USB rechargeable battery 16340 CR123A Li-Ion
  • USB rechargeable battery 16340 CR123A Li-Ion
  • USB rechargeable battery 16340 CR123A Li-Ion
  • USB rechargeable battery 16340 CR123A Li-Ion
  • USB rechargeable battery 16340 CR123A Li-Ion

USB rechargeable battery 16340 CR123A Li-Ion

PP123

The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use.

Ansmann
Add to wish list

The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use.

Features :

  • Equivalent to CR123A - but rechargeable with a lithium-ion charger or via micro-USB
  • Charge status LED on the battery positive pole
  • With a very low self-discharge, the battery holds its charge for a long time, even when not in use. 
  • The power to weight ratio is much better than that of other battery technologies (e.g. NiCD/NiMH/PB), being the 
  • Lithium is much lighter. 
  • Ideal in modern devices such as LED torches, headlamps, electronic cigarettes, laser pens, etc.
  • The high capacity of 850 mAh is perfect for use in high power devices.
  • Can be used in a wide temperature range from -20°C to +60°C.
  • The integrated safety plate makes this battery slightly larger than the 16340 internal - 17350 (approx. 17x35mm).

Specification :

  • Battery Voltage: 3.6V
  • Battery Technology: Lithium Ion
  • Battery Capacity: 850mAh
  • Battery Terminals: High Positive and Flat Negative
  • External Diameter: 17mm
  • External Height: 35mm
  • Pack Quantity: 1
  • Weight: 17g

Interesting links :

Customers who bought this product also bought

DHT11 Module Temperature and Humidity Sensor

The DHT11 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement.
Characteristic:
- Operating voltage: 3 to 5 VDC - Humidity measurement range: 20-95% ± 5% accuracy
- Temperature measurement range: 0ºC to 50ºC ± 2º accuracy
- Maximum sampling rate: 2 seconds - Working current 2.5mA
- 1-wire interface
- Dimensions: 32 x14 mm
- Quantity: 1 unit with 3x female / female cables

S0001

Price €2.47

GY-91 10DOF 4 Sensors in 1 Module with MPU-9250 and BMP280

This small 10-DOF sensor module GY-91 is more compact than the GY-80 module.
The module uses a unique MPU-9250 chip combination with built-in 3-axis gyroscope, 3-axis accelerometer, digital compass and BMP280 enhanced barometric pressure sensor.
The MPU-9250, delivered in a 3x3x1mm QFN package, is the smallest 9-axis MotionTracking device in the world and incorporates the latest InvenSense design innovations, allowing dramatically reduced chip size and power consumption, while improving the performance and the cost. Enhancements include low-power accelerometer mode support with only 6.4μA of and provides improved 16-bit compass data resolution (0.15 μT per LSB).

M0079

Price €13.18

Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible

Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features:
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2400 ~ 2500MHz
- Interface: SMA
- Gain: 3dBi
- Length of the antenna: 10cm
- V.S.W.R.: <1.5
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

W0070

Price €3.72

Solar Panel 6V 5W

Waveshare solar plate with the working voltage of 6V and output power of 5W and the maximum working current of 830 mA. The cell was placed in a rigid frame.

WV001

Price €16.49

BMP280 Temperature Barometric Pressure Sensor Module/SPI

This module includes the BMP280 component that converts atmospheric pressure, temperature and humidity with high precision into a digital signal.
The equipment uses the two I2C and SPI interfaces. The very good measurements made by the BMP280 allows the module to be used as an altimeter.
Its 5-pin straight connector allows easy connection to other electronic boards. BMP280 Temperature Barometric Pressure Sensor Module/SPI features:
- Interfaces:
       -I2C (up to 3.4 MHz)
       -SPI (up to 10 MHz)
- Supply voltage: 1.8-5VDC
- Module operating range:
       - Temperature: -40ºC to + 85ºC
0-100%
       - Pressure: 300-1100 hPa
- Resolution of the measures:
       - Temperature: 0.01ºC

M0134

Regular price €4.12 -€1.00 Price €3.12
€21.90
Save €2.00 €19.90

19,90 tax excl.

1
Last 2 items
Regular price €21.90 Price €19.90

Order until 4pm we will send today
30 days return