Battery LIPO 2800mAh 3.7V
  • Battery LIPO 2800mAh 3.7V

Battery LIPO 2800mAh 3.7V

PP042

LITHIUM POLYMER BATTERY Battery LIPO 2800mAh 3.7V features:
-Battery type-lithium polymer. - Type of battery terminals- 3 wires. -Voltage of the battery-3.7 V -Capacity of the battery- 2800 mAh. - Embedded PCM security chip (protection against overload, over discharge, short circuit). Dimensions: -Length / depth of the battery- 78 mm -Width / diameter of the battery- 100 mm It has three cables with a 3-pin connector with a separation of 2 mm. Cables: Red: positive. Black: negative. Yellow: thermistor output.

Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

LITHIUM POLYMER BATTERY

Battery LIPO 2800mAh 3.7V features:

-Battery type-lithium polymer.

- Type of battery terminals- 3 wires.

-Voltage of the battery-3.7 V

-Capacity of the battery- 2800 mAh.

- Embedded PCM security chip (protection against overload, over discharge, short circuit).

Dimensions

-Length / depth of the battery- 78 mm

-Width / diameter of the battery- 100 mm

It has three cables with a 3-pin connector with a separation of 2 mm.

Cables:

Red: positive.

Black: negative.

Yellow: thermistor output.

Customers who bought this product also bought

Development Board Ra-02 LoRa SX1278 Ra-02 Module (433MHz) Long range

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

W0108

Price €8.99

Gravity: I2C BME280 Environmental Sensor

The BME280 is an environmental sensor (SEN0236) integrating a temperature sensor, a humidity sensor and a barometer. Powered from 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 0 %RH to 100 %RH, pressure: 300 hPa to 1100 hPa.

DF017

Price €19.95

Full Color SMD LED Module RGB KY-009

This module specially designed for Arduino will allow you to generate a light of any color (RGB) quickly and accurately.
The SMD LED Module RGB, consisting of an LED capable of creating any color using RGB, has a PWM voltage input with three pins.
These are capable of shining in a wide range of colors thanks to the mixture of the three primary colors (red , green and blue). These types of diodes are called RGB and are made up of three red, green and blue diodes in the same package.
Thanks to the variation of the intensity of these three diodes, we can create a composition of colors. With this led you can handle more than 16.5 million colors.

M0080

Price €2.95

6V 4.5W DIY Solar Panel

6V 4.5W DIY Solar Panel features:
- Mobile DIY System Photovoltaic Charger Cell
-Work Voltage: 6V
-Power output: 4.5W
-Working current: 0-750mA
-Product size: 165x165x3 mm

A0063

Price €12.89

Led Matrix 8x8 MAX7219 Soldier

Led Matrix 8x8 MAX7219 Soldier features:
- MAX7219 controller module with 8x8 led matrix + cables
- 8X8 LED matrix controlled by MAX7219 chip
- Led 3mm red color
- SPI communication
- Voltage: 4.7 - 5.3V DC
- Interfaces to manage multiple modules in cascade
- Matrix dimensions: 32mm x 32mm x 8mm
- PCB dimensions: 32mm x 50mm

M0043

Price €2.95
€11.59

9,58 tax excl.

Tax included
Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €11.59

Order until 4pm we will send today
30 days return