List of products by brand Termopasty

Totally new and of high quality.
Dissipate the heat of the computer by refrigerating it effectively.
It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.
Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features:
  - Color white
- Surface drying time [25 ° C, min]: 2- 8
- Hardness: 45 -75
- Tensile strenght (Mpa): 2.0
- Elongation (%): 100
- Thermal Conductivity W / mk:> 1,0
- Volume Resistance (c-in / W): <2.0 x 10 * 15
- Dielectric strength (KV / mm): 20
- Dielectric Constant: 3.0
- Dielectric loss factor (60Hz): 0.003
- Operating temperature (max): 200 ° C

The reliable Super Glue, is ideal for repairing ceramics, plastics, leather and model making work. It permanently and strongly adheres a variety of materials such as metal, wood, paper, rubber, glass, porcelain, ceramics, plastic and plastic. The colourless adhesive cures at room temperature, taking effect in just a few seconds. Indispensable for the home or small workshop.

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. The application method guarantees simplicity of use, and the product can be easily applied to various computer accessories and LEDs. Ideal as a heat transmitter from the heat pipe condenser to the heat exchanger in a vacuum solar collector. Thermal conductivity: 6 W / mK.

The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.
The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK.

Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.
A special brush facilitates the application of the paste.
Diamond powder content: 10%
AG Extreme thermal grease 4g flask features:
- Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,
- Thermal impedance: <0.065 ° C in2 / W
- Specific gravity:> 2.4g / cm3,
- Evaporation: <0.001%,
- Fluency: <0.001%,
- Electrical conductivity: insulation,
- Viscosity: 1000 cP,
- Working temperature from -40ºC to + 300ºC,
- Supported temperatures: -40ºC to + 350ºC,
- Gray.
Mode of use:
- Store in a well ventilated, cool and dry place.

AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.
This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.
Thermal conductivity:> 2.8 W / mK,

AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. This product complies with ROHS hazardous substances directive. Thermal conductivity:> 3.8 W / mK,

AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK.

Type of chemical preparation: alcoholic stripper of printed PCB plates.
Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.
has low impact on electronic components.
Alcohol PCB Cleaner 1l features:
- Form: liquid
- Capacity: 1l
- Alcohol PCB cleaner
PCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.
The liquid does not affect the substrate or components of the circuit board.

Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity. It is designed to seal threaded connections in high pressure conditions and at elevated temperatures. Provides easy assembly and disassembly of connections. Prevents the seizure of threaded connections.

Ceramic Grease Spray, non-stick antifriction. The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C.
Application: Installation of boilers, furnaces, motors, heating systems, water pumps.

Ceramic Grease Spray Non-stick Antifriction 100ml features:
The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C. Prevents the €˜seizure€™ of metals. Anti-corrosion and anti-seizure properties - excellent protection. Facilitates dismounting of the pre-lubricated parts. It does not contain metal compounds or silicone. It is resistant to chemicals, water and weather conditions. Application:  - Installation of boilers, furnaces, motors, heating systems, water pumps
- Exhausts, manifold mounting screws, heads, hubs
- Breaking systems, ABS, ASR and ESP systems

Liquid for cleaning LED boards.
The fluid quickly and effectively cleans even the most persistent dirt on the surface of the boards.
Eliminates traces of marker, scratches and discoloration resulting from long term use of the board.
Cleaning liquid for LED boards 250ml features:
- Manufacturer: AG Chemia,
Content:
- A 250ml aerosol.

Cleaning of AG Printer Spray 400ml features:
- An agent for cleaning printing mechanisms in printers (mechanisms feeding paper, printing head drive components etc.), cleans print heads in needle printers, it does not react with plastics used in printers

Compressed Air 300ml Spray Cleaner features:
- Cleaning computers, keyboards, electronics, printers
- All types of office material
- Made in the EU - HIGH QUALITY
- When using the cleaner, remember to turn off your electronic devices and wait until the gas has evaporated before turning on the devices

A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - manufactured in EU

A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - Made in EU
- No to the most usual materials of electrical systems

A bottle of 500ml ethyl alcohol in Liquid, contains 70% ethanol.

Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use.

A bottle of 5000ml ethyl alcohol in Liquid, contains 70% ethanol.

Bactericidal and virucidal liquid disinfectant for surfaces. Product ready to use.

Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. 

Epoxy resin is an encapsulating, two-component mixture. Cures at room temperature. Excellent electrical insulation and good adhesion to virtually all materials. Ideal for potting or filling gaps in heat-generating electronic components with metal enclosures or heat sinks. 

Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides.

Flux Colophony Rosin Core 100g features:
Flux rosin, solid resin, neutral ph for correct electronic welding.
-Does not cause corrosion of non-ferrous metals
-Does not cause short circuits
-It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners
-Cleans and prepares the surfaces and components to be welded, and facilitates the adherence and fluidity of the tin, improving welding in electronics works
Use a toothpick for the application. Do not apply in excess.
SECURITY:
-Use in ventilated spaces. Do not inhale vapors that are released when welding
-Keep the pot tightly closed and out of reach of children
-Do not eat. It is not toxic
-Rarely irritating to skin contact

Flux Colophony Rosin Core 40g features:
Flux rosin, solid resin, neutral ph for a correct electronic welding.
- They do not cause corrosion of non-ferrous metals
- Does not cause short circuits
It melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.
Use a toothpick for the application. Do not apply in excess.
Security:
- Use in ventilated spaces. Do not inhale vapors that are released when welding
- Keep the pot tightly closed and out of the reach of children
- Do not eat. It is not toxic
- Rarely irritating to skin contact

Flux gel syringe 1.4cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases).

Flux gel 100cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases).

Flux Solder Paste in Tin Can 100g features:
- Welding paste according to DIN EN 29454-1 1.1.2.C.
- Flux paste based on medium activity rosin.
- Easy to solder: copper, silver plated, zinc and nickel. Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.
Operating temperature of up to 350 C.

Flux Solder Paste in Tin Can 40g features:
- Welding paste according to DIN EN 29454-1 1.1.2.C
- Flux paste based on medium activity rosin
- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.
Operating temperature of up to 350 C.

Flux rosin, solid resin, neutral pH for correct electronic soldering
- They do not cause corrosion of non-ferrous metals
- Does not cause short circuits
Melts with temperature, spreads over the area to be welded and penetrates into the most difficult corners cleans and prepares the surfaces and components to be welded, and facilitates adhesion and tin fluidity, improving soldering in electronics jobs.
Use a toothpick for the application. Do not apply excessively.
Safety:
- Use in ventilated spaces. Do not inhale the fumes that are given off by welding.
- Keep the bottle tightly closed and out of the reach of children.
- Do not ingest. Non-toxic
- Rarely irritating to skin contact

Characteristic: - Solder paste according to DIN EN 29454-1 1.1.2.C.
- Flux paste based on activity rosin medium.
- Easy to weld: copper, silver, zinc and nickel plated. Flux residues after soldering do not cause corrosion of non-ferrous metals and can remain in the joints .
Operating temperature up to 350 C.

Graphite Grease Spray Anticorrosive 100ml features:
Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: - Car leaf springs
- Worm gear
- Change gear train
- Screw thread
- Screwbolt which are exposed to corrosion
- Chains and other hardly burden nodes of friction working in a temperature range from -20°C to 50°C

Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: car leaf springs etc.

Graphite Varnish cCan be used for the elimination of discontinuities in the graphite layer in printed circuits. Creation or reconstruction of routes in printed circuits of low intensity. Protection of silver contacts from harmful direct contact of silver with rubber (in remote controls)

Anti-Adhesive No-Fat Dry Spray Based on PTFE. Dry, no-fat, anti-adhesive agent based on pure PTFE. Perfect greasing solution for surfaces that must be slippery, especially when it is required to protect them against contamination present in the environment. Very low friction factor.

