-Up Controller Adjustable Step-Up LM2577S 3A DC Boost Step-Up Controller Adjustable Step-Up features: - Step-up stepper adjustable module. - Output voltage may be greater than the input - Use a multimeter to check the output voltage and adjust the potentiometer - Chip LM2577S-ADJ - Input voltage: 3.5V -35V - Output voltage: 4-35V - Current output: 2A, max. 3A with heat sink - Power max. 20W - Operating temperature: -40 to + 85 ºC - Conversion efficiency: up to 92% - Size: 44 x 30 mm Code A0066 Available Price €3.21
Battery Compartment 9V 6LF22 Power cable Battery Compartment 9V 6LF22 Power cable features: - Cable 17cm long- DC connector 5.5 / 2.5mm- Dimensions 54x 30x 20mm- Batteries 6LR61, 6LF22, X22 or compatible- It has 3 holes for anchoring to plate or chassis Code PP010 Available Price €0.98
Battery Holder Button 3V CR2032 PCB CR2032 PCB Battery Holder Button 3V CR2032 PCB CR2032 PCB features: - Battery compartment for PCB printed circuit- Quantity: 1 unit Code PP022 Available Regular price €1.07 -€0.30 Price €0.77
MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features: - Booster module - The output voltage may be greater than the input voltage - Use a multimeter to check the output voltage and adjust the potentiometer - Input voltage: 2-24V - Output voltage: 5-28V - Current output: 2A - Operating temperature: -40ºC to + 85ºC - Conversion efficiency: up to 93% - Size: 17.5 x 30 mm Code A0065 Available Price €1.40
600W Boost Converter Booster Module DC voltage 12V to 80V 600W Boost Converter Booster Module DC voltage 12V to 80V features: - Input voltage: 10V-60V - Output voltage: 12-80V (adjustable) - Output current: 10A - Input current: 15A maximum - Output power: 600W maximum - Conversion efficiency: up to 95% (input 30V, output 40V 5A 93%) - Wiring: solderless terminal - The minimum difference between the output and input voltage: 2V - The ambient temperature exceeds 40 ° C, increase the dissipation of heat - Short circuit protection: If between reverse polarity protection: None - Size: 85 x 63 x 64 mm - Weight 275g Applications: Code A0009 Last items in stock Price €11.98
Battery holder 2x 18650 3,7V Parallel Lithium Battery Instruction: - The drawing of the polarities is not correct, it is wrong - Put the batteries in parallel Characteristic: - Cable 15cm long - Measures 74x42x 20mm - Weight: 10 gr. (Approx.) - Stack length max 67mm Code PP016 Available Price €1.53
Adapter Battery 9V 6F22 Jack Connector DC Ideal to power your Arduino board through the power input.Adapter Battery 9V 6F22 Jack Connector DC features:- Cable 7cm long- Battery connector 9V, 6F22- Male connector DC 5.5 / 2.5 Code PP011 Available Price €0.62
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Regular price €21.90 -€2.00 Price €19.90
Lithium Battery 3V CR2032 Button with PCB Pins Lithium Battery 3V CR2032 Button with PCB Pins features: - 3V battery for horizontal mounting PCB printed circuit- Quantity: 1 unit- Diameter: 20mm- Voltage: 3V- Capacity: 220mAh Code PP027 Available Regular price €1.56 -€0.20 Price €1.36
4x AA battery holder 4-battery holder with 6V switch Includes a switch to output the voltage built into the case itself. It has a cover for protect the batteries. The cover has perforation in case you want to secure it with a screw (not included). Characteristic: - Cable 12cm long - Measures 70x 65x 18mm - Battery length max 50mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7) Code PP006 Available Price €1.53
Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh features: - 9V Varta Industrial 6F22 Battery - High quality, made in Germany - Quantity: 1 unit Code PP021 Available Price €1.40
Solar panel DIY 6V 1.1W 200mA Solar panel DIY 6V 1.1W 200mA features: - DIY Mobile Photovoltaic Charger - Working Voltage: 6V - Output Power: 1.1W - Working current: max. 200 mA - Product size: 112x 84x3 mm Code A0064 Available Price €4.88
Wall charger 2x USB 5V / 2.4A + USB Type-C cable white Wall charger with 2 USB ports with small size and low weight. Code KH010 Available Price €4.95
USB car charger QC 3.0 VOOC 5A 22.5W Grey A compact gadget with USB port, perfect for charging the batteries of mobile devices such as smartphones and tablets. The charger supports the most popular Quick Charge (QC 3.0 + QC 2.0) and VOOC fast charging technologies. Code KH013 Available Price €4.95
