Geared Motor with Encoder (6V 1:48 L Shape)

The 28BYJ-48 has everything you need to start using stepper motors in your project
A stepper motor converts digital impulses into small steps of movement in one direction The engine also comes with a ULN2003 engine controller card
Can control two DC motors or a bipolar stepper motor with a maximum amperage of up to 500 mA
Equipped with state indicator LEDs A, B, C, D 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat features:
- Engine model: 28BYJ-48
- Phases engine: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per round: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm

It is one of the most popular stepper motors with 200 steps per revolution and a maximum load of 2.6 kg/cm (0.25 Nm). It is supplied with a voltage of 12.0 V, consumes a current of 400 mA per coil. Dimensions: 42 x 42 x 34 mm (NEMA 17).  Comes with a 30 cm cable. We have the best stepper motors at the best prices!

For Arduino, Smart Car, Robotics.
Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC DIY Arduino UNO Mega Robotics features:
- Operating voltage: 1.5V to 6V
- DC current: 350mA
- Torque max.: 15g / cm
- Max speed: 12000rpm
- Weight: 16.5 g

DC Gear Motor 6V 148 Arduino features:
- Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Reduction: 1:48

Gear Reducer Motor 6V DC 200RPM for Smart Car features:
- Voltage: 3 to 6V DC
- Speed without load: 200 RPM to 6V DC
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles
- Wiring of the 6V DC 200 RPM motor with the L298N double bridge H controller module

High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features:
- Operating voltage: 4.8 V to 7.2 V
- Consumption: 100mA
- Torque max.: 12kg / cm (6V)
- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)
- Max. Radio: 180ºC
- Temperature range: 0-55 degrees
- Weight: 55 g
- Cable length: 29cm
- Dimensions: 54 x38x 20 mm
- Servo connector: JR (JR and Futaba adaptable)

Tower Pro Micro Servo 9g SG90 features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

White plastic wheel with silver tone metal support.
It allows a 360° rotation, provides a good resistance to rolling, wheel silently and without problems. Wheels 30mm PP 360° Rotation for Cylindrical Use features:
- Main material: Polypropylene (PP), steel
- Main color: White, silver tone
- Total size: Total height: 45mm / 1.8 "
- Wheel size: 30 x 13mm / 1.2 "x 0.5" (P * A)
- Hole diameter for mounting: 4mm / 0.16 "
- Space between holes: 28 x 22mm / 1.1 "x 0.9" (L * P)
- Size of the top plate: 38 x 32mm / 1.5 "x 1.3" (L * P)

Servo Motor Type S3003 Aeromodelling features:
- Operating voltage: 4.8 V to 6 V
- Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V)
- Max radius: 180 ° (90º in each direction)
- Temperature range: - 20 + 60 C degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR - Chinese Manufacture

DC Gear Motor and Tire Wheel for Smart Car Robot features:
- Voltage: 3 to 6 Vdc
- Reduction: 1:48
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Dimensions of the wheel: diameter 65mm - width 26 mm