H0048
M3 Hexagonal Spacer 25mm Male - Female Brass
Characteristic:
-Metric thread M3
-Male-Female separator 25mm
-Quantity: 5 units
Printed circuits
In the category printed circuit boards we offer you prototyping boards, breadboards, copper plates, sockets and standoffs. Do you have to connect two elements quickly to verify an idea? This category is perfect for that. Check the technical parameters of our boards to make sure you select the most appropriate products for your search.
Subcategories
-
Perforated
Perforated circuit board (perfboard) - is a basic board that enables experiments with different electronic elements, creation of new circuits and projects. Solder the selected elements and connect them by wires as you wish. When buying a perfboard, consider its dimensions and material, as these are the characteristics that determine both the function of the board and its quality.
-
Protoboard
Contact board, breadboard, breadboard, test board or breadboard - all these names describe the same board. The breadboard ensures efficient and fast connection of electronic components without the need for soldering. These prototype boards allow the precise and accelerated creation of individual blocks within the electronic circuit. This allows the contact board to perform systems, tests or measurements after installation of the relevant components - from resistors to diodes to capacitors. The transparency of the individual connections thus achieved is a key advantage guaranteed by the test boards. Solectroshop offers you contact boards in all versions. These include not only basic prototype components, but also kits with power supplies and wiring. The variety of prototype contact plates makes you find the perfect product tailored to your individual requirements in our assortment of all sizes.
-
Virgins
Blanks are the copper plates that form the base for a printed circuit board. Adjust the board dimensions you need for the specific purpose of your project. If you have specific questions about the use of copper plates, please consult our content or technical pages. The ideal copper plate with glass fibre or bakelite to make a homemade printed circuit board (PCB).
-
Spacers
Standoffs and guides are used for fixing, locking and separating boards and components used on the PCB. It is essential to know the material of standoffs, such as Nylon screws, and to learn whether it will conform to the requirements of our project. Check a wide offer of standoffs, guides and other PCB board components from Solectroshop.
-
Sockets
Sockets make it possible to attach integrated circuit elements to printed circuit boards without soldering. It is a perfect solution if you want to make sure that you won't damage an element due to high temperature and you can easily replace it anyway. The most popular components for socket use are memory and microcontrollers. Check out our offer below!
-
Circuit Recording
Etch is a chemical substance necessary for home-made printed circuit boards. The etchant is diluted in a plastic bucket with water and is used to attack the copper on the board. It is important to wear gloves during the process. Check our offer below!
H0049
M3 Nylon Separator set 120pcs
120x M3 Nylon Separator features:
- Hexagonal M3 made of nylon for screws and fastenings on PCB boards, model aircraft, DIY projects
- Can be used in prototyping and robotics projects
- Box dimension: 128x 66x 24mm
- Quantity: 120 units
- Color: white
H0021
Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB
Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB features:
Industrial abrasive scourer for laminated copper plate Cleaner for cleaning the laminated copper plate. Perfectly removes impurities such as oxides, sulfides and other similar establishments, as well as polished surfaces so that the copper substrate is better prepared.
It is also ideal for removing the remains of enamels, lacquers and other materials used during the creation of PCB tracks.
Q0094
Universal developer for photo varnish and positive printed circuit boards PCB
The product provides a good development quality, protecting the sharpness of the color.
The formulation is free of NaOH, which significantly increases safety at work.
Universal developer for photo varnish and positive printed circuit boards PCB features:
- Manufacturer: TermoPasty,
- Na‚‚O content: ‰¥29%,
- SiO‚‚ content: ‰¥28%,
- Substances not dissolved in H‚‚O: 0%,
- Whiteness: 97%,
- Iron: 45 ppm,
- Apparent density: 0.98g / cm³.
Mode of use:
- Store in airtight containers in dry, well-ventilated areas away from sources of heat and ignition.
- Do not store together with flammable substances.
Applications:
- Developer of photos,
- developer for PCB electronic boards.
Content:
The formulation is free of NaOH, which significantly increases safety at work.
Universal developer for photo varnish and positive printed circuit boards PCB features:
- Manufacturer: TermoPasty,
- Na‚‚O content: ‰¥29%,
- SiO‚‚ content: ‰¥28%,
- Substances not dissolved in H‚‚O: 0%,
- Whiteness: 97%,
- Iron: 45 ppm,
- Apparent density: 0.98g / cm³.
Mode of use:
- Store in airtight containers in dry, well-ventilated areas away from sources of heat and ignition.
- Do not store together with flammable substances.
Applications:
- Developer of photos,
- developer for PCB electronic boards.
Content:
PB021
Protoboard Breadboard 5x7cm
Protoboard Breadboard 5x7cm features:
-PCB dimension: 5x7cm
-Hole diameter: 1mm
-Pitch: 2.54mm
-Bakelite with copper fields
PB016
Protoboard Breadboard 9x15cm
Protoboard Breadboard 9x15cm features:
-PCB dimension: 9x15cm
-Hole diameter: 1mm
-Pitch: 2.54mm
-Bakelite with copper fields
H0101
25x M4x5 Nylon Round Separator Polyamide Insulators PCB
M4 made of nylon for screws and fasteners on PCB boards, model airplanes, DIY projects.
You can use in prototyping and robotics projects.
25x M4x5 Nylon Round Separator Polyamide Insulators PCB features:
- Material PA66
- Type: female / female
- Inner diameter M4
- Body length: 5mm
- Quantity: 25 units
- Color: white
Q0053
Sodium Persulfate PCB Etchant pack 100g
Sodium Persulfate PCB Etchant features:
Chemical substance for recording printed circuits and copper. Unlike ferric chloride, sodium persulfate is colorless, odorless, does not stain clothes and does not turn blue when it runs out.
Easy to dissolve. It acts very regular with guarantee of contour sharpness. Mode of use: - Dilute in a plastic bucket, the contents of the envelope of 100 in 0.5 liters of water heated to 40-50ºC, or the ratio for a smaller PCB
- Do not store the solution in closed bottles
- It is corrosive, wear latex gloves
- Necessary for the homemade manufacture of printed circuits
- Care should be taken during digestion, as it is aggressive - especially for the eyes, skin and respiratory tract.
- Made in the European Union
PB019
Double Side Prototype PCB Board 5x7cm
Double Side Prototype PCB Board 5x7cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm
PB018
2x Double Side Prototype Board PCB 8x12cm
2x Double Side Prototype Board PCB 8x12cm features:
-Thickness of PCB: 1.6mm
-Material: high quality FR-4 glass fiber PCB
-Presented and numbered on both sides
-Top and bottom are identical copper layers
-Pads grid (pitch) 2.54mm/0.1", hole diameter 0.9mm