Diodes

RGB LEDs are characterised by direct colour, good colour consistency, RGB - three colours in one package, high flux per LED, more energy efficient than incandescent and most halogen lamps, instant light (less than 100ns). 48W high power RGB LED suitable for projection lamps. Ideal for DIY projects.

LED Diode Assortment Kit 50x Red Green Yellow Blue White features:
  
- Lens color: Red, green, yellow, blue - diffuse, light white
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.0V-3.2V
- Voltage (white) 3.2V - 3.4V
- Anode (A): Positive (long leg): 17mm
- Cathode (K): Negative (shorter leg): 15 mm
- Operating temperature: -25ºC / 80ºC
- Welding temperature: + 260ºC
- Quantity: - 50 units
                  - 10x red
                  - 10x green
                  - 10x yellow
                  - 10x blue
                  - 10x white

Intelligent 5 metre LED strip by WiFi and RF, great for creating any atmosphere in any room. Change its colour and rhythm from your mobile phone or its remote control. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes.

Red Laser Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Laser type: point
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

Red LED indicator light with 20cm cable for machinery lights

Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.
Characteristic:
- Chip 28x47mil
- Voltage: 2.85-3.85V
- Current: 350mA - Luminous flux: 120-130LM
- Beam angle: 130 degrees

High power 50W LED suitable for KTV light, projection lamps.
Ideal for DIY projects.
DC 12V CPU heatsink for high power 50W LED diodes features:
- 35mm thick heat sink,
- DC 12V Ø95 x 25mm fan,
- 4 screws to fix the base carrying the LED diodes,
- Step between screws: 71.5mm,
- Includes thermal grease.

5 meter LED strip easily installed for use with Sonoff controllers via WiFi and RF. Great lights to create any ambience in any room. Change their colour and rhythm from your mobile or controller. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. (Controller and adapter not included)

Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Type of laser: cross
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

Yellow LED indicator light for machinery lights

Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white.

Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.
Characteristic:
- Chip 28x47mil
- Voltage: 3.0-3.2V
- Current: 300mA - Luminous flux: 120-130LM
- Beam angle: 130 degrees

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 2.2-2.4V
- Current: 300mA
- Luminous flux: 40-50LM
- Ã beam angle: 120 degrees
- Color emission: red

High power 50W blue LED suitable for KTV light, projection lamps.
Ideal for DIY projects.
High power 50W Blue LED diode features:
- Supply voltage: 30V - 33V
- Current: 1500mA,
- Chip type: 28x47mm,
- Material: aluminum base,
- Silver color,
- Power: 50W,
- Connector type: B22 welding,
- Type of emitter: LED,
- Total emitters: 50,
- Color BIN: blue,
- Theoretical lumens: 1500-2000 lumens
- Wavelength: 460-465 nm,
- Dimensions metal base: 51x45 mm.

The perfect solution for not worrying about the length required on your RGB LED strip, now with a WiFi driver compatible with the eWeLink APP and voice assistants like Google Home or Alexa. Also includes a 24-key IR remote control.

You will be able to turn on and control your strip lights anytime and anywhere, and control it with just a click on your smart phone or tablet via APP eWeLink, or voice assistants, without time and distance limitations.

Green LED indicator light for machinery lights

LED Diode Assortment Kit 30 pcs 5mm red, green, yellow features:
- Lens color: red, green, yellow - diffuse
- Size: 5mm
- Operating current: 20mA
- Voltage (red) 1,8V-2,3V
- Voltage (green) 3,2V-3,4V
- Voltage (yellow) 1,8V-2,3V
- Anode (A): Positive (long leg): 28mm
- Catode (K): Negative (short leg): 25mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: +260ºC
- Quantity: 30 units
*10x red
*10x green
*10x yellow

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 3.2-3.4V 
- Current: 350mA 
- Luminous flux: 100-110LM 
- Ã beam angle: 140 degrees 
- Color emission: pink

Red LED indicator light for machinery lights

LED Diode Assortment Kit 40x Red Green Yellow Blue features:
  
- Lens color: Red, green, yellow, blue -difused
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.2V-3.4V
- Anode (A): Positive (long leg): 28mm
- Cathode (K): Negative (shorter leg): 25 mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: + 260ºC
- Quantity: 40 units
      - 10x red
      - 10x green
      - 10x yellow
      - 10x blue

Red Laser Line Module Generator 650nm 5mW features:
- Type: red laser diode
- Type of laser: line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130 mm

LED 5mm RGB 4 Pins cathode commun with clear water lens.

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 70-80LM
- Ã beam angle: 120 degrees
- Color emission: green

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 2.2-2.4V
- Current: 300mA
- Luminous flux: 40-50LM
- Ã Beam angle: 120 degrees
- Color emission: yellow / orange

LED 5mm RGB 4 Pin anode commun with clear water lens.

Red Laser Cross Line Point Module Generator 650nm 50mW features:
- Type: red laser diode
- Laser type: line, cross, point
- Adjustable Focus
- Wavelength: 650nm
- Output power: 50mW
- Operating voltage: 4.5-5V
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x45mm
- Cable length: 130mm

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 20-30LM
- Ã beam angle: 120 degrees
- Color emission: blue

Red Laser Line Generator 650nm 20mW features:
- Module Focus Adjustable Laser Head 3V
- Type: Red laser diode
- Type of laser: Line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 20mW
- Operating voltage: 3V-4V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

1N4007 Rectifier Diodes 1A 1000V DO-41 features:
- Standard rectifier diode
- Configuration: Simple
- Reverse voltage: 1000V
- Direct voltage drop: 1V
- Direct direct current: 1A
- Maximum overvoltage current: 30A
- Encapsulated: DO-41
- Operational tension: -65ºC to + 125ºC

5mm multicolor LED with automatic color change. 7 different colors are emitted and the blinking is fast.

