Hotends

Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance features:
- E3D Long Distance Prusa 3D Printer
- Nozzle: 0.3mm
- Filament: 3.0mm
- Cartridge heater: 12V 40W with 1m cable
- Thermistor: 100K NTC 3950 ± 1% with 1m cable

Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features:
- E3D Short Distance Prusa 3D Printer
- Nozzle: 0.3mm
- Filament: 3.0mm
- Cartridge heater: 12V 40W with 1m cable
- Thermistor: 100K NTC 3950 ± 1% with 1m cable

Hotend J-Head Metal Extruder Long Distance 0.3mm 1.75 E3D Printer 3D features:
- E3D Long Distance Prusa 3D Printer
- Nozzle: 0.3mm
- Filament: 1.75mm
- Heater cartridge size: 12V 40W with 1m cable
- Thermistor: 100K NTC 3950 ± 1% with 1m cable
- Heater size: 6 x 20mm

Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features:
- E3D Short Distance Prusa 3D Printer
- Nozzle: 0.3mm
- Filament: 1.75mm
- Cartridge heater: 12V 40W with 1m cable
- Thermistor: 100K NTC 3950 ± 1% with 1m cable

Sensor used to measure the temperature of the hotend or hot bed of your 3D printer
Characteristic:
- NTC Thermistor 100 K 3950
- Impedance: 100 K (25º of Temperature)
- Accuracy: 1%
- Sensor Diameter: 1.8 mm
- Cable Length: 1 m
- Cable: AWM UL 3398 150 ° C 300V
- Ready to be installed and used. Fully insulated
- Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS

- Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable
Characteristic:
- Voltage 12V
- Power 40W
- Material: Ceramic y Stainless steel
- Cartridge diameter 6 mm
- Cartridge length 20 mm
- Cable length approx. 1000 mm

Characteristic: - Voltage 24V
- Power 40W
- Material: Ceramic and Stainless Steel
- Cartridge diameter 6 mm - Cartridge length 20 mm
- Cable length approx. 1000 mm

Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features:
- This extruder is ready to mount and print
- PC4-M6 bowden pneumatic connector
- 12V 2-wire 40x40mm fan
- Metal fan cover
- MK8 heat sink
- MK8 aluminum extruder
- PAP Nema17 3.25V 1.3A motor with cable
- Capable of loading with 4.48 kg / cm

Assembled MK8 Extruder Direct for Printer 3D features:
- This extruder is ready for assembly and printing
- 0.4mm nozzle
- NTC 100k 3950 thermistor with cable
- Heating block MK8 with thermal ceramic resistance 12v / 40W with cable
- Filament stud 1.75mm
- Fan 12V 2 cables 40x40mm with metal protection
- MK8 heat sink
- MK8 aluminum extruder
- PN Nema17 3.25V 1.3A motor with cable
- Able to load with 4.48 kg/cm

Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features:
- 3D Printer Extruder
- 0.4mm Nozzle
- 100k 3950 NTC thermistor with cable
- MK8 heater block with 12v / 40W thermal ceramic resistance with cable
- 1.75mm filament stud M6x30mm

This BLtouch sensor is an automatic leveling sensor for 3D printers that can accurately measure the inclination of your printing surface.
It can greatly improve the printing precision of your 3D printer.
Its features: are simple, smart and precise.
It could work with almost any type of bedding, such as glass, wood , metals, etc. 3DTouch's main functions and controls are the same as most automatic bed leveling sensors, consisting of an RC servo and a micro switch.

Self-leveling sensor BLtouch 3D printer features:
- Supply voltage: 5V.
- Supply current: 15mA
- Max. Current: 300mA
- Len3Dh cable: 150mm
- Wiring:
- 3 pins: Brown (-, GND) Red (+ 5V) Orange (control signal)

The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer.

This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block.

Nozzle Throat 1.75mm 3D Printer PTFE features:
- Compatible with 1.75mm filament
- Inner diameter: 2 mm
- Exterior: 6 mm (M6 thread)
- Total length: 30 mm
- Comes with Teflon PTFE core 26mm long
- Outside diameter: 4 mm
- Application: makerbot 3D printer extruder
- Material: Stainless steel

The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts.