LED 5mm RGB Cathode Commun

Resistor 20K Ohm 5% 0,25W 1/4W features:
-20 Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

It allows controlling many different types of engines: - Up to 4 bidirectional current motors
- Up to 2 stepper motors (unipolar or bipolar) In addition it is provided with two connectors for servos.                   L293D Motor Drive Shield Expansion Board features:
- Minimum operating voltage: 4.5 V
- Maximum operating voltage: 36 V
- Maximum current: ± 1.2 A (650mA)
- Logic voltage: 5V
- Controller L293D
- Measures: 70x55x20 mm L293D controller consists of 4 H bridges with 650 mA current with thermal protection.
Pull-down resistors keep the motors off during startup.

2x Insulation Tapes PVC White 10m x 15mm x 0.13mm features:
- PVC insulating tape with adhesive
- Thickness of 0.13 mm
- Measures 10m x 15mm
- Quantity: 2 units
- Heat resistance: 80°C

Liquid Flux for Alcohol-Based Rosin Welding 15ml features:
- Flux liquid alcohol-based for electronic welding
- Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
- Liquid form
- Capacity: 15ml
- Content of solid bodies 0 ... 5%
- Viscosity (temp. 25 ° C) 794Mg / cm3
- The flux cleans and prepares the surfaces and components to be welded, facilitates the adhesion and fluidity of the tin thanks to the other components
- Cleans easily with alcohol
- Can be used with any tin

USB adapter that allows a direct USB connection to your ESP8266 ESP-01 or ESP-01S WiFi module. Based on the CH340 integrated circuit, which is a USB - Serial converter (UART).

RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features:
- RGB LED WS2812B
- WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual
- WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable.
- They are based on the 5050 LEDs
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors per LED
- Communication One-wire
- Power: 5 V
- Width: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
- Waterproof
- With 3M adhesive

Resistor 4,7M Ohm 5% 0,25W 1/4W features:
-4.7M Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

Voltmeter Amperemeter DC Red and Blue 100V 10A features:
- Supply voltage: 4.5V to 30V
- Voltage measurement range: 0V to 100V (± 1%)
- Min voltage resolution: 0.1V
- Current measurement range: 0A to 10A (± 1%)
- Min current resolution: 0.01A
- Operating current: 5mA to 15mA
- Display: Red LED color (Voltage) and Blue LED color (Intensity)
- Includes reverse polarity protection
- Measurement refresh time: 500ms
- Screen dimensions: 48 x 29 mm
- Recessed hole: 45.5 x 26.5 mm
- Depth: 21 mm
- Cable length: 150 mm
- Operating temperature: - 10ºC to 65ºC
- No battery needed
- Dual panel with voltmeter and digital ammeter