DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706

It can be used to work with AVR, ARM, PIC microcontrollers, Arduino modules and to work with self-designed prototypes. Arduino Protoboard Breadboard 400 points features:
-400 Connections
-Linkable with other Plates
-Base with adhesive to attach it to the work surface
-Measures 82x55x8 mm

Characteristic:

- Voltage: 12V
- Consumption: 0.3A
- Screw diameter: 4mm - Product duration in operation: 30000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 14.5cm
- Dimensions: 92mm x 92mm x 25mm

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of tension.
LM2596 DC Voltmeter Converter 3A Step Down Adjustable Power features:
- Input voltage: 4.5-38V
- Output voltage: 1.25-36.5V
- Current output: 2A (max 3A with heat sink)
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 150KHz
- Efficiency conversion: up to 92%
- Load Regulation: +/- 0.5%
- Voltage Regulation: +/- 2.5%
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Voltmeter up to 40V, remember to set the input voltage to 4.5V

Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:
It facilitates the transfer of heat between the electronic components and the radiator.
It's necessary for the correct operation of any type of temperature sensors.
Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.
-Density at 20°C: 2.58 G/cm3
-Points: 350°C
-Freezing point: -50°C
-Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K
-Constant dielectric at 100 Hz: 4.7 (± 0.1)
-Cross resistance: 5x10 to power 14 Ohm x cm

Fan 12V 2x 3D Printer Cables features:
- Voltage: 12V
- Consumption: 65mA
- Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10%
- Screw diameter: 4.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 11cm
- Dimensions: 40mm x 40mm x 10mm

12864 LCD Display Full Graphic Intelligent Controller can be connected directly to your RAMPS 1.4. All new operations, such as calibration, axis movement can be done only with the smart rotary encoder. You don't need to use your PC. Just use the design in G-Code stored on the SD card.

2x Cable Alligator Clip Black and Red Multimeter features:
- Length: 90cm
- Colors: red and black
- Quantity: 2 Cables

Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features:
- This extruder is ready to mount and print
- PC4-M6 bowden pneumatic connector
- 12V 2-wire 40x40mm fan
- Metal fan cover
- MK8 heat sink
- MK8 aluminum extruder
- PAP Nema17 3.25V 1.3A motor with cable
- Capable of loading with 4.48 kg / cm