16mm CGL camera lens, CSI-2 interface, resolution 10 megapixels
  • 16mm CGL camera lens, CSI-2 interface, resolution 10 megapixels
  • 16mm CGL camera lens, CSI-2 interface, resolution 10 megapixels
  • 16mm CGL camera lens, CSI-2 interface, resolution 10 megapixels
  • 16mm CGL camera lens, CSI-2 interface, resolution 10 megapixels

16mm CGL camera lens, CSI-2 interface, resolution 10 megapixels

RA132

16mm fixed lens compatible with Raspberry Pi official HQ Camera (Reference RA094) C-mount, long distance telephoto type (up to 40m) 10 Mpx.

Raspberry Pi
8472496016537
Add to wish list

Description of Camera lens 16mm CGL, CSI-2 interface:

Fixed 16mm lens compatible with C-mount cameras, such as the official Raspberry Pi HQ Camera (Reference RA094) thanks to the included C-CS mount adapter.

Telephoto lens that captures sharp images at long distances (up to 40m), with a resolution of 10 MegaPixels.

It has manual focus and aperture adjustment.

Features of 16mm CGL Camera Lens, CSI-2 interface:

  • Lens format: 1"
  • Aperture: F1.4-16
  • Focal length: 16mm
  • Angle of view: 44.6º.
  • Mount type: C
  • IR filter: Yes
  • Zoom: Fixed
  • Focus: Manual
  • Distortion: 0.7% distortion
  • Dimensions: 39x50mm
  • Weight: 138gr

Links:

2021-04-23

Customers who bought this product also bought

Sonoff POW R2 - obsolete

POW provides yet another great functionality of measuring power consumption. Remote switch POW R2 works pretty much the same way as Basic just with added functionality of controlling and documenting power consumption. As with all the Sonoff products it works with eWeLink making it pretty much compatible with any larger smart home ecosystem.

WS004

Aluminum case for Raspberry Pi 4 model B

All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Case does not affect the Wifi signal. Aluminum case for Raspberry Pi 4 model B features:
- aluminum alloy case x 1 pcs. - mounting screw x 1 set - thermal pad x 1 set - screwdriver x 1 pcs. Note: Raspberry Pi board is not included.

RA070

Price €14.49

Sonoff sensor Si7021

The Sonoff SI7021 is a temperature and humidity sensor/jack sensor, for the intelligent TH16/TH10 switch and the S22 socket. It allows temperature measurement in the range of -40 to +85°C with a measurement resolution of 0.1°C

WS008

Price €6.89

150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car

A high-performance voltage regulator-riser 12V laptop power supply car accumulator
150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car features:
- Input voltage: 10V-32V
- Output voltage: 12-35V (adjustable)
- Output current: 6A maximum
- Input current: 10A maximum
- Output power: 100W of natural cooling (MAX), plus 150W (MAX) fan
- Conversion efficiency: up to 94% (2.5 A 16V Input Output 19V when measured - only as a reference)
- Wiring: seamless terminal
- Operating temperature: industrial grade (-40 „ƒ to 85 „ƒ) (room temperature exceeds 40 degrees, use of lower power, or add fan)
- Current without load: 25 mA typical

A0006

Price €4.99

XL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596

Descripción:
Chip XL4015 - Upgrade of the LM2596
Drop module
Use a multimeter to check the output voltage and adjust the potentiometer
Voltage control
XL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596 features:
- Input voltage: 4.5V-38V
- Output voltage: 1.25-36.5V
- Current output: 4.5A (max 5A)
- Output power: 75W maximum
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 180KHz
- Efficiency conversion: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Li-Po battery charger, Li-Ion

A0012

Price €4.95

40x Male to male cables 20cm

Characteristic: -Length: 20cm
-Quantity: 40 cables
-Mono Dupont connectors on both ends
-Compatible with 2.54mm female connectors
-High quality and good working condition
-Easy to install and use

K0006

Price €2.49

USBASP AVR ATmega8 ATmega128 Programmer Kanda Adapter Cable

With KANDA adapter it is ideal for projects with ARDUINO. Characteristic: - AVR 5V / 3.3V microcontrollers - programming voltage change through jumper JP1
- Status LED indicators
- Transmission speed: 5kB / s
- Protective fuse of possible damage to the USB port
- Supported OS: Win ME, Win XP, Vista, Win 7, Win8, Linux
- Works with Bascom, Eclipse, WINAVR, avrDUDE, ARDUINO IDE, ATMEL STUDIO The programmer is compatible with most AVR Atmel processors: - MEGA series 8,16,32,64,218 € ¦
- Tiny series: ATtiny10, ATtiny11, ATtiny12, ATtiny13, ATtiny13A, ATtiny € 15 ¦
- CAN series: AT90CAN32, AT90CAN64, AT90CAN128 € ¦
- AT90S2313 series, AT90S2323, AT90S144, AT90S1434 ¦

B0021

Price €5.19

Related articles on blog

No related article on blog

€61.49
Save €11.50 €49.99

41,31 tax excl.

Tax included 1
Last 5 items
Regular price €61.49 Price €49.99

Order until 4pm we will send today
30 days return