DHT22/AM2302 Temperature Humidity Sensor The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. This sensor, unlike DHT11, is capable of measuring negative temperature values and measures tenths of a degree. DHT22/AM2302 Temperature Humidity Sensor features: - Voltage Operating: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy - Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy - Maximum sampling rate: 2 seconds Code S0018 Available Price €3.26
Ceramic Capacitor 220nF 50V 224 20x Ceramic Capacitor 220nF (0,1uF) 50V 224 features:-Type: ceramic Z5U-Tolerance: +80 -20%-Dimensions: diameter 9.5mm, pitch 5.08mm Orders only in multiples of 20 units Code D0058 Available Price €0.05
4-Channel 5V 10A Relay Module Characteristic: - Channels: 4 (independent protected by Optocouplers) - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - Isolation: Yes - Indicator LED: For each channel - Dimensions: 54x 72mm - 5V Optocoupled 4-Channel Relay Module - This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: User manual for the remote control + 4-channel 315 MHz IC2262 receiver: - Relay Module Programming 5V 10A 4 Channel with remote control + 4 channel receiver Code RL007 Available Price €3.30
2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino 2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL004 Available Regular price €2.60 -€0.50 Price €2.10
20x Electrolytic Capacitor 22uF 50V 105ºC PCB for Arduino 20x Electrolytic Capacitor 22uF 50V 105ºC Arduino PCB features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 22uF-Maximum tension: 50V-Maximum temperature 105º C-Dimensions: 5x11mm-Quantity: 20 units Code D0042 Available Price €0.06
Fotoboard Pre-Sensitized Photoresist Coated PCB Copper Laminate - One-Sided 15x25cm Fotoboard Pre-Sensitized Photoresist Coated PCB Copper Laminate - One-Sided 15x25cm features:- One side plate for prototype 150x250mm 35um- Fiberglass Code H0165 Available Regular price €7.43 -€1.00 Price €6.43
Laminated Copper Clad Prototype PCB Circuit Board kit pack 10 pcs. A set of boards of different sizes, single or double-sided, ideal for testing or manufacturing printed circuit boards. The set contains about 10 boards of different sizes (e.g. 8x12 cm, 8x20 cm, 10x15 cm, 12x20 cm and others) and a total weight of about 0.5 kg. Code PB051 Available Price €5.78
50x Ceramic Capacitor 47nF 50v 103 PCB PIC for Arduino 50x Ceramic Capacitor 47nF 50v 103 PCB PIC Arduino features:-Type: ceramic Y5V-Tolerance: +/-20%-Dimensions: diameter 6mm, pitch 5.08mm Orders only in multiples of 50 units Code D0056 Available Price €0.02
Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg features: A compound for etching of printed circuit boards and pickling of copper. An ideal alternative to ferric chloride. It is readily soluble and does not crystallize from the solution. It etches evenly, ensures the sharpness of contours and minimizes undercutting. Usage: Dissolve the preparation in 0.5 l of water at a temperature of 50°C. Perform etching at 40°C (max. 50°C). Bath movement ensures quicker etching. The etching solution must not be stored in hermetically sealed containers due to the risk of developing overpressure and cracks. Code Q0027 ✗ Out-of-Stock Price €10.32
Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm features:- Code H0168 Last items in stock Price €4.95
Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm features:- Code H0169 Last items in stock Price €5.94
PCB Circuit Board Marker Pen 0.4mm for printed circuits PCB Circuit Board Marker Pen 0.4mm for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.4mm- 1 unit Code V0004 Available Price €2.31
PCB Circuit Board Marker Pen 1.0mm for printed circuits PCB Circuit Board Marker Pen 1.0mm for printed circuits features: -Permanent resistance ink to acid attack-Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Does not leave stains of ink, resistant to sunlight-Quantity: 1.00mm - 1 unit Code V0003 Available Price €2.31
PCB Circuit Board Marker Pen 0.6 for printed circuits PCB Circuit Board Marker Pen 0.6 for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.6mm -1 unit Code V0005 Available Price €2.31
Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB features: Industrial abrasive scourer for laminated copper plate Cleaner for cleaning the laminated copper plate. Perfectly removes impurities such as oxides, sulfides and other similar establishments, as well as polished surfaces so that the copper substrate is better prepared.It is also ideal for removing the remains of enamels, lacquers and other materials used during the creation of PCB tracks. Code H0021 Available Price €0.82
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB. Code Q0094 Available Price €2.39
PCB Circuit Broad Marker Pen for printed circuits - 3pcs pack 3x PCB Circuit Broad Marker Pen for printed circuits features: -Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Resistant to sunlight-Permanent resistance ink to acid attack-Quantity: 3 unitsS 0.4mm - 1 unitM 0.6mm- 1 unitL 1.0mm - 1 unit Code V0006 Available Price €6.27
Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg Sodium Persulfate B327 (PCB) Printed Circuit Board Etching 1kg features: A compound for etching of printed circuit boards and pickling of copper. An ideal alternative to ferric chloride. It is readily soluble and does not crystallize from the solution. It etches evenly, ensures the sharpness of contours and minimizes undercutting. Usage: Dissolve the preparation in 0.5 l of water at a temperature of 50°C. Perform etching at 40°C (max. 50°C). Bath movement ensures quicker etching. The etching solution must not be stored in hermetically sealed containers due to the risk of developing overpressure and cracks. Code Q0027 ✗ Out-of-Stock Price €10.32
Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm Developer tray for Fotoboard Pre-Sensitized PCB 14x22cm features:- Code H0168 Last items in stock Price €4.95
Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm Developer tray for Fotoboard Pre-Sensitized PCB 22x31cm features:- Code H0169 Last items in stock Price €5.94
PCB Circuit Board Marker Pen 0.4mm for printed circuits PCB Circuit Board Marker Pen 0.4mm for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.4mm- 1 unit Code V0004 Available Price €2.31
PCB Circuit Board Marker Pen 1.0mm for printed circuits PCB Circuit Board Marker Pen 1.0mm for printed circuits features: -Permanent resistance ink to acid attack-Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Does not leave stains of ink, resistant to sunlight-Quantity: 1.00mm - 1 unit Code V0003 Available Price €2.31
PCB Circuit Board Marker Pen 0.6 for printed circuits PCB Circuit Board Marker Pen 0.6 for printed circuits features: - Permanent resistance ink to acid attack- Resistant to sunlight- Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.- Quantity: 0.6mm -1 unit Code V0005 Available Price €2.31
Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB Industrial Abrasive Scourer Pad 150x50mm Laminated Copper Plate PCB features: Industrial abrasive scourer for laminated copper plate Cleaner for cleaning the laminated copper plate. Perfectly removes impurities such as oxides, sulfides and other similar establishments, as well as polished surfaces so that the copper substrate is better prepared.It is also ideal for removing the remains of enamels, lacquers and other materials used during the creation of PCB tracks. Code H0021 Available Price €0.82
Universal developer for photo varnish and positive printed circuit boards PCB The product provides a good development quality, protecting the sharpness of the color. The formulation is free of NaOH, which significantly increases safety at work. Universal developer for photo varnish and positive printed circuit boards PCB. Code Q0094 Available Price €2.39
PCB Circuit Broad Marker Pen for printed circuits - 3pcs pack 3x PCB Circuit Broad Marker Pen for printed circuits features: -Ideal to write on almost any flat surface, such as PCBs, glass, plastic, metal, etc.-Resistant to sunlight-Permanent resistance ink to acid attack-Quantity: 3 unitsS 0.4mm - 1 unitM 0.6mm- 1 unitL 1.0mm - 1 unit Code V0006 Available Price €6.27