SparkFun Qwiic Shield for Teensy

It's a tiny board, programmable from the Arduino IDE, that hides enormous potential. The Teensy 4.0 is equipped with a 32-bit ARM Cortex-M7 processor at a blazingly fast 600 MHz. The use of the NXP iMXRT1062 chip makes the Teensy 4.0 the fastest microcontroller on the market at launch. 

CPU Model: Allwinner H5
Number of Cores: 64-bit Quad-Core
Frequency:4* Cortex-A53 1.5GHz Memroy RAM: 1GB DDR3 Storage eMMC: 8GB
MicroSD Slot: MicroSD*1 for external storage up to 128GB Connectivity Ethernet: Gbps Ethernet, RTL8211E-VB-CG chip
WiFi: 802.11b/g/n
Bluetooth: 4.0 dual mode
Antenna: IPX Connector*1 Audio Input/Output: 2.0mm pitch 5 pin-header USB USB 2.0*1: USB 2.0 Host Type A
USB pin header*2
MicroUSB*1: Power input(5V/2A) Pin-header GPIO 1: 24Pin, 2.54mm pitch double-row pin-header containing UART, SPI, I2C and IO GPIO 2:
12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO Serial Debug Port: 2.54mm pitch 4pin-header Button Power Key*1
Reset Key*1
MASKROM(BOOT) Key*1

This development board is specially designed to work with the Bare conductive Electric Paint, which makes it possible to convert touch into sound, light or any action you want. With its 12 capacitive electrodes you can create a multitude of innovative projects and scenes, combining them with the Electric Paint. It has an MP3 decoder and a MIDI synthesizer, as well as a 3.5 mm audio connector and support for micoSD cards (includes 128 MB microSD). It is based on the Arduino Leonardo and uses the ATmega32U4, which works at 16MHz and 5V. 

Do projects on touch and interactive proximity detection in a different and simple way thanks to this Touch Board.

This product is a ZQ28335 development chart for learning including a TMS320F28335 processor with very broad features:. DSP Learning Board ZQ28335 DSP28335 Microprocessor TMS320F28335 features:
- Main processor TMS320F28335 32-bit digital high-speed floating point processor, the maximum working frequency is 150 MHz
- Memory on the chip: FLASH: 256Kx16 bit; SRAM: 34Kx16bit; Boot ROM: 8Kx16bit; OTP ROM: 1Kx16bit
- Peripherals on the chip: ePWM (improved PWM version): 12 tracks; HRPWM (high resolution PWM): 6 tracks; EQEP (enhanced version orthogonal coding pulse unit): 2 channels; ADC: 2X8 channels, 12 bits, 80 ns conversion time, 0 ~ 3V range

This BeagleBone® development board is a powerful single board computer (SBC) Open source hardware design.

Seeed Studio BeagleBone® Green Wireless Development Board(TI AM335x WiFi+BT)

The reComputer J101 carrier board  is an NVIDIA Jetson Nano compatible support board, rich in cost and interface. It includes HDMI2.0, 2x USB 2.0, 1x USB 3.0, micro SD card slot, 2 xCSI, M.2 key E WIFI / BT, GPIO, I2C, I2S, Fan, and other rich peripheral interfaces. It has almost the same functional design and exactly the same size as the NVIDIA® Jetson Nano™ B01 Developer Kit carrier card.

It is a low-power, high-sensitivity Ublox chip-based GPS receiver module that can receive 56-channel satellite signal. Compared with traditional GPS receivers, it offers much more accurate and faster positioning performance with stronger signals. Integrated with a built-in receiver antenna, this product adopts high-precision positioning chip and industrial grade manufacturing process.

Adafruit's Feather meets Raspberry Pi's new RP2040 chip, offering this board with great features. This Feather features the RP2040 and all the niceties you know and love from Feather. It comes fully assembled and tested, with the UF2 USB bootloader. It also comes with a header, so you can solder it and connect it to a solderless test board. 

This one is a classic! Hardkernel, company of the fathers of well-known ODROID microcomputers, has hit the sweet spot with this old-school GameBoy emulator. Design your own games and improve the existing ones with only Arduino IDE knowledge!

The re_computer box is specially designed for the re_computer system, but is fully compatible with all popular single board computers (SBC). Its stackable structure allows for endless possibilities, and it also comes with a removable acrylic cover on top.

The design has been prepared and left the screw holes for the installation of the most commercial boards, including the new ODYSSEY - X86J4105, Raspberry Pi, BeagleBone and Jetson Nano.

ODYSSEY - X86J4105800 Mini PC Win10 Mas expandible (Linux y Arduino Core) con 8GB RAM. ODYSSEY le permite crear aplicaciones de Edge Computing con una CPU potente e interfaces de comunicación enriquecidas. Basado en Intel Celeron J4105, es una CPU de cuatro núcleos a 1.5GHz que se dispara hasta 2.5GHz. También hay un ATSAMD21 Core integrado, un ARM Cortex-M0 + MCU que le permite programar Arduino en la plataforma x86. Versión no activada sin eMMC. También obtenga el estuche re_computer, que no solo es compatible con ODYSSEY - X86J4105 sino también con todos los SBC populares.