Anti-Adhesive No-Fat Dry Spray Based on PTFE 100ml. Dry, no-fat, anti-adhesive agent based on pure PTFE

The preparation is applied to protect and improve the performance of the shock absorbers. Extends its useful life, cleans and maintains, adds liquidity in the operation.
It shows anticorrosive properties. The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.
Does not contain silicone, Teflon, graphite. It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application.

Silicone and Protective Grease with Teflon 20g features:
- Protects against weathering
- Preserves surfaces, rubber, plastics
- Covers a wide range of operating temperatures: from -40°C to 260°C
- Silicone and Protective Grease with Teflon 20g features:
a very good chemical resistance to oxidation
- Water solutions of acids, bases, sulfur dioxide, ammonia
- Applications: audio equipment

Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features:
- Maintenance and lubrication of sanitation and taps,
- Copiers, scanners, printers and faxes,
- Gears,
- Audio and video equipment,

Silicone and Protective Grease with Teflon 60g features:
- Protects against weathering
- Preserves surfaces, rubber, plastics
- Covers a wide range of operating temperatures: from -40°C to 260°C
- Silicone and Protective Grease with Teflon 60g features:
a very good chemical resistance to oxidation
- Water solutions of acids, bases, sulfur dioxide, ammonia
- Applications: audio equipment

The grease reduces the friction of the metal parts to a minimum. Provides lasting protection against rinsing and abrasion.
Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis.

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. Insulating Varnish Spray 400ml features:
-A protective film, transparent.
-Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination
-It maintains the welding, to carry out a subsequent welding it is not necessary to eliminate the
protective film
-PVB 16 is used, for example, in the storage of printed circuit boards and material that is going to be
soldier, such as welding terminals or conductors.
-Temperature of application: od -40 ° C + 60 ° C.

Isopropyl alcohol is used for cleaning: - of electronic devices such as contact tips (such as those of ROM cartridges)
- tapes magnetic and disk heads (such as those for audio and video recorders and floppy drives)
- laser lenses on optical disc drives (eg CD, DVD) and removal of thermal paste of heat sinks and integrated circuit packages (for example: CPU)
-of the keyboard and LCD screen
-Usefully used to clean photographic lens lenses and contacts of electronic devices as it leaves no marks and is quick to evaporate.

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (such as those of ROM cartridges).
- magnetic tapes and disc heads (such as those of audio and video recorders and flexible disk drives).
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal paste from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and the LCD screen. Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for shales.

Isopropyl alcohol is used for cleaning: - of electronic devices, such as contact tips (such as those of ROM cartridges)
- magnetic tapes and disk heads (such as those of audio and video recorders and flexible disk drives)
- laser lenses in optical disk drives (for example: CD, DVD) and the removal of thermal grease from heat sinks and integrated circuit packages (for example: CPU)
-the keyboard and the LCD screen

Isopropyl alcohol is used for cleaning: - of electronic devices such as contact tips (such as those of ROM cartridges)
- tapes magnetic and disk heads (such as those for audio and video recorders and floppy drives)
- laser lenses on optical disc drives (eg CD, DVD) and removal of thermal paste of heat sinks and integrated circuit packages (for example: CPU)
-of the keyboard and LCD screen
-Usefully used to clean photographic lens lenses and contacts of electronic devices as it leaves no marks and is quick to evaporate.

Isopropyl Alcohol Propanol Spray 300ml features:
Isopropyl alcohol is used for cleaning: -Electronic devices, such as contact tips (like those of ROM cartridges)
-Magnetic tapes and disc heads (such as those of audio and video recorders and floppy disk drives)
-Laser lasers on optical disc drives (for example: CD, DVD) and thermal paste removal from heat sinks and integrated circuit packages (for example: CPU)
-From the keyboard and the LCD screen

Isopropyl alcohol is used for cleaning: - Of electronic devices, such as contact tips (like those of ROM cartridges)
- Magnetic tapes and disc heads (such as those of audio and video recorders and floppy disk drives)
- Laser lenses in optical disk drives (for example: CD, DVD) and thermal paste removal from heat sinks and integrated circuit packages (for example: CPU) of the keyboard and LCD screen Very used in the cleaning of lenses of photographic lenses and contacts of electronic devices, since it does not leave marks and is of rapid evaporation. It is sold commercially also as a cleaner for slates.