Samsung USB Wall Charger USB-C 15W PD AFC black Fast AC charger (EP-T1510NBEGEU). Features a USB Type-C port that allows charging up to 15W. Allows fast charging of devices, including Power Delivery and AFC standards. It is made of fireproof PC material. It has been equipped with many protections, such as overheating, overvoltage, high voltage or overcharging. Code KH016 Available Price €13.21
Mini DC Converter 1.8A Downstream Voltage Regulator 4.7-23V to 1.0-17V Mini DC Converter 1.8A Downstream Voltage Regulator 4.7-23V to 1.0-17V features: - Voltage Drop Module - Use a multimeter to check the output voltage and adjust the potentiometer - Small size: 17mm x 11mm - Input voltage: 4.75-23V - Output voltage: 1.0-17V - Current output: 1.8A (peak max. 3A) - Operating temperature: -40 to + 85 ºC - Operating frequency: 240kHz - Conversion efficiency: up to 96% - Output ripple: 30mV (no-load) - Voltage regulation: ± 2.5% Code A0024 Available Price €2.06
Power Supply Transformer 220V AC/DC 2A 12V Power Supply Transformer 220V AC/DC 2A 12V features:- Input voltage: 100~240V 50Hz- Output voltage: DC 12V- Output current: 2A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0015 Available Price €3.96
Solar Power Management Module, for 6V~24V Solar Panel The solar power management module is designed for 6V~24V solar panel. It can charge Li 3.7V battery through solar panel or USB connection, and provides 5V/1A regulated output. Code WV002 Available Price €10.70
Power Supply Transformer 220V AC/DC 1A 9V Power Supply Transformer 220V AC/DC 1A 9V features:- Input voltage: 100 ~ 240V 50Hz- Output voltage: DC 9V- Output current: 1A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0067 Available Price €3.30
Solar Power Manager 5V The solar power management module with the CN3065 chip is ideal for IoT (Internet of Things) projects with renewable energy. Compared to the previous version of the module, improvements have been made to the energy management of the connected battery. Code DF025 Available Regular price €14.46 -€4.00 Price €10.46
Power Supply Transformer 220V AC/DC 1A 5V Power Supply Transformer 220V AC/DC 1A 5V features:- Input voltage: 100~240V 50Hz- Output voltage: DC 5V- Output current: 1A- DC connector: 5.5 mm x 2.1 mm- Cable length: Approx. 90 cm- Indicator of operation: LED diode Code A0069 Available Price €3.30
Power Supply Transformer 220V AC/12V DC 1A Power Supply Transformer 220V AC/12V DC 1A features: - Input voltage: 100 ~ 240V 50Hz- Output voltage: DC 12V- Output current: 1A- DC connector: 5.5 mm x 2.1 mm- Cable length: approx. 90 cm- Indicator of operation: LED diode Code A0010 Available Price €3.30
USB / USB wall charger Type C Power Delivery Quick Charge 3.0 3A 22.5W white Wall charger with 2 USB ports - type A and type C. Complies with Power Delivery and Quick Charge 3.0 requirements. Code KH040 Available Price €6.60
Fujitsu AA 2000 mAh Ni-Mh Rechargeable Battery Characteristic: - For long periods of storage it must be stored below 45 ° C - After periods of Long storage will probably need to do a few charge cycles to increase capacity again - Quantity: 1 unit Precautions: No Change polarity. Do not heat the battery, or expose it to high temperatures. Do not wet or expose to high humidity environments. Code PP026 ✗ Out-of-Stock Price €1.89
SONOFF Micro - Smart 5V USB Wi-Fi Mini Adapter, Smart Switch for Alexa/Home compatible USB devices This USB adapter is a perfect wireless switch for controlling all kinds of devices, lights or charging your devices, from your mobile or your voice assistant such as Alexa or Google Home. Sonoff Micro allows you to have intelligent control of your devices, as long as your mobile has a network, you can switch them on or off remotely from anywhere and at any time. You can automate routines by setting schedules for your devices, making your day-to-day life easier and more convenient. The free eWeLink application allows you to control your devices easily. Code WS022 Available Regular price €6.60 -€2.00 Price €4.60
