Battery LIPO 1520mAh 3.7V 2 cables

The module is equipped with an electret microphone with a sensitivity in the range of 20-20 kHz and the amplification is used in the Maxim MAX4466 integrated circuit, an operational amplifier specially designed for use as a microphone preamplifier.

This thread is designed to be used in Wearables projects because it provides a very firm grip on the fabric to be sewn.
What differentiates this thread from another thread is the fact that it is actually spun from this stainless steel fiber. This means that while it may not be easy to weld since it is steel, it also does not burn when you touch it with a soldering iron.
It is suitable for sewing machine (like a bobbin thread) it is particularly tense, which means that it firmly grasps the fabric and is not slippery. Lilypad Matching Conductive Sewing Thread Wearable features:
- Stainless steel fibers
- Resistance: 700 Ohm / m
- Thin and strong thread
- Includes 1 meter of wire

Support for ultrasounds, HC-SR04 distance meter.
Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features:
- Material: Acrylic
- Color: transparent
- Includes screws

The 6 DOF black aluminum arm is widely used in the field of teaching, the personal production of IDY and the education of the fanatics, it can be seen as a demonstration platform of multiple degrees of freedom, and its energy system consists of six servomotors, Robot can be achieved before and after, Up and down, left and right to grasp the handling of the presentation. Aluminium Robot 6 DOF Arm without servo features:
- Material: 2mm thick aluminum plate - Color: Black

Blue LED.
The color option allows you to adjust the LEDs to your liking to sew clothes or anything else you can dream of.
Lilypad is a wearable E-textile technology developed to have large connection pads to attach to clothing. Lilypad LED Blue features:
- Operating voltage: 3 - 5 VDC
- Very bright
- Density of the PCB: 0.8 mm
- LED color: blue
- Size: 5.5x12.5 mm
- 1 LED included

Version compatible with Arduino Nano V3.0
It has an ATMega328P chip running at 16Mhz with bootloader loaded factory.
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per I / O pin 40 mA
- Flash memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Frequency Clock: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

Robot arm set 4 DOF acrylic with screws and screwdriver for robotics projects.
100% compatible with Arduino.
Acrylic robot 4 DOF Arm without servo features:
- Type: DIY kit robot arm 4 DOF
- Degree: 4 degrees of freedom
- Material: acrylic
- For: 8 years and above
- Weight: ~ 450 g
- Does not include servos but it is imperative to have 4 micro servos sg90 to be able to mount it
More informations:
1. 4 arm axes with more untrammeled and flexible experience.
2. Most of the pieces are integrated in a perforated way at a time, which is very strong and easy to install.
3. All movement joints are using high quality bearings with good precision.

Pack 10pcs of micro servo 9g SG90.