Tower Pro Micro Servo 9g SG90 360 degree Tower Pro Micro Servo 9g SG90 360 degree features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0075 Available Price €2.95
PC4-M6 Pneumatic connector for PTFE tube quick coupler Bowden connector - a pneumatic connector with a 6 mm screw and 1.75 cm length for the 4mm tube of 3D printer couplers for 1.75 mm filament. Code I0096 Available Price €1.29
Red Laser Diode 650nm 5mW 6mm 5V This diode is mainly used for laser toys, all kinds of level meter, instruments, pointer pen, mini LCD projector, laser From remote listeners, remote control burglar alarm light. Light shots and different display can make the color of the image item a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC - Mode of point: facula point - Continuous output - Operating temperature: -36 ° C - + 65 ° C - Laser wavelength: 650nm (red) - Diameter copper head is 6mm - Power cable length: 75 mm - Cover material: Brass - Working life: more than 2000 hours - Light power: Less than 5mW - Operating current: Less than 40mA Code M0076 Available Price €1.19
Flat Cable 1m AWG28 1.27 Gray 10 Pins Flat Cable 1m AWG28 1.27 Gray 10 Pins features: - Length: 100cm - Model AWG28 - Product name: Flat cable - Number of conductors: 10 - Conductive material: Copper - Insulation voltage: 300V - Inner diameter 0.32mm - Pin Pitch: 1.27mm - Temperature: 105 ° C Code K0002 Available Price €2.50
Nozzle Head 0.4mm 3mm E3D 3D Printer Nozzle Head 0.4mm 3mm E3D 3D Printer features: - Precision Nozzle: 0.4mm - Material: Copper - Size: 13mm x 6mm - Suitable for Filament: 3mm - Quantity: 1 unit Code I0041 Available Price €1.39
Nozzle Head 1.75 0.3 MK8 3D Printer Extruder Nozzle Head 1.75 0.3 MK8 3D Printer Extruder features: - MK8 Precision Nozzle: 0.3mm - Material: Copper - Size: 13mm x 6mm - Suitable for Filament: 1.75mm - Quantity: 1 unit Code I0075 Available Price €1.29
40x Female-Female Cable 20cm 40x Female-Female Cable 20cm features: -Length: 20cm -Quantity: 40 wires -Dupont female connectors on both ends -Compatible with 2.54mm male connectors -High quality and good working condition -Easy to install and use Code K0004 Available Price €2.49
Resistor 1K Ohm 5% 0,25W 1/4W Resistor 1K Ohm 5% 0,25W 1/4W features:-1K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0013 Available Price €0.08
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Available Regular price €8.90 -20% Price €7.12
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block. Code I0188 Available Regular price €13.49 -€2.00 Price €11.49
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €8.95 -20% Price €7.16
Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0083 Available Regular price €7.95 -20% Price €6.36
Ceramic Heater Cartridge 12V 40W 3D Printer - Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable Characteristic: - Voltage 12V - Power 40W - Material: Ceramic y Stainless steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0050 Available Price €1.79
Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features: - 3D Printer Extruder - 0.4mm Nozzle - 100k 3950 NTC thermistor with cable - MK8 heater block with 12v / 40W thermal ceramic resistance with cable - 1.75mm filament stud M6x30mm Code I0102 Available Price €5.49
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.79
Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €24.90
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.59
Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance Hotend J-Head Metal Extruder 0.3mm 3.0 Cutting Distance features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0085 Available Regular price €8.90 -20% Price €7.12
Hotend Long Distance 0.4mm 1.75 E3D Printer 3D The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer. This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 4 spare nozzles and 2 silicone insulators for heater block. Code I0188 Available Regular price €13.49 -€2.00 Price €11.49
Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D Hotend J Head Metal Extruder 0.3mm 1.75 Short Distance E3D features: - E3D Short Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 1.75mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0086 Available Regular price €8.95 -20% Price €7.16
Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance Hotend J Head Extruder Metal 0.3mm 3.0 Long Distance features: - E3D Long Distance Prusa 3D Printer - Nozzle: 0.3mm - Filament: 3.0mm - Cartridge heater: 12V 40W with 1m cable - Thermistor: 100K NTC 3950 ± 1% with 1m cable Code I0083 Available Regular price €7.95 -20% Price €6.36
Ceramic Heater Cartridge 12V 40W 3D Printer - Ideal for use with Reprap Prusa 3D printers & amp; Mendel, with 1m shielded cable Characteristic: - Voltage 12V - Power 40W - Material: Ceramic y Stainless steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0050 Available Price €1.79
Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm Heater Block MK8 NTC 3950 Nozzle 0.4mm 1.75mm features: - 3D Printer Extruder - 0.4mm Nozzle - 100k 3950 NTC thermistor with cable - MK8 heater block with 12v / 40W thermal ceramic resistance with cable - 1.75mm filament stud M6x30mm Code I0102 Available Price €5.49
Ceramic Heater Cartridge 24V 40W 3D Printer Characteristic: - Voltage 24V - Power 40W - Material: Ceramic and Stainless Steel - Cartridge diameter 6 mm - Cartridge length 20 mm - Cable length approx. 1000 mm Code I0051 Available Price €1.79
Filament cleaner grey - dust remover The cleaner removes dust and dirt that electrify the filament protecting the rollers, nozzles and hotend from contamination, reducing the risk of failure. The cleaner is suitable for all types of felts. Code I0015 Available Price €3.49
Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 Indirect Extruder - Bowden style MK8 Assembly for 3D Printer I0088 features: - This extruder is ready to mount and print - PC4-M6 bowden pneumatic connector - 12V 2-wire 40x40mm fan - Metal fan cover - MK8 heat sink - MK8 aluminum extruder - PAP Nema17 3.25V 1.3A motor with cable - Capable of loading with 4.48 kg / cm Code I0088 Available Price €24.90
Nozzle Throat 1.75mm 3D Printer PTFE Nozzle Throat 1.75mm 3D Printer PTFE features: - Compatible with 1.75mm filament- Inner diameter: 2 mm- Exterior: 6 mm (M6 thread)- Total length: 30 mm- Comes with Teflon PTFE core 26mm long- Outside diameter: 4 mm- Application: makerbot 3D printer extruder- Material: Stainless steel Code I0052 Available Price €1.59