Gel Battery 6V 4.5Ah
  • Gel Battery 6V 4.5Ah

Gel Battery 6V 4.5Ah

PP043

Specifications: Voltage: 6V
Capacity: 4.5Ah
Dimension
- length: 70mm
- width: 48mm
- height: 100mm
- total height (with terminals): 106mm
Weight: 0.71 kg Gel Battery 6V 4.5Ah features:

"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current:

Add to wish list

Specifications:

Voltage: 6V
Capacity: 4.5Ah
Dimension
- length: 70mm
- width: 48mm
- height: 100mm
- total height (with terminals): 106mm
Weight: 0.71 kg

Gel Battery 6V 4.5Ah features:



"Standby" mode (25 ºC): 6.8-6.9V
Cyclical work (25 ºC): 7.25-7.45V
Maximum starting current: <1.35A
Capacity (25 ºC)
- 20 hour rate: 4.50Ah
- 10 hour rate: 4.28Ah
- 5 hour rate: 3.78Ah
- 1 hour rate: 2.70Ah
Internal resistance (full charged battery, 25 ºC): 17 mOhm
Capacity affected by temperature
- 40 ºC: 102%
- 25 ºC: 100%
- 0 ºC: 85%
- -15 ºC: 62%
Self discharge (25 ºC)
- capacity after 3 months of storage: 91%
- capacity after 6 months of storage: 82%
- capacity after 12 months of storage: 64%

Customers who bought this product also bought

Support for HC-SR04 Ultrasonic Sensor

Support for ultrasounds, HC-SR04 distance meter.
Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features:
- Material: Acrylic
- Color: transparent
- Includes screws

S0005

Regular price €1.45 -€0.50 Price €0.95

DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of voltage and current.
DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo features:
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Current output: adjustable, 4.5A (max 5A)
- Output power: 75W maximum
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 180KHz
- Efficiency conversion: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 62mm x 26mm x 14mm
Principal functions:
- Step-down converter with overcurrent protection
- Li-Po battery charger, Li-Ion

A0014

Price €3.49

25x M3x20 Nylon Round Separator Polyamide Insulators PCB

M3 made of nylon for screws and fasteners on PCB boards, model airplanes, DIY projects.
It can be used in prototyping and robotics projects. 25x M3x20 Nylon Round Separator Polyamide Insulators PCB features:
- Material PA66
- Type: female / female
- Inner diameter M3
- Length body: 20mm
- Quantity: 25 units
- Color: white

H0089

Price €0.19

Arduino compatible Nano V3.0 CH340 board

Version compatible with Arduino Nano V3.0
It has an ATMega328P chip running at 16Mhz with bootloader loaded factory.
Characteristic:
- Microcontroller: ATmega328
- Operating Voltage (logic level): 5V
- Input Voltage (recommended): 7-12V
- Digital I / O Pins: 14 (6 PWM outputs)
- Analog Inputs: 8 (A0-A7)
- DC Current per I / O pin 40 mA
- Flash memory: 32 KB (2 KB used by the bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Frequency Clock: 16 MHz
- USB Communication - CH340
- Dimensions: 18 mm x 44 mm

B0006

Price €5.50

M3x10 Nylon Hexagonal Splitter

20x M3x10 Nylon Hexagonal Splitter features:
-PA66 material
-Type: female / female
-Thread size / M3 inner diameter
-Body length: 10mm
-Quantity: 20 units
-Color: white

H0084

Price €0.29

Ceramic Capacitor 220nF 50V 224

20x Ceramic Capacitor 220nF (0,1uF) 50V 224 features:
-Type: ceramic Z5U
-Tolerance: +80 -20%
-Dimensions: diameter 9.5mm, pitch 5.08mm

Orders only in multiples of 20 units

D0058

Price €0.06

LED Diode COB 3W 3000K White SMD

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

P0144

Price €1.32

HC-SR04 Ultrasonic Sensor Distance Measuring Module

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle.
HC-SR04 Ultrasonic Sensor Distance Measuring Module features:
- Supply voltage: 5V (4.5V- 6V)
- Consumption: 30 mA typical, (35 mA max)
- Interface: VCC , GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED indicator of measurement in progress
- Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm
- Quantity: 1 unit
Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry:
Automatic robot operation with obstacle detection />

S0007

Price €1.79
€13.99
Save €3.00 €10.99

9,08 tax excl.

Tax included 1
Last 5 items
Regular price €13.99 Price €10.99

Order until 4pm we will send today
30 days return