W1209 12V DC Thermostat Digital Temperature Controller Switch W1209 12V DC Thermostat Digital Temperature Controller Switch features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50 -110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measurement accuracy: 0.1 ° C - Refresh rate: 0.5 s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Power of output: 10A relay - Sensor probe: NTC waterproof sensor (10K 0.5%) - Environmental requirements: -10 ~ 60 ° C Humidity 20% -85% - Dimensions: 48 x 40 mm Code M0102 Available Price €3.79
LED Power Supply Transformer DC 12V 5A 60W LED Power Supply Transformer DC 12V 5A 60W features:- Supply voltage: 110/230V AC- Output voltage: 12V DC- Output amperage: 5A- Power at 12V: 60W- Dimensions: 110mm x 78mm x 36mm Code A0053 ✗ Out-of-Stock Price €10.95
Voltmeter Ammeter 100V 50A Digital DC Red Blue Voltmeter Ammeter 100V 50A Digital DC Red Blue features: - Supply voltage: 4.5V to 30V - Voltage measurement range: 0V to 100V (± 1%) - Min voltage resolution: 0.1V - Current measurement range: 0A to 50A (± 1%) - Min current resolution: 0.1A - Operating current: 5mA to 15mA - Display: Red LED color (Voltage) and Blue LED color (Intensity) - Includes reverse polarity protection - Measurement refresh time: 500ms - Screen dimensions: 48 x 29 mm - Recessed hole: 45.5 x 26.5 mm - Depth: 21 mm - Cable length: 150 mm - Operating temperature: - 10ºC to 65ºC - No battery needed - Dual panel with voltmeter and digital ammeter Useful links for Arduino /> Code M0073 Available Price €6.89
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.59
Kapton type 5mm thermal tape Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acid and alkaline products - Resistant to solvent - Adhesive - Approx Length: 26m - Polyamide adhesive tape 5mm x 26m - Known as Kapton polyamide tape - Product for welding works on those that need to protect some component from heat Code I0062 Available Price €1.59
Electric tin soldering iron with adjustable temperature and LCD - 908S 80W The 908S 80W soldering iron has a power of 80W equipped with the 900M-B1.2 tip, LCD display to show the temperature setting (180 ~ 500 ℃). Fast heating. The tip is replaceable. The soldering iron is CE, RoHS certified. The kit includes 5 replacement tips and a welding holder. Code H0242 Available Regular price €16.99 -€3.50 Price €13.49
Kapton type 10mm thermal tape Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acid and alkaline products - Resistant to solvent - Adhesive - Length Approx: 33m - Polyamide adhesive tape 10mm - Known as Kapton polyamide tape - Product for welding works on those that need to protect some component from the heat Code I0061 Available Price €2.15
Raspberry Pi v2 Oficial Camera - Sony IMX219 8 Megapixel Sensor HD V2 Raspberry Pi camera board The Raspberry Pi High Definition (HD) camera board connects to any Raspberry Pi or Compute Module to create HD photos and video. Uses Sony's IMX219PQ image sensor that offers high-speed, high-speed video images Sensitivity. Raspberry Pi Camera Module offers reduced image contamination such as fixed pattern noise and smudges. It also has automatic control functions such as exposure control, white balance and luminance detection. Raspberry Pi Camera Board, Sony IMX219 8 Megapixel Sensor features: High-quality images High data capacity Fixed 8 megapixel focus (includes focus adjustment tool) Compatible with 1080p, 720p60 and VGA90 Sony IMX219PQ CMOS image sensor 15-pin ribbon cable Code RA053 Last items in stock Price €29.89
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Peltier Ceramic Cell TEC1 12706 12V 60W Peltier Ceramic Cell TEC1 12706 12V 60W features: - Max Power: 60w - Voltage: 12v - Max Voltage: 15,2v - Max Current: 6A - Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC Code M0055 Available Price €3.95
Peltier Thermoelectric Kit with Cooling Fan 12V 72W Kit includes heatsinks, thermal insulation for peltier cell, fan with grille, thermal paste, screws and TEC1-12706 12V ceramic peltier cell. Code M0227 Last items in stock Price €31.95
Célula 12V + Pasta térmica + Aislante Peltier TEC1-12706 M0057 Kit includes thermal insulation for peltier cell, thermal paste and TEC1-12706 12V ceramic peltier cell. Code M0057 Available Price €5.13
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Peltier Ceramic Cell TEC1 12706 12V 60W Peltier Ceramic Cell TEC1 12706 12V 60W features: - Max Power: 60w - Voltage: 12v - Max Voltage: 15,2v - Max Current: 6A - Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC Code M0055 Available Price €3.95
Peltier Thermoelectric Kit with Cooling Fan 12V 72W Kit includes heatsinks, thermal insulation for peltier cell, fan with grille, thermal paste, screws and TEC1-12706 12V ceramic peltier cell. Code M0227 Last items in stock Price €31.95
Célula 12V + Pasta térmica + Aislante Peltier TEC1-12706 M0057 Kit includes thermal insulation for peltier cell, thermal paste and TEC1-12706 12V ceramic peltier cell. Code M0057 Available Price €5.13