The PCB PLUS cleaner is designed for printed circuit boards.
Dissolves waste flux, including resin.
The liquid does not attack the substrate or the structural components of the printed circuit boards.
The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.
PCB Plus Cleanser Spray 100ml features:
- Shape: Spray
- Capacity: 100ml
Application:
- The product does not leave deposits
- It evaporates very fast
- Eliminates waste after welding
- Perfect in any electronic service
- The product does not react with most plastics used in electronics

The PCB PLUS cleaner is designed for printed circuit boards.
Dissolves waste flux, including resin.
The liquid does not attack the substrate or the structural components of the printed circuit boards.
The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.
PCB Plus Cleanser Spray 400ml features:
- Form: spray
- Capacity: 400ml
Application:
- The product does not leave deposits
- It evaporates very fast
- Eliminates waste after welding
- Perfect in any electronic service
- The product does not react with most plastics used in electronics

Self-adhesive label remover - removes labels form all kinds of packaging. Caution: the preparation may imperceptibly dissolve a colorful print under the removed label as well as dissolve some plastics - caution recommended!

Liquid Flux Alcohol Base TK83 100ml 
Flux liquid alcohol based for electronic welding. Type of flux: rosin
No Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC.

Liquid Flux for Alcohol-Based Rosin Welding 15ml features:
- Flux liquid alcohol-based for electronic welding
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- Capacity: 15ml
- Content of solid bodies 0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

Liquid Flux RF800 100ml Alcohol Based Rosin Welding features:
- Flux liquid alcohol based for electronic welding.
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- 100ml capacity
- Content of solid bodies0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

Liquid Flux 50ml Solder Colophony Alcohol Base features:
- Liquid Flux alcohol-based for electronic welding
- Type of flux: Colophony
- No Clean, Lead Free, Non-conductive
- Form: liquid
- Type of packaging: bottle
- Use of welding equipment to tin elements coated with polyurethane varnishes
- Properties of welding equipment can be washed with alcohol-based agents
- Content of solid bodies: 24%
- Density (at a temperature of 20 ° C): 0.86g / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.
It cleans easily with alcohol.

Machine Cup Grease with Dispenser 65ml features:
- Product designed for lubrication of various bearings, joints and guideways. It works in temperatures from -24°C to 135°C at high loads. Resistant to washing-out with cold water. Provides protection against corrosion

Microfiber Cleaning Cloth features:
- Microfiber cleaning cloth is perfect for cleaning laptops, screens, keyboards, computer casings, printers, copying machines, scaners, phones, telefaxing machines as well as other such devices. Cleans firmly without leaving stains and smudges

The most popular multifunctional preparation worldwide. Six times more recognisable than other preparations of this type on the market. It has excellent lubricating, cleaning and protective properties. Cleans and preserves, eliminates creaking and squeaking, removes water, loosens rusty parts, frees jammed mechanisms, protects metal surfaces against corrosion. Does not contain silicone.

Potentiometer Cleaner - Spray 60ml features:
A special preparation for potentiometers, perfectly suited to remove any dirt deposited during the operation of the device, contains a special grease to reduce friction. It cleans waste contacts, also regenerates them.

Necessary for the protection of printed circuits.
PCB varnish of high quality for manufacturing, repair and maintenance.
Prevents the oxidation of printed circuit boards during intermediate storage. PVB Varnish 60 Transparent Insulation 50ml features:
A protective film, transparent.
Protects soft metals for welding (eg copper, steel, lead, tin, brass) against corrosion, moisture, oxidation, dust, chemical contamination.
Maintains welding, to perform a subsequent welding is not necessary to remove the protective film.
PVB 60 is used, for example, in the storage of printed circuit boards and material to be welded, such as welding terminals or conductors.
-Temperature of application: -40°C + 60°C.
-Operating temperature: -50°C + 150°C.