40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features:
- WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually
- WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable.
- They are based on the 5050 LED
- 24-bit color control (8-bit PWM per channel)
- 16.8 millions of colors per LED
- One-wire communication
- Power: max. 5 Vdc
- Current: 18.5mA
- Input and output terminals (data and power)

RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features:
- RGB LED WS2812B
- WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual
- WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable.
- They are based on the 5050 LEDs
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors per LED
- Communication One-wire
- Power: 5 V
- Width: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
- Waterproof
- With 3M adhesive

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 70-80LM
- Ã beam angle: 120 degrees
- Color emission: green

This RGB LED strip is based on LED WS2812. It is equipped with 30 LEDs and has a length of 5 metres. You can easily control the behaviour of these LEDs using the included remote control or using your mobile phone via Bluetooth. Watch the video for more info.

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 20-30LM
- Ã beam angle: 120 degrees
- Color emission: blue

RGB LED SMD5050 WS2812B with white packaging, waterproof level IP20.
They are smart that are used to create places with decorative lighting, lighting the information screens located inside and outside facilities.
They must be integrated to be operated with the help of any type of smart strip controllers, which can be: autonomous (offline), subordinate (online), light scattering ( to create musical lights) and programmable (control). LED RGB 5050 WS2812B White features:
- Power supply: +3.7 - +5.3 VDC
- Logic input voltage: VDD-0.5～VDD + 0.5
- Operating temperature: -25 ° C - + 85 ° C
- Storage temperature: -40 ° C - + 105 ° C - 4 pins: 1- VDD: LED power supply
2- DOUT: Control data signal output
3- GND: Ground connection

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.

This chain has DC5V LEDs that have built-in logic, so it is possible to vary the colour of each LED individually.

WS2811 includes a built-in integrated inside each LED, which allows access to each pixel individually. Black background

Easy programming with Arduino, ESP32, ESP8266, etc. 

3x Power LED Aluminum Heat Sink 3W 5W features:
- Outside diameter: 36mm
- Height: 30mm
- Quantity: 3 units