AG Extreme thermal grease 3g syringe

The preparation is applied to protect and improve the performance of the shock absorbers. Extends its useful life, cleans and maintains, adds liquidity in the operation.
It shows anticorrosive properties. The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.
Does not contain silicone, Teflon, graphite. It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application.

Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.
It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.
It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features:
- Excellent dielectric properties
- It is used in different industrial processes as a lubricant (due to its greasy consistency)
- Particularly suitable for lubricating plastic and rubber parts
- Ideal as an insulating coating that does not harden
- High quality - Made in EU

AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.
This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.
Thermal conductivity:> 2.8 W / mK,

Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features:
- Maintenance and lubrication of sanitation and taps,
- Copiers, scanners, printers and faxes,
- Gears,
- Audio and video equipment,

Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.
A special brush facilitates the application of the paste.
Diamond powder content: 10%
AG Extreme thermal grease 4g flask features:
- Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,
- Thermal impedance: <0.065 ° C in2 / W
- Specific gravity:> 2.4g / cm3,
- Evaporation: <0.001%,
- Fluency: <0.001%,
- Electrical conductivity: insulation,
- Viscosity: 1000 cP,
- Working temperature from -40ºC to + 300ºC,
- Supported temperatures: -40ºC to + 350ºC,
- Gray.
Mode of use:
- Store in a well ventilated, cool and dry place.

AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK.

Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: car leaf springs etc.

Silicone and Protective Grease with Teflon 60g features:
- Protects against weathering
- Preserves surfaces, rubber, plastics
- Covers a wide range of operating temperatures: from -40°C to 260°C
- Silicone and Protective Grease with Teflon 60g features:
a very good chemical resistance to oxidation
- Water solutions of acids, bases, sulfur dioxide, ammonia
- Applications: audio equipment

Ceramic Grease Spray Non-stick Antifriction 100ml features:
The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C. Prevents the €˜seizure€™ of metals. Anti-corrosion and anti-seizure properties - excellent protection. Facilitates dismounting of the pre-lubricated parts. It does not contain metal compounds or silicone. It is resistant to chemicals, water and weather conditions. Application:  - Installation of boilers, furnaces, motors, heating systems, water pumps
- Exhausts, manifold mounting screws, heads, hubs
- Breaking systems, ABS, ASR and ESP systems

Machine Cup Grease with Dispenser 65ml features:
- Product designed for lubrication of various bearings, joints and guideways. It works in temperatures from -24°C to 135°C at high loads. Resistant to washing-out with cold water. Provides protection against corrosion