Sparkfun MyoWare 2.0 Muscle Sensor Development Kit  is an all-in-one electromyography (EMG) sensor kit compatible with Arduino. Just snap on a MyoWare 2.0 Shield, add some EMG sensor pads, connect the sensor to a muscle group and flex! The kit also includes the SparkFun RedBoard Plus is an Arduino compatible board and the MyoWare 2.0 Arduino Shield to connect the MyoWare® 2.0 sensor via a cable to the Arduino.

Sparkfun sensor  MyoWare® 2.0 from Advancer Technologies is a newer version of this producer's bestseller. The MyoWare 2.0 muscle sensor included in this kit has been redesigned from the ground up with a new compact and easy-to-use design, and has been updated with the latest, most advanced chipset to improve sensor performance and reliability. In addition, MyoWare has developed a range of shields that work with the sensor (in our LED shield offering, displaying sensor readings as LED lights).

SparkFun IoT RedBoard development board compatible with Arduino. It incorporates an ESP32 chip with a 32-bit dual-core Xtensa LX6 microprocessor with a clock frequency of up to 240 MHz. It enables WiFi and Bluetooth wireless communication, making it versatile for Smart Home and IoT projects.

Power Bank 20000 mAh hasta 22,5 W Joyroom, compatible con tecnologías de carga rápida (PD, QC 3.0, AFC) El Power Bank Joyroom JR-QP192 tiene 4 puertos integrados: 1 entrada micro USB, 2 salidas USB y 1 entrada/salida USB C.

Waveshare solar panel with working voltage of 18V and output power of 10W and maximum working current of 570 mA. Includes polysilicon cells. The panel is placed in a rigid, high-strength frame.

The solar power management module is designed for 6V~24V solar panel. It can charge Li 3.7V battery through solar panel or USB connection, and provides 5V/1A regulated output.

Waveshare solar plate with the working voltage of 6V and output power of 5W and the maximum working current of 830 mA. The cell was placed in a rigid frame.

Sonoff S26R2 is the freshest version of an intelligent socket made for EU power standards. It is extremely user friendly - you only need to plug it in your socket and pair with your device and it should run! With the new version of the S26 socket, receivers with higher power consumption can now be connected - 3680W / 16A.

It is a low-power, high-sensitivity Ublox chip-based GPS receiver module that can receive 56-channel satellite signal. Compared with traditional GPS receivers, it offers much more accurate and faster positioning performance with stronger signals. Integrated with a built-in receiver antenna, this product adopts high-precision positioning chip and industrial grade manufacturing process.

This is a 7" Raspberry Pi LCD touch screen with a resolution of 800*480 and a display area of 154.8 x 85.92mm. The product is compatible with Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points. Compatible with Raspberry Pi 3B/3B+/4B.

This is a 5" Raspberry Pi LCD touch screen with a resolution of 800*480 and a display area of 108×64.8mm. The product is compatible with Raspberry Pi DSI display interface and comes with a capacitive touch panel on its screen and supports 5 touch points. Compatible with Raspberry Pi 3B/3B+/4B.

This 10.1-inch high resolution 1280*800 IPS is specifically designed as a monitor for LattePanda (which can be used as a Windows 10 on-board development), Raspberry Pi and other mini PCs. HDMI/VGA/AV interfaces ensure its wide compatibility.

This starter kit aims to quickly get you connected to Seeed Studio BeagleBone® Green. It contains 10 Grove modules and we provide you with 3 step-by-step projects to get you started quickly with all modules. The set comes in a handy box and is attractively priced!

The Grove Starter Kit for Arduino is one of the best Arduino starter kits for beginners. It includes an Arduino-compatible base shield and 14 additional Arduino sensors and accessories. With this Grove starter kit, you can create any Arduino project you want.

BeagleBone Green (102010027) is a powerful single board computer (SBC). The main change is the replacement of the HDMI interface with 2 Grove connectors. Grove is a great invention by Seeed, it is a standardised modular connector prototyping system that allows for solder- and cable-free applications. It uses the open source hardware design BeagleBone.

