Mechanical accessories

For Arduino, Smart Car, Robotics.
Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC DIY Arduino UNO Mega Robotics features:
- Operating voltage: 1.5V to 6V
- DC current: 350mA
- Torque max.: 15g / cm
- Max speed: 12000rpm
- Weight: 16.5 g

Servo Arm 25T Aluminium for Futaba MG996 MG995 Hitec JR features:
- 25T Servo Arm for Futaba, Tower Pro and High Power Servos
- Material: Aluminum
- Color: red
- Size: 35.5 x 15 x 6mm
- Weight: 4 grams
- M3 thread for joints of cars or helicopters.
- Hole distance 20 and 24 mm from the servo outlet.
- Quantity: 1 unit

Tower Pro Micro Servo 9g SG90 features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

Characteristic:
-Metric thread M3
-Male-Female separator 25mm
-Quantity: 5 units

DC Gear Motor 6V 148 Arduino features:
- Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Reduction: 1:48

DC Gear Motor N20 200 RPM 12V DIY Robot features:
- Voltage: 12V
- Speed of rotation: 200RPM
- Motor dimensions:
* Diameter 12 mm
* Height 24 mm
- For Arduino, Smart Car, Robotics, Fans, Appliances

Continous Rotation 360 Degree Servo S3003 features:
- Operating voltage: 4.8 V to 6 V
- Torque max.: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)
- Radio max.: 360º
- Temperature range: -20º + 60ºC degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacture

Micro Servo Compatible with MG90S features:
- Operating voltage: 4.8Vdc (5V) or 6Vdc
- Torque: 1.80 kg / cm at 4.8V and 2.20kg / cm at 6V
- Speed: 0.1seconds / 60º at 4.8V and 0.8 seconds / 60º at 6V
- Gear type: metallic
- Turning width: 180º
- Temperature working: from -30 to 60 ºC
- 3 plastic propellers / arms
- Fixing screws
- Size: 22.6 x 11.8 x 31 mm
- Weight: 13.4 gr

Car Robot Tire Wheel Smart Car features:
- Dimensions of the wheel:
   - Diameter: 65mm
   - Width: 26 mm
- Quantity: 1 unit

28BYJ-48 Stepper Motor 12V + Driver Board ULN2003 features:
- Stepper motor 28BYJ-48 + ULN2003 controller
- The 28BYJ-48 has everything you need to start using motors step by step in your project
- A stepper motor converts digital impulses into small steps of movement in one direction
- The motor also comes with a ULN2003 motor controller card
- Can control two DC motors or a motor with bipolar steps with a maximum amperage of up to 500 mA
- Equipped with state indicator LEDs A, B, C, D
- Engine model: 28BYJ-48
- Phasing Engine: 4
- Operating voltage: 12V DC
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 Ohm
- Angle per step: 5,625º
- Steps per round: 64

DC Gear Motor and Tire Wheel for Smart Car Robot features:
- Voltage: 3 to 6 Vdc
- Reduction: 1:48
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Dimensions of the wheel: diameter 65mm - width 26 mm

the robot car motor holder and assembly accessories

Servo with Rotation 180 Servo Motor Type S3003 features:
- Model Aircraft Futaba Arduino Robotics
- Operating Voltage: 4.8V to 6V
- Max Torque: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60 degrees (4.8V), 0.19sec / 60 degrees (6V)
- Max radius: 180º
- Temperature range: -20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacturing

Servo Motor Type S3003 Aeromodelling features:
- Operating voltage: 4.8 V to 6 V
- Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V)
- Max radius: 180 ° (90º in each direction)
- Temperature range: - 20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR - Chinese Manufacture

High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features:
- Operating voltage: 4.8 V to 7.2 V
- Consumption: 100mA
- Torque max.: 12kg / cm (6V)
- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)
- Max. Radio: 180ºC
- Temperature range: 0-55 degrees
- Weight: 55 g
- Cable length: 29cm
- Dimensions: 54 x38x 20 mm
- Servo connector: JR (JR and Futaba adaptable)

Platform camera + 2 SG90 Servo Motor 9g Arduino Kit features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Force: 1.2kg / 42.3oz (4.8V), 1.6kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 Degree C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm Contents: - Servo 9g - 2 units
- Platform for camera - 1 unit

5x Hexagonal Separator M3 10mm Male-Female Brass features:
-Metric thread M3
-Male-Female Separator 10mm
-Quantity: 5 units

Geared Motor with Encoder (6V 148 L Shape) features:
- Voltage: 3 to 6V DC
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Reduction: 1:48

Geared Motor with Encoder 6V 1120 Arduino Smart Car Robot features:
- Voltage: 3 to 6Vdc
- Speed without load: 200 RPM to 6Vdc
- No-load current: 110mA at 3Vdc - 250mA at 6Vdc
- Reductive: 1: 120

The module for DIY Arduino hobby
Motor driver L9110 for Arduino, Smart Car, Robotics
Small magnet electric motor for direct current (DC) L9110 Fan Motor Propeller Module 5V features:
- Operating voltage: 5V
- PCB dimension: 3.5 x 2.6cm
- Double red propeller
- Blade length 75mm
- Weight: 6 g
- Quantity:
  1x DC motor
  1x double helix

White plastic wheel with silver tone metal support.
It allows a 360° rotation, provides a good resistance to rolling, wheel silently and without problems. Wheels 30mm PP 360° Rotation for Cylindrical Use features:
- Main material: Polypropylene (PP), steel
- Main color: White, silver tone
- Total size: Total height: 45mm / 1.8 "
- Wheel size: 30 x 13mm / 1.2 "x 0.5" (P * A)
- Hole diameter for mounting: 4mm / 0.16 "
- Space between holes: 28 x 22mm / 1.1 "x 0.9" (L * P)
- Size of the top plate: 38 x 32mm / 1.5 "x 1.3" (L * P)

