Peltier Ceramic Cell TEC1 12706 12V 60W Peltier Ceramic Cell TEC1 12706 12V 60W features: - Max Power: 60w - Voltage: 12v - Max Voltage: 15,2v - Max Current: 6A - Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC Code M0055 Available Price €3.26
Electrical Contacts Cleaner Spray Kontakt S 60ml A preparation to remove oxides and sulphites from electrical contacts and protection against corrosion.It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.For cleaning contacts, electrical terminals, alternators, switches, sockets, sockets, integrated, lampholders, fuseholders, capacitor contacts, flowmeters, etc. Electrical Contacts Cleaner Spray 60ml features: - Restores low resistance in connections- Used in audio technologies- Protection against moisture and corrosion- High quality - Made in EU- No to the most usual materials of electrical systems Code Q0019 ✗ Out-of-Stock Price €2.06
Soldering Acid AG 35ml Welding Acid AG 35ml features:Prepared transparent liquid, acidic, corrosive.Prepares and facilitates welding on nickel-plated surfaces.Apply a small amount of the preparation on the element to be welded, and then wash it with water. CAUTION:Dangerous preparation, contains up to 35% phosphoric acid. In case of contact with skin or eyes, wash with plenty of water and consult a doctor. Keep closed and out of reach of children. It causes burns. Risk of serious eye damage. Code Q0056 Last items in stock Price €2.22
Adhesive Thermal Paste Glue 10g CPU Totally new and of high quality.Dissipate the heat of the computer by refrigerating it effectively.It is used to attach passive dissipaters to graphic memories and chip plates and LED diodes.Make sure to put the components correctly, once it has dried it will not be able to detach. Adhesive Thermal Paste Glue 10g CPU features: - Color white- Surface drying time [25 ° C, min]: 2- 8- Hardness: 45 -75- Tensile strenght (Mpa): 2.0- Elongation (%): 100- Thermal Conductivity W / mk:> 1,0- Volume Resistance (c-in / W): <2.0 x 10 * 15- Dielectric strength (KV / mm): 20- Dielectric Constant: 3.0- Dielectric loss factor (60Hz): 0.003- Operating temperature (max): 200 ° C Code Q0006 Available Price €3.26
Sodium Persulfate - etching agent for PCB and copper - pack 100g Chemical substance for recording printed circuits and copper. Unlike ferric chloride, sodium persulfate is colorless, odorless, does not stain clothes and does not turn blue when it runs out. Easy to dissolve. It acts very regular with guarantee of contour sharpness. Code Q0053 Available Price €2.36
SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features: Flux liquid alcohol-based for electronic welding.Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductiveForm: liquidCapacity: 50mlContent of solid bodies: 0 ... 5%Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.It cleans easily with alcohol.It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.- Keep the boat tightly closed and far away from the children.- Use in ventilated spaces. Code Q0013 Available Price €2.88
Battery holder 1x 18650 3.7V Power cable Characteristic: - Cable 15cm long - Measurements 74x21x 19mm - Weight: 8 gr. (approx.) - Stack length max 67mm Code PP014 Available Price €0.82
A4 Thermal Transfer Film for DIY PCB circuits Thermal transfer paper enables PCB manufacturing. After designing the printed circuit in one of many programs, you must print the project on paper on a slippery page (in the reflected image) with a laser printer. The pattern (printed side) is transferred to the laminated plate from the copper side using the hot iron (the toner adheres to the copper under the influence of temperature). It remains only to peel off the paper under water and start to engrave the laminate. It can be attacked with the Printed Circuit Recorder solution A4 Thermal Transfer Film for DIY PCB circuits features: - material: A4 thermal transfer foil - quantity: 1 sheet Code H0173 Last items in stock Price €0.37
Grease TF silicone + PTFE 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Last items in stock Price €1.07
Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.64
Graphite Grease Spray Anticorrosive 100ml Graphite Grease Spray Anticorrosive 100ml features: Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: - Car leaf springs- Worm gear- Change gear train- Screw thread- Screwbolt which are exposed to corrosion- Chains and other hardly burden nodes of friction working in a temperature range from -20°C to 50°C Code Q0059 Available Price €2.80
AG Extreme thermal grease 3g syringe The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK. Code Q0087 Available Price €5.66
Graphite Grease Spray Anticorrosive 65ml Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: car leaf springs etc. Code Q0108 Available Price €1.94
Multi-purpose spray WD-40 250ml The most popular multifunctional preparation worldwide. Six times more recognisable than other preparations of this type on the market. It has excellent lubricating, cleaning and protective properties. Cleans and preserves, eliminates creaking and squeaking, removes water, loosens rusty parts, frees jammed mechanisms, protects metal surfaces against corrosion. Does not contain silicone. Code Q0147 Last items in stock Regular price €5.36 -€0.50 Price €4.86
Grease TF silicone + PTFE 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 ✗ Out-of-Stock Price €5.36
Grease TF silicone + PTFE 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Last items in stock Price €2.80
Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Regular price €3.71 -€0.50 Price €3.21
AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK. Code Q0089 Last items in stock Price €3.22
Grease TF silicone + PTFE 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Last items in stock Price €1.07
Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.64
Graphite Grease Spray Anticorrosive 100ml Graphite Grease Spray Anticorrosive 100ml features: Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: - Car leaf springs- Worm gear- Change gear train- Screw thread- Screwbolt which are exposed to corrosion- Chains and other hardly burden nodes of friction working in a temperature range from -20°C to 50°C Code Q0059 Available Price €2.80
AG Extreme thermal grease 3g syringe The AG Extreme paste provides excellent heat conduction between elements such as: a radiator that discharges heat and a fan, CPU, GPU.The substance is a dielectric (it is not an electrical conductor), which protects against various electrical hazards. Thermal conductivity 6W/mK. Code Q0087 Available Price €5.66
Graphite Grease Spray Anticorrosive 65ml Graphite Grease- the product has excellent lubricating qualities and is provides an effective anticorrosive protection. The addition of graphite increases its resistance to burdens and the action of cold water. Application: car leaf springs etc. Code Q0108 Available Price €1.94
Multi-purpose spray WD-40 250ml The most popular multifunctional preparation worldwide. Six times more recognisable than other preparations of this type on the market. It has excellent lubricating, cleaning and protective properties. Cleans and preserves, eliminates creaking and squeaking, removes water, loosens rusty parts, frees jammed mechanisms, protects metal surfaces against corrosion. Does not contain silicone. Code Q0147 Last items in stock Regular price €5.36 -€0.50 Price €4.86
Grease TF silicone + PTFE 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 ✗ Out-of-Stock Price €5.36
Grease TF silicone + PTFE 20g Silicone and Protective Grease with Teflon 20g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 20g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0093 Last items in stock Price €2.80
Silicone Oil 300ml Spray Descripción: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50 ° C to + 200 ° C and has various applications.It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces. Silicone Oil 300ml Spray features: - Excellent dielectric properties- It is used in different industrial processes as a lubricant (due to its greasy consistency)- Particularly suitable for lubricating plastic and rubber parts- Ideal as an insulating coating that does not harden- High quality - Made in EU Code Q0009 Available Regular price €3.71 -€0.50 Price €3.21
AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK. Code Q0089 Last items in stock Price €3.22