Micro:bit IOBit Expansion board V1.0 IOBIT expansion board for the micro:bit minicomputer. Allows connection to all minicomputer outputs via a pin strip. Code RA135 Available Regular price €6.99 -€1.50 Price €5.49
Ceramic Capacitor 100nF 50v 104 Ceramic Capacitor 100nF (0,1uF) 50v 104 PCB PIC Arduino features: Orders only in multiples of 20 units-Type: Ceramic Y5V-Tolerance: +80/-20%-Dimensions: diameter 9.5mm, pitch 5.08mm Code D0057 Available Price €0.06
Red Laser Cross Line Point Module Generator 650nm 50mW Red Laser Cross Line Point Module Generator 650nm 50mW features: - Type: red laser diode- Laser type: line, cross, point- Adjustable Focus- Wavelength: 650nm- Output power: 50mW- Operating voltage: 4.5-5V- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x45mm- Cable length: 130mm Code M0048 Last items in stock Price €19.89
Tower Pro Micro Servo 9G SG90 pack 10pcs Pack 10pcs of micro servo 9g SG90. Code R0014 ✗ Out-of-Stock Price €24.95
Heart Rate Oximetry Sensor Module for Arduino MAX30100 This detection module that allows you to detect your heart rate and blood oxygen level from your Arduino project. You can monitor your blood oxygen level yourself to avoid going to the doctor or pharmacy on purpose. Simply press the sensor with your finger and wait for the reading of hemoglobin (Spo2), heart rate and Perfusion Index (PI%). It is a solution as an integrated heart rate sensor and pulse oximetry, which includes two LEDs, a photodetector and is optimized for analog low noise optics. Code S0148 Available Regular price €6.95 -€1.00 Price €5.95
L293D STM Module Expansion Board 2 Motors - 25V/0.6A The L293D motor controller allows you to control two DC motors or one stepper motor using Arduino kits. The system allows you to adjust the direction and rotational speed of motors with a current consumption of up to 600 mA and a supply voltage from 4.5 V to 25 V. Code M0108 Available Price €4.59
MH-Z19C Infrared Sensor module 5000ppm CO2 monitor HVAC PWM output UART CO2 sensor model MH-Z19C. High precision working voltage 5.0±0.1V DC. The measuring range is between 0 and 5000 ppm. It has a low power consumption. UART and PWM output. Code S0044 Backorder Price €29.49
Cables with Crocodile Clips pack 10pcs Include 5 different colors, 1 unit of each color.Also available in batches of 5 and 2 cables. 10x Cables 50cm with Crocodile Clips features: -Length: 50cm-Colors: red, green, white, black and yellow-Cable diameter: 1,5mm -Quantity: 10 cables Code K0013 Available Price €2.95
Red Laser Diode 650nm 5mW 6mm 5V This diode is mainly used for laser toys, all kinds of level meter, instruments, pointer pen, mini LCD projector, laser From remote listeners, remote control burglar alarm light. Light shots and different display can make the color of the image item a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC - Mode of point: facula point - Continuous output - Operating temperature: -36 ° C - + 65 ° C - Laser wavelength: 650nm (red) - Diameter copper head is 6mm - Power cable length: 75 mm - Cover material: Brass - Working life: more than 2000 hours - Light power: Less than 5mW - Operating current: Less than 40mA Code M0076 Available Price €1.19
Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features: - Type: red laser diode- Type of laser: cross- Adjustable Focus- Wavelength: 650nm- Output power: 5mW- Operating voltage: 4.5-5V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0041 Available Price €3.95
Adjustable support for laser diode Adjustable mounting bracket for laser diode that has a plate with holes to securely fix it to any surface.It also has a screw to fix the laser diode and is adjustable in inclination, to obtain the perfect orientation of the diode. It can be used to support any object other than a laser diode that has a lower or equal diameter to the support. Code M0176 Available Regular price €7.95 -€1.50 Price €6.45
Red Laser Line Module Generator 650nm 5mW Red Laser Line Module Generator 650nm 5mW features: - Type: red laser diode- Type of laser: line- Adjustable Focus- Wavelength: 650nm- Output power: 5mW- Operating voltage: 4.5-5V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130 mm Code M0039 Available Price €3.95
Red Laser Line Generator 650nm 20mW Red Laser Line Generator 650nm 20mW features:- Module Focus Adjustable Laser Head 3V- Type: Red laser diode- Type of laser: Line- Adjustable Focus- Wavelength: 650nm- Output power: 20mW- Operating voltage: 3V-4V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0050 Available Regular price €9.49 -€1.00 Price €8.49