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil
- Voltage: 3.1-4.1V
- Current: 700mA
- Luminous flux: 39-55LM
- Ã beam angle: 120 degrees
- Color emission: blue

Characteristic:
- Lens color: white,
- Diameter of the bulb: 5 mm,
- Operating current: 20mA,
- Voltage: 2.0V-2.2V,
- Wavelength: 588-590 nm,
- Anode (A): Positive (long leg): 19mm,
- Cathode (K): Negative (shorter leg): 17 mm,
- Operating temperature: -25ºC / 80ºC,
- Welding temperature: + 260ºC,
- Quantity: 10 units.

This module adapted for the arduino includes a laser diode and a 3-pin connector for a simple and quick adaptation with the Arduino. The diode is mainly used for laser toys, all kinds of level meter, instruments, stylus pen, mini LCD projector, remote listeners laser, alarm anti-theft light remote control. Light shots and different display can make the color of the image element a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC
- Connector of 3 pins:
1- GND
2- VCC
3- Light control of the laser diode
- Point mode: point facula
- Continuous output
- Operating temperature: -36 ° C - + 65 ° C
- Laser wavelength: 650nm (red)

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.

Characteristic:

- Voltage: 3.2-3.6V

- Current : 700mA

- Luminous flux: 5-8LM

- Beam angle: 140 degrees

- Colour emission: Ultraviolet

This diode is mainly used for laser toys, all kinds of level meter, instruments, pointer pen, mini LCD projector, laser From remote listeners, remote control burglar alarm light.
Light shots and different display can make the color of the image item a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC
- Mode of point: facula point
- Continuous output
- Operating temperature: -36 ° C - + 65 ° C
- Laser wavelength: 650nm (red)
- Diameter copper head is 6mm
- Power cable length: 75 mm
- Cover material: Brass
- Working life: more than 2000 hours
- Light power: Less than 5mW
- Operating current: Less than 40mA

LED Diode Assortment Kit 15 pcs 5mm red, green, yellow features:
- Lens color: red, green, yellow - diffuse
- Size: 5mm
- Operating current: 20mA
- Voltage (red) 1,8V-2,3V
- Voltage (green) 3,2V-3,4V
- Voltage (yellow) 1,8V-2,3V
- Anode (A): Positive (long leg): 28mm
- Catode (K): Negative (short leg): 25mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: +260ºC
- Quantity: 30 units
*5x red
*5x green
*5x yellow

3x LED Base Plate Heat Sink 1W 3W 5W features:
- Outside diameter: 20mm
- Quantity: 3 units

Adjustable mounting bracket for laser diode that has a plate with holes to securely fix it to any surface.
It also has a screw to fix the laser diode and is adjustable in inclination, to obtain the perfect orientation of the diode. It can be used to support any object other than a laser diode that has a lower or equal diameter to the support.

2 meter LED strip easily installed for use with Sonoff controllers via WiFi and RF. Great lights to create any ambience in any room. Change their colour and rhythm from your mobile or controller. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. (Controller and adapter not included)

Through-hole LED for 12V DC with black and red 20cm cable.

• Diode type: with cable
• LED lens type: Clear
• Direct diode voltage: 12V
• LED colour: light blue
• The distinguishing feature: 12 V LED with 20 cm RoHS cable
• LED size: 3 mm

5x Power LED Aluminum Heat Sink 1W 3W features:
- Outside diameter: 36mm
- Height: 15mm
- Quantity: 5 units

Through-hole LED for 12V DC with 20cm black and red cable.

• Diode type: with cable
• LED lens type: Diffusive (matt)
• Direct diode voltage: 12V
• LED colour: Green
• The distinguishing feature: 12 V LED with 20 cm RoHS cable
• LED size: 3 mm

3x Power LED Aluminum Heat Sink 3W 5W features:
- Outside diameter: 36mm
- Height: 30mm
- Quantity: 3 units

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

Intelligent 5 metre LED strip by WiFi and Bluetooth, great for creating any atmosphere in any room. Change its colour and rhythm from your mobile phone or its remote control. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes.

Through-hole LED for 12V DC with black and red 20cm cable.

• Diode type: with cable
• LED lens type: Clear
• Direct diode voltage: 12V
• LED colour: light yellow 
• The distinguishing feature: 12 V LED with 20 cm RoHS cable
• LED size: 3 mm

Red, yellow and green LED traffic light mini kit ideal for educational and beginner Arduino projects.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

Grove module with a red LED light. Ideal for quick and easy connections thanks to the Seeed Grove connector.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tablet
The advantages of LED COB:
- A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Opening angle of up to 160º

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.
The advantages of LED COB:
- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without needing to concentrate so much the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light
Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without needing to concentrate so much the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light - Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little thermal silicone in each of the placement centers of the diodes
- The thermal paste increases the thermal transfer between the diode and the metal plate used as circuit

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

2 meter LED strip easily installed for use with Sonoff controllers via WiFi and RF. Great lights to create any ambience in any room. Change their colour and rhythm from your mobile or controller. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. (Controller and adapter not included)

The aluminium heatsink for 3W to 5W LEDs. It is 10cm long, 2.5cm wide, 1.0cm high.

Aluminum Heat Sink 15cm 2cm LED 1W 3W features:
Aluminum heatsink for LED 1W-3W, Length: 15cm, Width: 2.0cm, Height: 0.6cm.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.