Microwave radar presence and motion sensor using FMCW technology, compatible with Arduino and Raspberry Pi.

Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins.  Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules.

Arduino compatible analog TDS (Total Dissolved Solids) sensor to measure water hardness, water purity. It can be used to test water quality in domestic, hydroponic and other applications. Measures TDS from 0 ppm to 1000 ppm. Power supply from 3.3V to 5.5V.

FireBeetle 2 ESP32, specially designed for IoT, is a main controller board based on ESP-WROOM-32D with dual-core chips. The FireBeetle microcontroller is compatible with Arduino Uno. It integrates the ESP-WROOM-32 dual-core module, which supports MCU, WiFi and Bluetooth communication.

Gravity: Starter Kit for Arduino is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform. The Gravity Kit presented here is equipped with numerous electronic components, such as a motherboard that works with the Arduino Uno - DFRduino Uno v3. DFRobot Gravity IO Expansion shield for Arduino is enclosed as well.

The Arduino Engineering Kit Rev 2 is a versatile and practical learning tool. By creating fun, real-world projects, you can understand basic engineering and mechatronics concepts and learn to program in MATLAB and Simulink. The versatility of the elements gives you the opportunity to adapt the content and create your own curriculum based on it. The kit includes online courseware, step-by-step instructions, lessons and exercises. It works best when studying in small groups.

NVIDIA® Jetson Nano ™ Developer Kit is a small computer with powerful capabilities that allows you to run multiple neural networks in parallel for applications such as image classification, segmentation, speech processing and object detection. All this in an easy-to-use platform that runs on just 5 watts. Thanks to this board, the power of modern Artificial Intelligence is now available to Makers, students and embedded developers everywhere. Discover the power of AI and robotics with the powerful 4GB NVIDIA Jetson Nano Developer Kit. Now educators, students, and any enthusiast can easily perform AI projects quickly and efficiently using their GPU-accelerated NVIDIA software.

The device absorbs the fumes generated during welding. Ideal equipment for school workshops, workplaces that use welders, eliminates the noxious fumes generated during work, which directly affect health, safety and comfort.

Multi-range switching power supply with output voltage regulation. It can generate output voltages of the following values: 3.0, 4.5, 6.0, 7.5, 9.0 or 12V.

Raspberry Pi Zero W is a super small computer. This version includes WIFI, Bluetooth BLE 4.1 Pi Zero is the heart of a Raspberry Pi on a small 65mm x 30mm board. With mini-HDMI, micro-B OTG USB, and the same 40-pin GPIO, it still has a great connectivity. Raspberry Pi Zero 512MB RAM WIFI BLE 4.1. Supplied with a GPIO soldered connector.

The reComputer J101 carrier board  is an NVIDIA Jetson Nano compatible support board, rich in cost and interface. It includes HDMI2.0, 2x USB 2.0, 1x USB 3.0, micro SD card slot, 2 xCSI, M.2 key E WIFI / BT, GPIO, I2C, I2S, Fan, and other rich peripheral interfaces. It has almost the same functional design and exactly the same size as the NVIDIA® Jetson Nano™ B01 Developer Kit carrier card.

NVIDIA Jetson Nano Module (B01), Production-Ready AI System On Module (SOM), 4GB 64-bit LPDDR4 with 16GB EMMC Flash.

The Pico Explorer Base is an expansion board for the Raspberry Pi Pico, designed to teach circuit properties and allow you to perform science experiments, build small robots and inventions. The board includes functional components such as a mini prototyping board, motor drivers, ADC and GPIO cables, a speaker, a display with four usable buttons, switches and Breakout Garden rails for the expansion module.

The 17 x 7 rectangular matrix has a total of 119 white LEDs that can be controlled individually. A dedicated extension to the Raspberry Pi Pico. The device uses the 12C bus for communication and can be safely powered via the USB port.

