Batteries

Rechargeable battery XTAR 18650 2200mAh Li-ion features:
- With PCB protection circuit that protects the battery against overcharges and over discharges, increasing battery life
- Quantity: 1 unit
- Authentic Protection Battery

Lithium Battery 3V CR2032 Button with PCB Pins features:
- 3V battery for horizontal mounting PCB printed circuit
- Quantity: 1 unit
- Diameter: 20mm
- Voltage: 3V
- Capacity: 220mAh

Battery 9V/E Block Varta Industrial 4022 6F22 6LR61 580mAh features:
- 9V Varta Industrial 6F22 Battery
- High quality, made in Germany
- Quantity: 1 unit

Characteristic:
- For long periods of storage it must be stored below 45 ° C
- After periods of Long storage will probably need to do a few charge cycles to increase capacity again
- Quantity: 1 unit
Precautions:
No Change polarity.
Do not heat the battery, or expose it to high temperatures.
Do not wet or expose to high humidity environments.

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 2600mAh (discharge of 0.2C, 2.75V)
- Minimum capacity: 2550mAh (0.2C, 2.75V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.63V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1300mA, fast charge: 2600mA
- Charging time: standard charge: 3 hours, fast charge: 2.5 hours
- Max. Charging current: 2600mA (ambient temperature 25 °)
- Max. Discharge current: 5200mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.75V
- Cell weight: 47.0g maximum
- Cell dimension: Height: 65.00 mm max., Diameter: 18.40 mm max.

Rechargeable Battery XTAR 18650 2600mAh Li-ion features:
- With PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life
- Quantity: 1 unit

Panasonic rechargeable battery NCR18650B 3400mAh Li-ion 3,6V features:
- Nominal capacity: 3350mAh (0.2C, 2.5V discharge)
- Minimum capacity: 3250mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: CC-CV (constant voltage with limited current )
- Charging current: standard charge: 1625mA,
- Charging time: standard charge: 4 hours,
- Max. Discharge current: 6500 mA (ambient temperature 25 °)
- Discharge cut-off voltage: 2.5V
- Cell weight: 47.5g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum
- Operating temperature: charge: 0 to 45 ° C, discharge: -20 to 60 ° C

Rechargeable Battery Samsung INR18650 2500mAh Li-ion 3.7V 20A unprotected features:
IMPORTANT: This battery does not have a protection circuit.
Use it at your own risk.
Do not charge over 4.2V
Do not discharge below 3V
Do not change polarity
Do not heat the battery, or expose it to high temperatures
Do not wet or expose to environments of High humidity
For long periods of storage it should be stored below 45 ° C
After long periods of storage you will probably need to do some charging cycles to increase the capacity again.
Quantity: 1 unit
Nominal capacity: 2500mAh (0.2C, 2.75V discharge)
Minimum capacity: 2450mAh (0.2C, 2.75V discharge)
Charging voltage: 4.2 ± 0.05 V

Battery Varta Industrial AA - 4006 LR06 Mignon 1,5V- pack 4unds features:
- 1.5V Varta Industrial LR06 Battery
- High quality, made in Germany
- Quantity: 4 units

The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use.

Characteristic: - Lithium Battery WITHOUT Protection
- Nominal capacity: 3450mAh (0.2C, discharge of 2.5V)
- Minimum capacity: 3350mAh (0.2C, 2.5V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.6V
- Charging method: DC-CV (constant voltage with current limited)
- Charging current: standard charge: 1675mA,
- Max. Discharge current: 10A (ambient temperature 25 °)
- Charging time: standard charge: 4 hours,
- Discharge cut-off voltage: 2.5V
- Cell weight: 47g maximum
- Cell dimension: Height: 65.30 mm maximum, Diameter: 18.50 mm maximum

3V CR1220 button lithium battery features:
- 3V battery
- Diameter: 12.5mm
- Voltage: 3V
- Capacity: 45mAh
- Quantity: 1 unit

Battery charger for 12V gel batteries with battery state of charge monitoring. Alligator clip connectors.

4x everActive R6 / AA 2000 mAh Ni-MH 1.2V rechargeable batteries features:
- Batteries in Blister
- Nominal capacity: 2000mAh
- Minimum capacity: 1900mAh - Nominal voltage: 1.2V
- Cell dimension: Height: 50.50 mm max
- Diameter: 14.50 mm max

Battery charger for 12V gel batteries with battery state of charge monitoring. Alligator clip connectors.

