120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:
- Length: 20cm
- Quantity: 120 cables
- Female-Female 40 units
- Male-Male 40 units
- Female-Male 40 units

120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:
- Length: 20cm
- Quantity: 120 cables
- Female-Female 40 units
- Male-Male 40 units
- Female-Male 40 units

Latching push-button 12V normally open
- For panel N / A NO 2A 36V Stainless Steel on / off
- Type of operation: On / Off
- Contact switch: 1 NA (normally open)
- Max Switch Classification: 2A / 12VDC
- Body material: Stainless steel
- Button Material: Stainless steel
- Protection Classification: IP67 / IK08
- Operating temperature: -20C + 55C
- Color: Red

  - The ideal kit to build a robot car
- Includes battery compartment for 6 AA batteries and ignition switch. (batteries not included)   2WD Smart Robot Car Distance UNO Kit DIY features:
  - Robot platform with 2 wheels and idler
- UNO CH340 board compatible with Arduino
- Prototype plate 170 points
- Micro servo 9g
- Platform for servo
- Distance sensor HC-SR04
- Sensor shield for sensors
- L298N motor controller   Motor 2WD Smart Robot Car Distance UNO Kit DIY features:
  - Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc

- The ideal kit to build a robot car
- Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included)
2WD Smart Robot Car Kit DIY features:
- Robot platform with 2 wheels and idler
- UNO CH340 board compatible with Arduino
- Prototype plate 170 points
- Micro servo 9g
- Platform for servo
- Distance sensor HC-SR04
- Sensor shield for sensors
- L298N motor controller
Motor 2WD Smart Robot Car Kit DIY features:
- Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Dimensions of the wheel: diameter 65mm - width 26 mm
Helpful Links:
Realization of a robot manageable by Infrared

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case for Raspberry Pi features:
- Case size: 95x65.5x34.5 mm
- Does not include Raspberry Pi

300cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 300cm
- Quantity: 1 unit

500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features:
- HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends
- High quality gold shielded connectors
- Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality
- Refresh rates up to 120Hz - Length: 500cm
- Quantity: 1 unit

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box for Raspberry Pi 4 model B features:
- clear acrylic case x 1 pcs. - mounting screw x 1 set Note: Raspberry Pi board, LCD screen is not included.

Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi.
It is perfectly mechanized to give access to all the ports of the Raspberry and it has a slot to take out a flat cable from the GPIO pins. It has a small fan of 5V and 0.19A to cool the processor of the Pi and solve one of the The main problems of this board, the excessive heating. Characteristic: - Fan voltage: 5 VDC
- Box size: 95x65.5x34.5 mm
- Fan size: 30x30x7 mm
- Includes mounting hardware for fan
- Does not include Raspberry Pi

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Acrylic box with fan for Raspberry Pi 4 model B features:
- clear acrylic case x 1 You. - 5Vdc fan - mounting screw x 1 set Note: The Raspberry Pi board is not included.

The complete 4 DOF robotic arm kit ideal for beginners and educational environments. The kit contains a small and simple 4-axis robot arm together with the components to start robotic projects. Includes arm, 4 servos, UNO board and joysticks for control.

Perfect kit to learn and teach robotics in an easy way, as you can build it with the instructions in the description in less than an hour and ready to control the arm with a development board and simple program! Compatible with Arduino. Fully programmable.