Can't stand to run out of pins in your Raspberry Pi? You have a cool new accessory but there's no way to plug it in? If you answered yes to any of the above, then this pHAT could be just for you. This piece has 6 sets of 40 GPIOS - one for your Pi and the rest (5) for your collection of HATs that you might want to plug in at the same time. Use it for a specific project or just to play with several HATs at once.  

ESP32-S3-DevKitC-1-N8R8 general-purpose development board based on the ESP32-S3R8-WROOM-1 chip, Flash 8MB, PSRAM 8MB.

This BeagleBone® development board is a powerful single board computer (SBC) Open source hardware design.

Seeed Studio BeagleBone® Green Wireless Development Board(TI AM335x WiFi+BT)

ESP32-S3-DevKitC-1-N8R2 general-purpose development board based on the ESP32-S3R2-WROOM-1 chip, Flash 8MB, PSRAM 2MB.

Third hand stand with LED lamp and crocodile clips. It has a backlight with 5 bright LEDs and two additional mini-lights.

A set of tools to facilitate soldering and other precision installation and electronic work. The base includes a sponge for cleaning the tip and a robust soldering iron holder. Two 'crocodile' holders and a wide magnifying glass with illumination are also available for use. 

With the logic signal state tester it is possible to detect 0, 1, high impedance states. The indication reading is displayed by means of LEDs. The supply voltage is 5-15V.

Sonoff S-Mate works as a three-channel remote control, a transmitter that works with the Mini R3. Smart lights are disconnected when the switch is off? No neutral wire in the mounting box? Now S-MATE can help you solve this problem.

Smart lights are disconnected when the switch is off? No neutral wire in the mounting box? Now, S-MATE can help you solve this problem.

Sonoff Mini R3 - Wifi relay operated via the EweLink app, in combination with the S-Mate module can be used in installations without N-line

Samsung Li-Ion battery without protection with nominal capacity of 2850mAh and nominal voltage of 3.65V.

Samsung Li-Ion battery without protection with nominal capacity of 3500mAh and nominal voltage of 3.6V.

Male jack connectors (2.1mm internal and 5.5mm external)  for powering devices such as 12V/ 24V LED strips, CCTV (Cameras), Arduino.  Easy to install, quick connector without screw - Quick Wire Connector.

TinyS3 is the latest in Unexpected Maker's popular range of "Tiny" development boards. It's packed with amazing features and peripherals, wireless connectivity, and stacks of Flash and PSRAM, all in the same tiny package size as the original TinyPICO!

The UT-07B-EU tester indicates the correct connection of L, N, PE cables in a socket. It also has a function to check the efficiency of residual current devices (RCD). The device is made of resistant plastic, which is very useful during installation work and ensures long-lasting correct operation. Attention! The RCD check is only possible if the phase is on the right-hand side.

The digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, with overload protection, high reliability, high safety and high accuracy. These meters can be used to measure high voltage frequency, AC/DC current, etc.

UT363S mini wind speed and temperature meters. UT363S measures wind speeds up to 30 m/s (108 km/h) with an accuracy of 0.01. The following units of measurement are available: m/s, km/h, ft/min, knots, mph.

UT363 mini wind speed and temperature meters. UT363 measures wind speeds up to 30 m/s (108 km/h)

The UT333S is a digital temperature and humidity meter with stable, safe and reliable performance in a split design. The split design is ideal for monitoring small and difficult to access air ducts. Measure temperature and humidity in real time with the best UNIT technology!

Ambient light sensor meter, with a measuring range of 0-199990 Lux. Widely used in agriculture, laboratories, offices and more industrial sectors.

Do you want a faster way to control your SONOFF devices?  Now we have a solution for you. Tap the NFC tag with your phone to easily turn on the lights. You can use an NFC tag to control your SONOFF devices in a scene. Each NFC tag can be set to a smart scene. Peel off the NFC tag and stick it on the wall.  You can easily take it with you and use it wherever you want, or stick it on the wall so you can see it at a glance.

Yellow LED indicator light for machinery lights.