Red Laser Cross Line Point Module Generator 650nm 50mW Red Laser Cross Line Point Module Generator 650nm 50mW features: - Type: red laser diode- Laser type: line, cross, point- Adjustable Focus- Wavelength: 650nm- Output power: 50mW- Operating voltage: 4.5-5V- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x45mm- Cable length: 130mm Code M0048 Last items in stock Price €19.89
Red Laser Line Module Generator 650nm 10mW Red Laser Line Module Generator 650nm 10mW features:- Module Focus Adjustable Laser Head 3V- Type: Red laser diode- Type of laser: Line- Adjustable Focus- Wavelength: 650nm- Output power: 10mW- Operating voltage: 3V-4V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0049 ✗ Out-of-Stock Price €6.78
Red Laser Diode Module 650nm 5mW 6mm 5V lL2N4 This module adapted for the arduino includes a laser diode and a 3-pin connector for a simple and quick adaptation with the Arduino. The diode is mainly used for laser toys, all kinds of level meter, instruments, stylus pen, mini LCD projector, remote listeners laser, alarm anti-theft light remote control. Light shots and different display can make the color of the image element a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC - Connector of 3 pins: 1- GND 2- VCC 3- Light control of the laser diode - Point mode: point facula - Continuous output - Operating temperature: -36 ° C - + 65 ° C - Laser wavelength: 650nm (red) Code M0077 Available Price €1.49
Red Laser Line Generator 650nm 20mW Red Laser Line Generator 650nm 20mW features:- Module Focus Adjustable Laser Head 3V- Type: Red laser diode- Type of laser: Line- Adjustable Focus- Wavelength: 650nm- Output power: 20mW- Operating voltage: 3V-4V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0050 Available Regular price €9.49 -€1.00 Price €8.49
Red Laser Diode 650nm 5mW 6mm 5V This diode is mainly used for laser toys, all kinds of level meter, instruments, pointer pen, mini LCD projector, laser From remote listeners, remote control burglar alarm light. Light shots and different display can make the color of the image item a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC - Mode of point: facula point - Continuous output - Operating temperature: -36 ° C - + 65 ° C - Laser wavelength: 650nm (red) - Diameter copper head is 6mm - Power cable length: 75 mm - Cover material: Brass - Working life: more than 2000 hours - Light power: Less than 5mW - Operating current: Less than 40mA Code M0076 Available Price €1.19
Red Laser Diode Module 650nm 5mW 6mm 5V lL2N4 This module adapted for the arduino includes a laser diode and a 3-pin connector for a simple and quick adaptation with the Arduino. The diode is mainly used for laser toys, all kinds of level meter, instruments, stylus pen, mini LCD projector, remote listeners laser, alarm anti-theft light remote control. Light shots and different display can make the color of the image element a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC - Connector of 3 pins: 1- GND 2- VCC 3- Light control of the laser diode - Point mode: point facula - Continuous output - Operating temperature: -36 ° C - + 65 ° C - Laser wavelength: 650nm (red) Code M0077 Available Price €1.49
Red Laser Line Module Generator 650nm 5mW Red Laser Line Module Generator 650nm 5mW features: - Type: red laser diode- Type of laser: line- Adjustable Focus- Wavelength: 650nm- Output power: 5mW- Operating voltage: 4.5-5V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130 mm Code M0039 Available Price €3.95
Red Laser Cross Line Point Module Generator 650nm 50mW Red Laser Cross Line Point Module Generator 650nm 50mW features: - Type: red laser diode- Laser type: line, cross, point- Adjustable Focus- Wavelength: 650nm- Output power: 50mW- Operating voltage: 4.5-5V- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x45mm- Cable length: 130mm Code M0048 Last items in stock Price €19.89
Red Laser Line Module Generator 650nm 10mW Red Laser Line Module Generator 650nm 10mW features:- Module Focus Adjustable Laser Head 3V- Type: Red laser diode- Type of laser: Line- Adjustable Focus- Wavelength: 650nm- Output power: 10mW- Operating voltage: 3V-4V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0049 ✗ Out-of-Stock Price €6.78
Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features: - Type: red laser diode- Type of laser: cross- Adjustable Focus- Wavelength: 650nm- Output power: 5mW- Operating voltage: 4.5-5V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0041 Available Price €3.95
Adjustable support for laser diode Adjustable mounting bracket for laser diode that has a plate with holes to securely fix it to any surface.It also has a screw to fix the laser diode and is adjustable in inclination, to obtain the perfect orientation of the diode. It can be used to support any object other than a laser diode that has a lower or equal diameter to the support. Code M0176 Available Regular price €7.95 -€1.50 Price €6.45