The 28BYJ-48 has everything you need to start using stepper motors in your project. A stepper motor converts digital impulses into small movement steps. in one direction Characteristic: - Motor model: 28BYJ-48
- Motor phases: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per lap: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm
- Operating temperature: -45ºC to + 125ºC
- Motor cable length: 19cm
- Motor block diameter: 28mm
- Motor dimensions: 42mm x 32mm x 30mm

Gear Reducer Motor 6V DC 200RPM for Smart Car features:
- Voltage: 3 to 6V DC
- Speed without load: 200 RPM to 6V DC
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles
- Wiring of the 6V DC 200 RPM motor with the L298N double bridge H controller module

Free metal wheel with white plastic support.
It allows a 360 ° rotation, wheel silently and without problems. Free metal wheel 360° with plastic support for robotics features:
- Main material: Polypropylene (PP), Steel.
- Main color: White, silver tone. - Dimensions of support: 50x24mm. - Ball diameter: 15.80mm.  

Tower Pro Micro Servo 9g SG90 360 degree features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

Metal disc diameter 25mm with 4 mounting holes for 25T RC MG996R servos
25T metal disc for MG996R servomotors + 4 screws features:

- Material: Aluminum
- Gear teeth: 25T
- 4x M3 mounting holes rotated
- Diameter disc: 25mm
- Includes: 4 fixing screws.

9g digital servo new version of SG90.
POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque.
It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features:
Weight: 9g
Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v)
Gear type: POM with carbon fiber
Operating speed: 0.1sec /60degree (4.8v)
Temperature range: 0„ƒ_ 55„ƒ
Dead band width:1us
servo wire length: 25 cm
Servo Plug: JR (Fits JR and Futaba)
servo arms &screws included and fit with Futaba servo arm

For Arduino, Smart Car, Robotics.
Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC with cable conector male features:
- Operating voltage: 1.5V to 6V - Cable 16cm with male connector - DC current: 350mA - Torque max.: 15g / cm
- Max speed: 12000rpm
- Weight: 16.5 g

The 28BYJ-48 has everything you need to start using stepper motors in your project
A stepper motor converts digital impulses into small steps of movement in one direction The engine also comes with a ULN2003 engine controller card
Can control two DC motors or a bipolar stepper motor with a maximum amperage of up to 500 mA
Equipped with state indicator LEDs A, B, C, D 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat features:
- Engine model: 28BYJ-48
- Phases engine: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per round: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm

Characteristic:
- Motor passes 1.8º (200 steps per turn)
- Capable of loading 1.22 kg / cm

It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 4.28 kg/cm. It comes with a 1m cable. We have the best stepper motors at the best prices! 

Heat Sink Aluminium Nema 17 features:
- MK8 Extruder Radiator Heatsink Printer
- Ideal for NEMA17 motors and MK7 and MK8 extruders - Dimensions 40 x 40x 11mm

67mm L shape alloy steel mounting bracket for NEMA23 3D stepper motor printer Mounting Bracket for Nema Motor 23 57mm/76mm features:
- Compatible with Nema 23 body length: 57mm and 76mm
- Material: alloy steel
- Size: 67 x 67 x 2,7 mm
- Black color
- Fit for stepper motor as NEMA23

Mounting Bracket for Nema Engine 17 42mm features:
- Steel bracket for PAP Nema 17 3D printer motor
- Mounting bracket of 42mm L shape alloy steel for The NEMA17 3D Stepper Motor Printer
- Material: Alloy Steel - Size: 5 x 5 x 5cm
- Black Color
- Fit for 42mm Stepper Motor as NEMA17

One of the most popular stepper motors with 200 steps per revolution and a maximum load of 5 kg/cm. It comes with a 30 cm cable. We have the best stepper motors at the best prices!

It is one of the most popular stepper motors with 200 steps per turn and a maximum load of 28.5 kg/cm. Comes with a 50 cm cable. We have the best stepper motors at the best prices! Perfect for CNC machines!

Dupont female-female connector cable to PH2.00 for Nema engine features:
Dupont 2.54 female to PH2.00 female connecting cable for Nema motor Length 100cm

Small 3V-6V DC motor ideal for DIY projects

Small 3V-6V DC motor ideal for DIY projects

Small 3V-6V DC motor ideal for DIY projects

Gear Reducer Motor 5V DC 148 Robot Support Arduino Smart Car features:

- Voltage: 3 to 6Vdc

- Speed without load: 100 RPM to 6Vdc

- No-load current: 90mA to 3Vdc - 180mA to 6Vdc

- Reduction: 1:48

- Content:

* 1 unit - direct current motor

* 1 unit - support with screws

Black U-shaped servo motor mounting bracket for MG995 and MG996 servo motors. Ideal for robot arms or creating your own structures. Includes hardware.

A sliding ring capable of holding up to 12 wires of 12mm diameter.

A slip ring capable of holding up to 6 wires of 22mm diameter.

Wheels for 360 degree continuous rotation servo motors type SG90, FS90R, SG92r. The wheels have silicone tyres and measure 60 mm (2.36″) in diameter. Four additional mounting holes for 4-40 bolts allow the wheel to be used with several of our universal mounting bracket.

It is one of the most popular stepper motors with 200 steps per revolution and a maximum load of 2.6 kg/cm (0.25 Nm). It is supplied with a voltage of 12.0 V, consumes a current of 400 mA per coil. Dimensions: 42 x 42 x 34 mm (NEMA 17).  Comes with a 30 cm cable. We have the best stepper motors at the best prices!