2x Electronic Clips Crocodile 2x50mm Black + Red pack 2pcs 2x Electronic Clips Crocodile 2x50mm Black + Red features: - Length: 50mm- Quantity: 2 units Code K0026 Available Price €0.99
Integrated Circuit Supports DIP16 Width 10.16 mm Integrated Circuit Supports DIP16 Width 10.16 mm features: - Type: DIP DIL- Total number of pins: 16- Step between pins: 2.54 mm- Material: Polybutylene terephthalate- Length: 17.78 mm- Width: 10.16 mm- Temperature min .: -25 °C- Max temperature: +85 °C- RoHS compliant Code Z0006 Backorder Price €0.15
Silicone Thermal Conductive Paste H 0.5g Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:It facilitates the transfer of heat between the electronic components and the radiator.It's necessary for the correct operation of any type of temperature sensors.Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.-Density at 20°C: 2.58 G/cm3-Points: 350°C-Freezing point: -50°C-Coefficient of refraction: 1.405,- Specific temperature at 50°C: 0.243 Cal/g K-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K-Constant dielectric at 100 Hz: 4.7 (± 0.1)-Cross resistance: 5x10 to power 14 Ohm x cm Code Q0080 Available Price €0.59
Flux Solder Paste in Tin Can 100g Flux Solder Paste in Tin Can 100g features: - Welding paste according to DIN EN 29454-1 1.1.2.C.- Flux paste based on medium activity rosin.- Easy to solder: copper, silver plated, zinc and nickel. Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0041 Available Price €4.49
Alligator clip connectors Red + Black pack 2unds Alligator clip connectors Red and Black. Code K0255 Available Price €0.59
Heat Shrinkable Tube 5 Colors 3 Meters Package Heat Shrinkable Tube 5 Colors 3 Meters Package features: - Heat shrink tubing is used to connect electrical cables, isolate resistor and capacitor points, mark and protect cables Electrical, protect metal bars or tubes against corrosion and protect antennas. - These heat shrink tubes are very flexible and of high quality. Made in EU - Different sizes of 20 cm each are delivered: * 1,6mm: black, brown, red, yellow, orange * 2,4mm: black, brown , red, yellow, blue * 3,2mm: black, brown, red, yellow, blue - Quantity: 15 units - Material: polyolefin - Shrinkage ratio: 2: 1 (maximum reduce to 1/2 of its supplied diameter) - Minimum shrinkage temperature: 115 ° C maximum 200 ° C Code K0047 Available Price €1.95
PLA Filamento 1.75mm 0.85kg Yellow color amarillo Premium Bobina para Impresora 3D Code I0415 Backorder Price €17.49
Grease TF silicone + PTFE 3.5g Silicone grease with PTFE (Teflon) that protects from the weather, preserves surfaces, rubber, plastics, covers a wide range of operating temperatures: from -40 ° C to 210 ° C, has a very good chemical resistance to oxidation, the solutions in water of acids, bases, sulfur dioxide, ammonia. The silicone is specially formulated to lubricate and clean parts with rubber. Teflon is an additive to improve the lubricating properties, what it does is that, once the oil dries, it continues to lubricate, it increases the adherence. Silicone and Protective Grease with Teflon 3.5g features: - Maintenance and lubrication of sanitation and taps,- Copiers, scanners, printers and faxes,- Gears,- Audio and video equipment, Code Q0065 Last items in stock Price €1.29
Grease for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers. Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties. The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite. It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Code Q0098 Last items in stock Price €3.79
Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity. It is designed to seal threaded connections in high pressure conditions and at elevated temperatures. Provides easy assembly and disassembly of connections. Prevents the seizure of threaded connections. Code Q0099 Available Price €3.75
Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99
Grease Dry TF Spray 100ml Anti-Adhesive No-Fat Dry Spray Based on PTFE 100ml. Dry, no-fat, anti-adhesive agent based on pure PTFE Code Q0068 Available Price €3.79
Grease TF silicone + PTFE 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 ✗ Out-of-Stock Price €6.49
AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.Thermal conductivity:> 2.8 W / mK, Code Q0090 Available Price €4.25
Ceramic Grease Spray 400ml Ceramic Grease Spray, non-stick antifriction. The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C.Application: Installation of boilers, furnaces, motors, heating systems, water pumps. Code Q0096 Last items in stock Price €5.95
AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €9.85
AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK. Code Q0089 Available Price €3.90
Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum. Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Code Q0097 Last items in stock Price €3.19
Grease for dampers 100ml The preparation is applied to protect and improve the performance of the shock absorbers. Extends its useful life, cleans and maintains, adds liquidity in the operation.It shows anticorrosive properties. The product leaves a thin transparent protective layer, prevents the deposition of dirt, grease.Does not contain silicone, Teflon, graphite. It displaces water and reduces friction well, causing the performance of even very old and neglected shock absorbers to improve significantly in a few moments after application. Code Q0098 Last items in stock Price €3.79
Assembling lubricant 100ml Assembly grease to prevent the seizure of metal threaded parts exposed to extreme pressure and humidity. It is designed to seal threaded connections in high pressure conditions and at elevated temperatures. Provides easy assembly and disassembly of connections. Prevents the seizure of threaded connections. Code Q0099 Available Price €3.75
Silicone Oil 50ml Silicone Oil 50ml features: Silicone oil, also called silicone fluid, is a liquid with a greasy and sticky consistency.It has the characteristics of being odorless and colorless, it is stable at high temperatures -50°C to +200°C and has various applications. It has high lubrication capacities and due to its low molecular attraction facilitates the spreading on different surfaces: - excellent electrical properties- it is used in different industrial processes as a lubricant (due to its greasy consistency) Particularly suitable for lubricating plastic and rubber partsIdeal as an insulating coating that does not harden Code Q0032 Available Price €1.99
Grease Dry TF Spray 100ml Anti-Adhesive No-Fat Dry Spray Based on PTFE 100ml. Dry, no-fat, anti-adhesive agent based on pure PTFE Code Q0068 Available Price €3.79
Grease TF silicone + PTFE 60g Silicone and Protective Grease with Teflon 60g features: - Protects against weathering- Preserves surfaces, rubber, plastics- Covers a wide range of operating temperatures: from -40°C to 260°C- Silicone and Protective Grease with Teflon 60g features: a very good chemical resistance to oxidation- Water solutions of acids, bases, sulfur dioxide, ammonia- Applications: audio equipment Code Q0060 ✗ Out-of-Stock Price €6.49
AG Gold thermal grease 3g syringe AG Gold is a high quality thermal conductive paste. Due to its gold content, its thermal conductivity is 3 times higher than in the case of normal pasta.This allows the processor to lower the processor temperature by approximately 6 degrees, even without changing the radiator. Pasta is the best alternative for overlockers.Thermal conductivity:> 2.8 W / mK, Code Q0090 Available Price €4.25
Ceramic Grease Spray 400ml Ceramic Grease Spray, non-stick antifriction. The product is ideal for use on parts under heavy mechanical and thermal loads. Working temperatures: -40 to 1200°C.Application: Installation of boilers, furnaces, motors, heating systems, water pumps. Code Q0096 Last items in stock Price €5.95
AG Extreme thermal grease 4g flask Ideal for any processor, chip set, GPU and other subsets. It is characterized by a good thermal conductivity due to the use of diamond dust.A special brush facilitates the application of the paste.Diamond powder content: 10% AG Extreme thermal grease 4g flask features: - Manufacturer: TermoPasty,- Thermal conductivity:> 4 W / mK,- Thermal impedance: <0.065 ° C in2 / W- Specific gravity:> 2.4g / cm3,- Evaporation: <0.001%,- Fluency: <0.001%,- Electrical conductivity: insulation,- Viscosity: 1000 cP,- Working temperature from -40ºC to + 300ºC,- Supported temperatures: -40ºC to + 350ºC,- Gray. Mode of use: - Store in a well ventilated, cool and dry place. Code Q0088 Available Price €9.85
AG Silver thermal grease 3g syringe AG Silver is a thermal conductive paste with the addition of silver compounds. Its thermal conductivity is much greater than the conductivity of typical carbon-silicon compounds. Thermal conductivity 3.8W/mK. Code Q0089 Available Price €3.90
Grease with molybdenum disulfide 100ml The grease reduces the friction of the metal parts to a minimum. Provides lasting protection against rinsing and abrasion.Perfectly protects the elements of suspension systems, steering systems and any mobile part of the chassis. Code Q0097 Last items in stock Price €3.19