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life Rechargeable battery XTAR 18650 3500mAh Li-ion features:
- the cell used: Panasonic-Sanyo
- capacity: 3500mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.6A
- recommended maximum discharge current 10A - maximum charging voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm - weight 48.5g - quantity: 1 unit

LITHIUM POLYMER BATTERY Battery LIPO 180mAh 3.7V features:
-Battery type-lithium polymer. -Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 180 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit Dimensions: -Length / depth of the battery- 20 mm -Battery width / diameter -31 mm It has three cables with a 3-pin connector with a separation of 2 mm. Wires: Red: positive. Black: negative. Yellow: thermistor output. The technical file: Battery LIPO.pdf

The Konnwei KW510 is an advanced multi-function device that uses state-of-the-art technology to allow you to easily, quickly and accurately measure the actual cold start capability, battery condition and common faults in the vehicle's starting and charging systems. The KW510 is particularly useful for workshops as it can accurately detect the problem, allowing the vehicle to be repaired quickly.

LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Konnwei's KW870 car battery tester is capable of effectively analysing and reading important car data such as voltage, internal resistance, cold start current and AH capacity. In addition, the device calculates cold-start capacity and the degree of ageing, allowing for faster and more accurate repairs. Whether you're a beginner or an expert, this car battery diagnostic device can be used with a wide range of 6-18 V batteries with a capacity of 100-2000 CCA, including traditional, flat AGM, spiral AGM and gel batteries.

LITHIUM POLYMER BATTERY Battery LIPO 210mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 210 mAh. - Embedded PCM security chip (protection against overcharging, over discharge, short circuit) Dimensions: -Length / depth of battery- 25mm -Battery width / diameter- 31 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 2650mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2650 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 71 mm -Width / diameter of the battery- 95 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

LITHIUM POLYMER BATTERY Battery LIPO 2800mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2800 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 78 mm -Width / diameter of the battery- 100 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Specifications: Voltage: 6V
Capacity: 4.5Ah
Dimension
- length: 70mm
- width: 48mm
- height: 100mm
- total height (with terminals): 106mm
Weight: 0.71 kg Gel Battery 6V 4.5Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current:

Specifications: Voltage: 6V
Capacity: 3.3Ah
Dimension
- length: 134mm
- width: 34mm
- height: 60mm
- total height (with terminals): 67mm
Weight: 0.69 kg Gel Battery 6V 3.3Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current: - 0 ºC: 85%
- -15 ºC: 62%
Self discharge (25 ºC)
- capacity after 3 months of storage: 91%
- capacity after 6 months storage: 82%
- capacity after 12 months storage: 64%

Specifications: Voltage: 6V Capacity: 1.3Ah Dimension
- length: 96mm - width: 24mm
- height: 51mm
- total height (with terminals): 58mm
Weight: 0.31 kg Gel Battery 6V 1.3Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current: Capacity (25 ºC)
- 20 hour rate: 1.30Ah
- 10 hour rate: 1.24Ah
- 5 hour rate: 1.09Ah
- Rate 1 hour: 0.78Ah
Internal resistance (full charged battery, degree 25 ºC): 36 mOhm
Capacity affected by temperature
- 40 ºC: 102%
- 25 ºC: 100%
- 0 ºC: 85%
- -15 ºC: 62%
Self-discharge (25 ºC)

Lead-acid battery made of AGM (Absorbent Glass Mat). Lead plates and high-quality electrolyte ensure the reliability of the power supply voltages that support most systems, such as UPS and emergency power systems.
Application: Alarm systems Cable television systems Telecommunications equipment Monitoring equipment Protection systems Medical equipment Ups Emergency Power Supply Toys
General Gel Battery 12V 2.3Ah Xtreme features:
Maintenance-free Design prevents leaks Watertight case Explosion safety valve protection High quality and reliability Extremely strong capacity recovery property Low self-discharge characteristics Can be installed in multiple positions

The batteries are manufactured on a modern production line. They have a gel-shaped electrolyte, so they are maintenance-free batteries. The batteries are designed to function as both shock absorbers and cyclic. They are characterized by their durability and a very favorable price-performance ratio. Gel Battery 12V 2.3Ah features:
> Long service life - both on the job and on the cyclic damper. No delamination effect of gelled electrolyte. Tolerates high operating temperatures. Fully returns to initial deep discharge volume. Very high performance. Capacity (Ah): 2,3 Nominal voltage (V): 12 LxAnxAl dimensions (mm): 177x33x60 Gross weight: 0.96

The batteries are manufactured on a modern production line. They have a gel-shaped electrolyte, so they are maintenance-free batteries. They are characterized by their durability and a very favorable value for money. Gel Battery 12V 0.8Ah features:
Long service life-both on the job and on the cyclic damper. No delamination effect of gelled electrolyte. Tolerates high operating temperatures. Fully returns to initial deep discharge volume. Very high performance. Capacity (Ah): 0.8 Tensi Nominal ion (V): 12 LxAnxAl dimensions (mm): 96x28x61 Gross weight (kg): 0.32

Rechargeable battery 9V 6F22 Ni-MH 250 mAh Ready to Use features:

The battery with PCB protection circuit that protects the battery against overcharges and over-discharges, increasing battery life Rechargeable battery XTAR 18650 3000mAh Li-ion features:
- the cell used: Panasonic-Sanyo
- capacity: 3000mAh
- nominal voltage 3.6V
- recommended maximum charge current 1.5A
- recommended maximum discharge current 4.5A
- maximum charge voltage 4.25V
- dimensions:
diameter: 18.40mm ± 0.3mm | height: 68.80mm ± 0.5mm - weight 48.5g - quantity: 1 unit

Lithium polymer battery 3.7 V with the capacity of 590 mAh. Includes PCM safety chip (protection against overcharge, over-discharge, short circuit).

Battery terminal type-3 wires.

Battery voltage-3.7 V

Battery capacity- 590 mAh.

Gel Battery 12V 7Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge

Gel Battery 6V 4Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge

Gel Battery 12V 1.2Ah features:

• Long service life - both in cyclic and buffer operation
• No delamination effect from the gelled electrolyte
• It tolerates high operating temperatures well
• It fully recovers to its original capacity from deep discharge

Nickel strip in the shape of a square plate to join 4 poles of 4 welded batteries with connection projection. Tape sheets, lithium battery welding.

Nickel tape to join the battery poles welded with connection projection. A roll of 1kg / 260m.

Nickel tape to join the battery poles welded with connection projection. A roll of 1kg / 105m.

20 meter wide shrink film for one 18650 stack to wrap

20 meter wide shrink film for two 18650 stack to wrap

Single sheet of two 18650 stack width shrink film for wrapping.

Pre-cut insulating base for electrode, base without holes for 2x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base without holes for 3x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base without holes for 5x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base without holes for 4x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base without holes for 8x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package.

Pre-cut insulating base for electrode, base with holes for 2x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package. If the connecting tape becomes hot, insulation protects the battery against damage to the casing and against short circuits.

Pre-cut insulating base for electrode, base with holes for 4x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package. If the connecting tape becomes hot, insulation protects the battery against damage to the casing and against short circuits.

Pre-cut insulating base for electrode, base with holes for 4x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package. If the connecting tape becomes hot, insulation protects the battery against damage to the casing and against short circuits.

Pre-cut insulating base for electrode, base with holes for 5x 18650 batteries. Self-adhesive pad isolates and protects battery contacts from short circuits. Stick to the battery after sealing it in a package. If the connecting tape becomes hot, insulation protects the battery against damage to the casing and against short circuits.

The 12V gel battery with the capacity of 18Ahs. It maintains the capacity after 3 months of storage at 91%. Long life, both in cyclic and buffer operation. No delamination effect of the gelled electrolyte. Tolerates high operating temperatures well. Completely recovers to its original capacity after a deep discharge.

The 12V gel battery with the capacity of 4,5Ahs. It maintains the capacity after 3 months of storage at 91%. Long life, both in cyclic and buffer operation. No delamination effect of the gelled electrolyte. Tolerates high operating temperatures well. Completely recovers to its original capacity after a deep discharge.

LITHIUM POLYMER BATTERY Battery LIPO 190mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 190 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 33 mm -Battery width / diameter- 44 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Voltage: 6V

Capacity: 6.6Ah

Dimension: 150x34x93

- length: 150mm

- width: 34mm

- Height: 93mm

Weight: 1.04 kg

Voltage: 6V

Capacity: 7Ah

Dimension: 150x34x93

- length: 150mm

- width: 34mm

- height: 93mm

Weight: 1,08 kg

Voltage: 6V

Capacity: 7Ah

Dimension: 150x34x93

- length: 150mm

- width: 34mm

- height: 93mm

Weight: 1,08 kg

Voltage: 6V

Capacity: 6Ah

Dimension: 150x34x93

- length: 150mm

- width: 34mm

- height: 93mm

Weight: 1,08 kg

LITHIUM POLYMER BATTERY Battery LIPO 1520mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 cables. -Voltage of the battery-3.7 V -Capacity of the battery- 1520 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Battery length / depth- 51 mm -Battery width / diameter- 34mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Lithium polymer battery 3.7 V with the capacity of 2800 mAh. Includes PCM safety chip (protection against overcharge, over-discharge, short circuit).