RFID or Radio Frequency Identification is a technology that has found its way into a multitude of uses today. From cards for buildings to tags used to open doors. It is a very effective and simple technology which influences its economical applications. In our offer you will find RF emitter modules as well as tags and cards. Check our offer to find the component you need!
Subcategories
M0052
NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz features:
- Standard: NFC Forum Type2 Tag Ntag215
- Protocol: ISO14443A
- Memory: 540B (504B) EEPROM - Operating frequency: 13.56MHZ
- Reading distance: 0-10CM
- Communication speed: 106Kboud
- Working temperature: -20ºC to 70ºC
- Number of uses 100,000 times
- Data retention: 10 years
- Material: PVC
- Dimensions 86 x 54 x 0.84 mm
M0033
NFC RFID Tag Card 13.56 MHz can be used in Access Control projects and Alarm, Arduino, Raspberry PI, PIC, AVR projects.
M0177
Can be used in Access Control projects and Alarm, Arduino, Raspberry PI, PIC, AVR projects 10x NFC RFID round card 13.56 MHz features:
- 32 bit unique code
- Protocol: ISO14443
- Compatible with Mifare S50 Classic
- Memory: 1kB EEPROM
- Operating frequency: 13.56MHz
- Communication speed: 106Kboud
- Reading distance: 2.5-10CM
- Reading time: 1-2MS
- Working temperature: -20 ºC to 85 ºC
- Number of uses 100,000 times
- Data retention: 5 years
- Material: PVC
- Dimensions: Ø 25 x 0.8 mm
- Quantity: 10 units of NFC 13.56MHz card
M0015
It is compatible with almost any microcontroller, Arduino, PIC, AVR.
It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features:
- Supports Quick CRYPTO1 and MIFARE
- Operating current: 13-26mA at 3.3V
- Standby current: 10-13mA to 3.3V
- Sleep-mode current: <80μA
- Maximum current: 30mA
- Frequency of operation: 13.56Mhz
- Reading distance: 0 to 60mm
- Communication protocol: SPI
- Maximum SPI speed: 10Mbit / s
- Maximum data rate: 10Mbit / s
- Operating temperature: -20 to 80ºC
- Humidity of operation: 5% -95%
M0030
NFC RFID Keychain Tag 13.56 MHz features:
- 32 bit unique code
- Protocol: ISO14443
- Compatible with NFC Mifare 1k
- Memory: 1kB EEPROM
- Operating frequency: 13.56MHZ
- Communication speed: 106Kboud
- Reading distance: 2.5-10CM
- Reading time: 1-2MS
- Working temperature: -20ºC to 85ºC
- Number of uses 100,000 times
- Data retention: 10 years
- Material: ABS
- Dimensions 40.5 x 32 x 4.2 mm
W0091
NFC module for Educational STEAM Kit. Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Compatible with almost any microcontroller, Arduino, PIC, AVR. It can be used in Access Control projects and Alarm projects. RFID PN532 NFC Module with Card and Pendant features:
- Support i2C, SPI, High Speed UART - Support RFID reading and writing - Support P2P communication with peers - Support NFC with phone - Work in NFC Mode or RFID reader/writer Mode - RFID reader/writer supports: - 1k, 4k, Ultralight, and DesFire cards ISO/>
W0092
NFC module for Educational STEAM Kit. Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters. Compatible with almost any microcontroller, Arduino, PIC, AVR. It can be used in Access Control projects and Alarm projects. RFID PN532 NFC Module features:
- Based on the NXP PN532 chip, it can be used for non-contact communication of 13.56M.
- Greater effective communication distance of 3 cm.