Battery holder 2x AA Battery holder with switch Includes a switch to output the voltage built into the case itself. It has a cover to protect the batteries. The cover has perforation in case you want to secure it with a screw (not included). Battery holder 2x AA Battery holder with switch features: - Cable 15cm long - Measurements 68x 32x 18mm - Battery length max 50mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7) Code PP005 Available Price €1.15
8A DC Downstream Converter 8-40V to 1.25-35V Current Control XL4016 A high-performance regulator-booster. 24V battery charger - DC / CV method. Power supply of the laptop from a 12V car battery. A high-performance dimmer-regulator. Charger for Li-Ion, Li-Po batteries etc. - CC / CV method. LED Constant current driver for LED diodes. Characteristic: - Input voltage: 6V -40V - Output voltage: 1.25-35V (adjustable) - Output current: 8A, (10A maximum) - Output power: 300W maximum - Efficiency of Conversion: up to 95% - Wiring: Solderless terminal - Operating frequency: 300kHz - Ambient temperature exceeds 40 ° C, increase heat dissipation - LED indicator two-color; - Charge red - Fully charged light green - No charge green Code A0011 Available Price €6.57
150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car A high-performance voltage regulator-riser 12V laptop power supply car accumulator150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car features:- Input voltage: 10V-32V- Output voltage: 12-35V (adjustable)- Output current: 6A maximum- Input current: 10A maximum- Output power: 100W of natural cooling (MAX), plus 150W (MAX) fan- Conversion efficiency: up to 94% (2.5 A 16V Input Output 19V when measured - only as a reference)- Wiring: seamless terminal- Operating temperature: industrial grade (-40 „ƒ to 85 „ƒ) (room temperature exceeds 40 degrees, use of lower power, or add fan)- Current without load: 25 mA typical Code A0006 Available Price €4.12
16-bit I2C ADS1115 module, 4-channel ADC with professional gain amplifier PGA The ADS1115 is an external 16-bit ADC + a built-in programmable gain amplifier (or PGA), which can be very useful for certain Arduino and ESP8266 projects. This is ideal when more resolution or more analogue pins are required. You get better accuracy, as well as relieving the processor of this burden. Code M0226 Available Price €4.92
Rechargeable Battery Samsung ICR18650 2600mAh Li-ion Characteristic: - Lithium Battery WITHOUT Protection - Nominal capacity: 2600mAh (discharge of 0.2C, 2.75V) - Minimum capacity: 2550mAh (0.2C, 2.75V discharge) - Charging voltage: 4.2 ± 0.05 V - Nominal voltage: 3.63V - Charging method: DC-CV (constant voltage with current limited) - Charging current: standard charge: 1300mA, fast charge: 2600mA - Charging time: standard charge: 3 hours, fast charge: 2.5 hours - Max. Charging current: 2600mA (ambient temperature 25 °) - Max. Discharge current: 5200mA (ambient temperature 25 °) - Discharge cut-off voltage: 2.75V - Cell weight: 47.0g maximum - Cell dimension: Height: 65.00 mm max., Diameter: 18.40 mm max. Code PP018 ✗ Out-of-Stock Price €4.95
Rechargeable Battery XTAR 18650 2600mAh Li-ion Rechargeable Battery XTAR 18650 2600mAh Li-ion features: - With PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life - Quantity: 1 unit Code PP028 ✗ Out-of-Stock Price €8.26
AMS1117 Buck fixed output module 3.3V 800mA AMS1117 Buck fixed output module 3.3V 800mA features: - Based on AMS1117-3.3V regulator - Input Voltage: 4.5 - 12Vdc - Output Voltage: 3.3 Vdc (+/- 0,05V) - Max.output current: 800mA - Operating temperature: -40ºC to + 150ºC - Dimensions: 25mm x 12mm Code A0023 Available Price €1.23
Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down features:- Based on the MP1584EN regulator- Output Voltage: 1.6V - 26V DC (adjustable)- Input Voltage: 4.5V - 28V DC- Max. Output Current: 3A (with heat sink)- Frequency: 1MHz- Conversion Efficiency (1A): 94%- Short circuit protection- Protection against overheating- Operating temperature: -40ºC to + 85ºC- Measures 22 x 17 x 4 mm Code A0007 Available Price €1.61
5x 9v Battery Adapter Connector 6F22 with Cable Ideal to power your Arduino board through the power input. 5x 9v Battery Adapter Connector 6F22 with Cable features: - Cable 15cm long - Battery connector 9V, 6F22 Code PP013 Available Price €0.45
Battery holder 2x CR2032 Switch Characteristic: - Button cell battery - For 20mm diameter battery type CR2032 - ON / OFF switch - Dimension: 50mm (L) x 23mm (W) x 6mm (D) Code PP23 Backorder Price €0.98
