Cooling

3x Heat Sink Aluminium Adhesive A4988 DRV8825 features:
- Package includes: 3x Heatsink with adhesive
- Ideal for DRV8825, A4988 etc
- Dimensions: 9 x 9 x 5mm

Thermal Conductive Pad TO220 18x13x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 18x13x0,3mm

Characteristic:
- Max Power: 24w
- Voltage: 12v
- Max Current: 2A
- Cooling capacity 17.7W
- Temperature variation:

Thermal Conductive Pad TO247 23x18x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass.
- Dimensions: 23x18x0,3mm

5x Power LED Aluminum Heat Sink 1W 3W features:
- Outside diameter: 36mm
- Height: 15mm
- Quantity: 5 units

Thermal Conductive Pad TO3 41.5x28.2x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 41.5x28.2x0.3mm

3x Power LED Aluminum Heat Sink 3W 5W features:
- Outside diameter: 36mm
- Height: 30mm
- Quantity: 3 units

TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features:
- The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator
- A double-sided adhesive product, reinforced with fiberglass
- Dimensions: 26x26x0,3mm

Fan 12V 2x Cables PC CPU case features:
- Voltage: 12V
- Consumption: 0.28A
- Screw diameter: 3.5mm
- Life time useful: 30,000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 24.5cm
- Dimensions: 80mm x 80mm x 15mm

Characteristic: - Voltage: 12V
- Consumption: 120mA
- Speed: 4800rpm -5600rpm
- Noise level: 25dB ± 10%
- Screw diameter: 4.5mm
- Life time: 40000 hours
- Operating temperature: -10 ° C to 65 ° C
- Length Cable: 28cm
- Dimensions: 40mm x 40mm x 20mm
- For cooling MK8 hotels

Fan 12V 2x 3D Printer Cables features:
- Voltage: 12V
- Consumption: 65mA
- Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10%
- Screw diameter: 4.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 11cm
- Dimensions: 40mm x 40mm x 10mm

Mini Fan 12V 2x 3D Printer Cables features:
- Voltage: 12V
- Consumption: 80mA
- Speed: 2600rpm +/- 10%
- Temperature operating: -10 ° C to 65 ° C
- Cable length: 12cm
- Dimensions: 25mmx 25mm x 10mm

Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features:
- Mounting kit
- Ceramic Peltier Cell 12V TEC1-12706
- Heatsink 12x10x25mm (hot side)
- Heatsink 60x40x25mm
- Color black or silver
- Thermal insulation 70x65mm for cell
- Fan 12V 90x90x25mm with grille
- Thermal paste 0.5g
- Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC
- Max Power: 60w
- Voltage: 12v
- Max Voltage: 15.2v
- Max Current: 6A
- Temperature Variation:

3x LED Base Plate Heat Sink 1W 3W 5W features:
- Outside diameter: 20mm
- Quantity: 3 units

Thermo Silicone Paste Cleaner features:
This product is safe and easy to use with a pleasant aroma of citrus.
It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned
- Wait 1-2 minutes
- Clean with a cloth

Kit 3x Aluminium Dissipative Adhesive features:
- For Raspberry Pi 2 and Pi 3, B and B +
- Heatsink includes thermal sticker
- 1x aluminum heatsink for the microprocessor
- Dimension: 14x14x5mm
- 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator
- Dimension 9x9x4mm
- Quantity: 3 units

For Raspberry Pi 2 and Pi 3, B and B +.
The heatsink includes a thermal sticker. Characteristic: - Dimensions: 13x12x5mm
- Quantity: 1 unit

Fan 12V 2x Cable 50x50x15 3D Printer Reprap features:
- Voltage: 12V
- Speed: 7000rpm ± 10%
- Screw diameter: 4.5mm
- Time lifespan: 50,000 hours
- Operating temperature: -10 ° C to 70 ° C
- Cable length: 28cm
- Dimensions: 50mm x 50mm x 10mm

Aluminum Heatsink with Adhesive LM2596 XL4015 features:
- Ideal for LM2596, XL4015, etc...
- Dimensions: 11x11x5.5mm

Characteristic: - Heatsink 12x10x25mm (hot side)
- Heatsink 60x40x25mm (black or silver color)
- 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm
- Thermal paste 0.5g
- Screws
- Kit does not include: Peltier cell Ceramic TEC1-12706 12V

Characteristic:

- Voltage: 12V
- Consumption: 0.3A
- Screw diameter: 4mm - Product duration in operation: 30000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 14.5cm
- Dimensions: 92mm x 92mm x 25mm

Peltier Ceramic Cell TEC1 12706 12V 60W features:
- Max Power: 60w
- Voltage: 12v
- Max Voltage: 15,2v
- Max Current: 6A
- Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC

Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.
It is necessary for the correct operation of any type of temperature sensors.

Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K

Fan 12V 2x Cables 3D Reprap Printer features:
- For Prusa RepRap 3D Printer
- Voltage: 12V
- Consumption: 90mA - Speed: 7000rpm ± 10%
- Noise level: 25dB ± 10%
- Screw diameter: 3.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 28cm
- Dimensions: 30mm x 30mm x 10mm

The aluminium heatsink for 3W to 5W LEDs. It is 10cm long, 2.5cm wide, 1.0cm high.

Aluminum Heat Sink 15cm 2cm LED 1W 3W features:
Aluminum heatsink for LED 1W-3W, Length: 15cm, Width: 2.0cm, Height: 0.6cm.

The perfect heatsink with aluminium adhesive for NanoPi Neo Plus module with screws

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes thermal sticker. Characteristic: 1 cover sink:
- Dimensions: 13x12x5mm
1 blue aluminum sink:
- Dimensions: 9x9x12mm

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features:

1 blue aluminum heatsink:
- Dimensions: 9x9x12mm 1 flat metal sink gold color:
- Dimensions: 12x12x1mm

For Raspberry Pi 2 and Pi 3, B and B +.
Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features:

1 blue aluminum heatsink:
- Dimensions: 9x9x12mm
1 flat gold metal sink:
- Dimensions: 12x12x1mm
1 green aluminum sink:
- Dimensions: 19x19x8mm

Heat sink for transistors with TO-220 / TIP120 box
Transistor heat sink with TO-220/TIP120 box features:

Aluminum heatsink:
- Dimensions: 25x15x10mm

High power 50W LED suitable for KTV light, projection lamps.
Ideal for DIY projects.
DC 12V CPU heatsink for high power 50W LED diodes features:
- 35mm thick heat sink,
- DC 12V Ø95 x 25mm fan,
- 4 screws to fix the base carrying the LED diodes,
- Step between screws: 71.5mm,
- Includes thermal grease.

Fan 5V 2x Cable 50x50x15mm features:
- Voltage: 5V
- Speed: 7000rpm ± 10%
- Screw diameter: 4.5mm
- Time lifespan: 50,000 hours
- Operating temperature: -10 ° C to 70 ° C
- Cable length: 28cm
- Dimensions: 50mm x 50mm x 15mm

Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:
It facilitates the transfer of heat between the electronic components and the radiator.
It's necessary for the correct operation of any type of temperature sensors.
Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.
-Density at 20°C: 2.58 G/cm3
-Points: 350°C
-Freezing point: -50°C
-Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K
-Constant dielectric at 100 Hz: 4.7 (± 0.1)
-Cross resistance: 5x10 to power 14 Ohm x cm

Copper-based thermal paste designed to improve processor cooling Thermal Paste Syringe 3.1W / mK CPU features:
- The thermal conductivity of ~ 3.1 W/mK
- Not suitable for aluminum radiators
- No driver
- 1,5ml content

Thermal Pad Silicone Heat Pad CPU GPU features:
- The transfer of heat between the electronic components and the radiator is facilitated.
- Thermal conductivity 1,5W / mK
- Thickness 1mm quantity: 1 unit
- High quality - manufactured in EU
- Thermopad 100x20x1mm
- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling

Thermal Pad Silicone Heat GPU CPU 130x20x1mm. The tapes are thermally used as an application of a thermal paste.

The silicone paste provides insulation and protection against the weather. N Silicone Insulating Paste 3.5g features:
- The breaking voltage is ~ 30kV / mm.
- Preserves rubber, plastic
- A wide range of operating temperatures: -50 ° C to 200 ° C
- Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU

The silicone paste provides insulation and protection against the weather. Prevents from breakdowns. The breaking voltage is ~ 30kV / mm.
Preserves rubber, plastic. A wide range of operating temperatures: -50 ° C to 200 ° C. Very good resistance to chemical oxidation, aqueous solutions of acids, bases and sales, sulfur dioxide and ammonia. High quality - manufactured in EU            

Totally new and of high quality.
Dissipate the heat of the computer by refrigerating it effectively.
It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.
Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features:
  - Color white
- Surface drying time [25 ° C, min]: 2- 8
- Hardness: 45 -75
- Tensile strenght (Mpa): 2.0
- Elongation (%): 100
- Thermal Conductivity W / mk:> 1,0
- Volume Resistance (c-in / W): <2.0 x 10 * 15
- Dielectric strength (KV / mm): 20
- Dielectric Constant: 3.0
- Dielectric loss factor (60Hz): 0.003
- Operating temperature (max): 200 ° C

Silicone Thermal Paste Syringe 25g features:
- Density at 20°C: 2.58 G/cm3
- Flashpoints: 350°C
- Freezing point: -50°C
- Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
- Co-efficient global heat transfer at 0-150°C: 0.78 W/m K
- Constant dielectric at 100 Hz: 4.7 (± 0.1)
- Cross resistance: 5 x 10 to the power 14 Ohm x cm
- Loss rate at f = 100 Hz: 0.020 (± 0.003)
- Range of operating temperature: -50~200°C

The transfer of heat between the electronic components and the radiator is facilitated.
It is necessary for the correct operation of any type of temperature sensors.
It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. Thermo Conductive Grease Paste 340°C 3D Prusa 100g features:
- It has a very wide range of working temperatures: -30 °C ~ 300 °C
- Maximum momentary working temperature 340 °C
- Thermal conductivity> 1.5 W / mK

The package includes 10 pcs. of Peltier cell insulating washer, 1 pc. of silicone paste 7 grams.

Neoprene insulating washer is used to separate the area around the Peltier module from the surrounding atmosphere. The cooling effect is unbeatable. Suitable for cell size 40mm x 40mm x 3,8mm. 

It is an economy 40W ventilator with a range of features from anti heating protection to 3 speeds of circulation. It is a perfect and cheap option for hot summer months!

It is an economy 50W ventilator with a range of features from anti heating protection to 3 speeds of circulation. It is a perfect and cheap option for hot summer months!

It is an economy 50W ventilator with a range of features from anti heating protection to 3 speeds of circulation. It is a perfect and cheap option for hot summer months!

It is an economical black 2W laptop fan with a range of features from USB power to 3 speed drive. It is a perfect and inexpensive option for the hot summer months. It is very quiet.

It is an economical black 4W pocket fan with a range of features from USB power to 3 speed drive. It is a perfect and inexpensive option for the hot summer months. It is very quiet.

It is an economical black 5W pocket fan with a range of features from USB power to 3 speed drive. It is a perfect and inexpensive option for the hot summer months. It is very quiet.

Kit includes thermal insulation for peltier cell, thermal paste and TEC1-12706 12V ceramic peltier cell. 

Heat Sink Aluminium Nema 17 features:
- MK8 Extruder Radiator Heatsink Printer
- Ideal for NEMA17 motors and MK7 and MK8 extruders - Dimensions 40 x 40x 11mm

Heatsink aluminium adhesive radiator for electronics components. Especially recomanded for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips etc.

Good thermal conductivity, reduce the risk of hardware failure due to overheating, made of high quality Aluminum.

Heatsink aluminium adhesive radiator for electronics components. Especially recomanded for passive cooling of Stepper Drive, MOSFET, VRM, Vram, IC Chips etc.

Good thermal conductivity, reduce the risk of hardware failure due to overheating, made of high quality Aluminum.

Fan 12V 2x Cables PC CPU case features:
- Voltage: 12V
- Consumption: 0.28A
- Screw diameter: 3.5mm
- Life time useful: 30,000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 24.5cm
- Dimensions: 80mm x 80mm x 25mm

This air purifier uses a HEPA filter to safely remove viruses, bacteria, mold, mildew, dander, etc. Filters up to 99.5% of dust, pollen, tobacco smoke, mould spores and pet dander. Keeps the environment clean.

This air purifier uses a HEPA filter to remove viruses, bacteria, mould, dander, etc. safely. The dehumidifier regulates humidity in the bathroom, kitchen, etc. Filters up to 99.5% of dust, pollen, tobacco smoke, mould spores and pet dander. Keeps the environment clean.

Kit includes heatsinks, thermal insulation for peltier cell, fan with grille, thermal paste, screws and TEC1-12706 12V ceramic peltier cell. 

Thermally Conductive Silicone Paste facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. It is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia.