Rechargeable Battery Sanyo NCR18650GA 3450mAh Li-ion 3,6V 10A

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of tension.
LM2596 DC Voltmeter Converter 3A Step Down Adjustable Power features:
- Input voltage: 4.5-38V
- Output voltage: 1.25-36.5V
- Current output: 2A (max 3A with heat sink)
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 150KHz
- Efficiency conversion: up to 92%
- Load Regulation: +/- 0.5%
- Voltage Regulation: +/- 2.5%
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Voltmeter up to 40V, remember to set the input voltage to 4.5V

Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.25mm features:
- 100gr. 0.25mm diameter welding wire. 60% tin and 40% lead
- Fusing temperature 183 „ƒ / 190 „ƒ
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

6 DIP pins and 2 positions DPDT. This switch is widely used to control the operation of many small electronic power projects, including volume and other controls for audio video, dimmer controls for lights.
It is also a great component for DIY. Vertical Slide Switch 3P2T 50V 0.5A features:
- Type: 3P2T
- Contact resistance: 30 MΩ max.
- Insulation resistance: 100 MΩ
- Maximum operating voltage: 50V
- Maximum operating current: 0.5A
- Can support 500 VAC for 1 minute
- Step between pins: 2.54mm / 0.1 "
- Pin size: 4.5x0.5x15 / 0.77 "x0.19"
- Type of current: DC
- Pins to be welded
- Switch action: 2 ON / OFF positions
- Shape of interrupter: rectangular
- Size: 16x6.5x15 / 0.2 "x0.02"

CNC shield for arduino works as a controller for CNC type milling machines,
3D printers, laser cutters .
CNC Shield Expansion Plate V3 Engraver 3D Printer features:

• 4 compatible sockets for use of A4988 stepper motor controllers (PAP), DRV8825, other compatible
• 4 support axes X, Y, Z, A
• 2 limit switches for each axis (6 in total)

This USB mobile solar charger automatically identifies all smartphones. Its 5V - 2A output is constant. Restarting is automatic after the sun has been weaker.
Compatible with most smartphones, tablets, ipad, digital cameras, etc ... Solar charger USB DC mobile power supply features:
- Operating temperature: -40 ° C - 85 ° C
- Input voltage: 3.6 - 20 VDC
- Output voltage: 5 VDC
- Output current: 2A
- Conversion efficiency: 95%
- Size: 30x25x117 mm

Ideal for 1.75mm filament.
The tube is cut in lengths from 1m to 10m. PTFE Tubing ideal for feeding 1.75mm filament into an extruder or for use as a bowden tube.
Tubing cut to lengths of 1/2/3/4 / 5..10metres.

Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.
DS18B20 Submersible Probe Sensor Temperature features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Red Vcc
      - Yellow digital output
- Inocidable steel
- Cable length: 1m

Cable chain 15x20 1m for CNC 3D printer features:
- Suitable for movements where cable displacement or twisting is needed, where cable protection is needed - Easy for installation And maintenance; Low noise, high speed wear resistant movement - The cable structure has been widely used in CNC machine tools, electronic equipment, fire fighting machinery and equipment, stone machinery, machinery glass, doors and windows of machines, injection molding machines, robots, overweight transport equipment, automated warehouses. - Internal widths 15x20mm
- External measurement 20x28mm
- Material: reinforced series polyamide
- Length: 1m
- Quantity: 1 unit