4x AA 6V battery holder with DC connector 4x AA 6V battery holder with DC connector features: - Cable 12cm long - Measurements 62x56x 16mm - Battery length max 50mm - Compatible batteries ( LR06, R06, MN1500, AM3, UM3, HP7) Code PP004 Available Price €1.48
Battery holder 4x AA 6V LR06 Battery holder 4x AA 6V LR06 features: - Cable 13cm long - Measurements 62x56x 16mm - Battery length max 50mm - Compatible batteries ( LR06, R06, MN1500, AM3, UM3, HP7) Code PP003 Available Price €1.23
Battery holder 4x AAA 6V Characteristic: - Cable 13cm long - Measurements 49x 52x 13mm - Battery length max 44mm - Compatible batteries (LR03, 24A, R03, RX03, MN2400, AM4, UM4) Code PP001 Available Price €0.98
Battery Holder 6x AA LR06 Ideal to power your Arduino board.Battery Holder 6x AA LR06 features:- Cable 12cm long,- Measures 90x 55x 15mm,- Max 50mm pile length,- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7). Code PP007 Available Price €1.45
Power Supply 12V 30A 360W Characteristic: - Supply voltage: 110 / 230V AC - Output voltage: 12V DC - Output amperage: 30A - Power at 12V: 360W - Dimensions: 215mm x 115mm x 50mm Code A0129 Available Regular price €23.93 -€4.00 Price €19.93
Panasonic rechargeable battery NCR18650B 3400mAh Li-ion Panasonic rechargeable battery NCR18650B 3400mAh Li-ion 3,6V features: - Nominal capacity: 3350mAh (0.2C, 2.5V discharge) - Minimum capacity: 3250mAh (0.2C, 2.5V discharge) - Charging voltage: 4.2 ± 0.05 V - Nominal voltage: 3.6V - Charging method: CC-CV (constant voltage with limited current ) - Charging current: standard charge: 1625mA, - Charging time: standard charge: 4 hours, - Max. Discharge current: 6500 mA (ambient temperature 25 °) - Discharge cut-off voltage: 2.5V - Cell weight: 47.5g maximum - Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum - Operating temperature: charge: 0 to 45 ° C, discharge: -20 to 60 ° C Code PP025 ✗ Out-of-Stock Price €8.22
3A DC Converter 4-53V Adjustable LM2596H Step Down Source Wide range of voltages, improved version. Drop module. They will use a multimeter to Check the output voltage and adjust the potentiometer. 3A DC Converter 4-53V Adjustable LM2596H Step Down Source features: - Based on the LM2596HVS-ADJ regulator - Rectification: Asynchronous - Output Voltage: 3v ~ 40v DC (adjustable) - Input Voltage: 4.5v - 53v DC - Max Output Current: 3A (with heat sink) - Ripple in output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2,5% - Operating temperature: -40ºC to + 85ºC - Measurements: 43x 21x 14 mm Code A0018 Available Price €2.31
XL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596 Descripción:Chip XL4015 - Upgrade of the LM2596Drop moduleUse a multimeter to check the output voltage and adjust the potentiometerVoltage controlXL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596 features:- Input voltage: 4.5V-38V- Output voltage: 1.25-36.5V- Current output: 4.5A (max 5A)- Output power: 75W maximum- Operating temperature: -40 to + 85 ºC- Operating frequency: 180KHz- Efficiency conversion: up to 96%- Short circuit protection: Yes (limited current 8A)- Protection over temperature: the output switches off automatically- Size: 62mm x 38mm x 15mmPrincipal functions:- Step-down converter with overcurrent protection- Li-Po battery charger, Li-Ion Code A0012 Available Price €4.09
Battery Holder 6x AA with DC Connector 9V LR06 Ideal to power your Arduino board.Battery Holder 6x AA with DC Connector 9V LR06 features:- Cable 12cm long,- Measures 90x 55x 15mm,- Max 50mm pile length,- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7). Code PP008 Available Price €1.53
DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module Boost converter provides stable performance at 5V output even when operating with two AA batteries:- With a 1.5V AA battery-output 5V / 200 ~ 300mA- With two batteries 1.5V AA-output 5V / 500 ~ 600mAIt can be used for power applications and mobile devices to charge phones, cameras that use battery power.DC-DC Boost Module 0.9~5V 600mA Converter Step Up Module features:- Input Voltage: 1.5V - 5.0V DC- Output Voltage: 5V- Max Output Current: 600mA- LED operating indicator (input voltage min 2V)- Protection over short circuit: no- Measures of PCB 36 x 16 Code A0001 Available Price €1.53
Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB Boost converter provides stable performance at 5V output even when operating with two AA batteries:- Input voltage min 2V-output 5V/ ~ 400mA- Input voltage min 3V-output 5V/ ~ 800mA- Input voltage min 3.5V-output 5V/ ~ 1200mAIt can be used for power applications and mobile devices to charge phones, cameras that use battery power.Boost Converter DC-DC 2V-5V to 5V 1200mA Power Charger USB features:- Input Voltage: 2V - 5.0V DC- Output Voltage: 5.1V + / 0.1V- Max Output Current: 1200mA- LED operation indicator- Protection over short circuit: no- Measures of PCB 26 x 18 Code A0002 Available Price €1.82
DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo Descent module.Use a multimeter to check the output voltage and adjust the potentiometer.Control of voltage and current.DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo features:- Input voltage: 4-38V- Output voltage: 1.25-36V- Current output: adjustable, 4.5A (max 5A)- Output power: 75W maximum- Operating temperature: -40 to + 85 ºC- Operating frequency: 180KHz- Efficiency conversion: up to 96%- Short circuit protection: Yes (limited current 8A)- Protection over temperature: the output switches off automatically- Size: 62mm x 26mm x 14mmPrincipal functions:- Step-down converter with overcurrent protection- Li-Po battery charger, Li-Ion Code A0014 Available Price €2.88
Boost Buck Step Up-Down Automatic Converter Descripción:This is a powerful, efficient step-up (boost) and step-down (buck) switching voltage converter. It will automatically change between boosting and bucking to maintain a stable output voltage, regardless of the input.The output is set with a multi-turn potentiometer.Boost Buck Step Up-Down Automatic Converter features:- IC Chip: LM2577S-ADJ and LM2596S-ADJ - Module Properties: non-isolated Boost Buck constant current, constant voltage module (CC CV) charging module- Scope: High-power constant current LED driver.- Battery charger (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride batteries (battery) charger, solar panels, wind generators. Code A0017 Available Price €7.84
LED Power Supply Transformer DC 12V 5A 60W LED Power Supply Transformer DC 12V 5A 60W features:- Supply voltage: 110/230V AC- Output voltage: 12V DC- Output amperage: 5A- Power at 12V: 60W- Dimensions: 110mm x 78mm x 36mm Code A0053 ✗ Out-of-Stock Price €9.05
Battery holder 1x 18650 3.7V Power cable Characteristic: - Cable 15cm long - Measurements 74x21x 19mm - Weight: 8 gr. (approx.) - Stack length max 67mm Code PP014 Available Price €0.82
4x 18650 3.7V Parallel Lithium Battery 4x 18650 3.7V Parallel Lithium Battery features: - Cable 10cm long - Measures 80x76x 20mm - Stack length max 67mm Code PP017 Available Price €2.39
Boost Adjustable Power Converter LM2587 5A DC 4.5-35V A high-performance step-up regulator Boost Adjustable Power Converter LM2587 5A DC 4.5-35V features: - Input voltage: 3.5 ~ 32v - Output voltage: 4.5 ~ 35v (adjustable) - Output current: 3A, maximum 5A (heatsink heat is required) - Conversion efficiency: up to 90% - Operating frequency: 100KHz - Short circuit protection: current limiting - Operating temperature: industrial grade (- 40 to 85) - PCB dimensions: 52 x 37 mm Code A0019 Available Price €5.78
6V 4.5W DIY Solar Panel 6V 4.5W DIY Solar Panel features: - Mobile DIY System Photovoltaic Charger Cell -Work Voltage: 6V -Power output: 4.5W -Working current: 0-750mA -Product size: 165x165x3 mm Code A0063 ✗ Out-of-Stock Price €10.65
Solar Panel DIY 4V 30mA DIY mobile photovoltaic panel with working voltage of 4V and max. working current of 30mA. Code A0061 Available Price €2.06
DC Step Down Converter 3.3V 2A 3.4-6V DC Step Down Converter 3.3V 2A 3.4-6V features: - Voltage drop module- Input voltage: 3.4-6V- Output voltage: 3.3V- Current output: adjustable, max 2A- Operating temperature: -40 to + 85 ºC- Operating frequency: 1.5MHz- Efficiency conversion: up to 95%- Short circuit protection: Yes (limited current 8A)- Protection over temperature: the output switches off automatically- Size: 12 x 15 mm- Full charge output ripple: Vpp <50 mV- Output accuracy: ± 0.1V- Current IQ without load: 0.2mA- Stop current (EN) <10uA Code A0068 Available Price €2.79