LED 5mm RGB Common Anode

LED Diode Assortment Kit 50x Red Green Yellow Blue White features:
  
- Lens color: Red, green, yellow, blue - diffuse, light white
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.0V-3.2V
- Voltage (white) 3.2V - 3.4V
- Anode (A): Positive (long leg): 17mm
- Cathode (K): Negative (shorter leg): 15 mm
- Operating temperature: -25ºC / 80ºC
- Welding temperature: + 260ºC
- Quantity: - 50 units
                  - 10x red
                  - 10x green
                  - 10x yellow
                  - 10x blue
                  - 10x white

Arduino UNO is the best board to start your experience with electronics and programming. If this is your first experience with the platform, UNO is the most robust board you can start with. UNO is the most widely used and documented board in the entire Arduino family. Its power ensures ATmega 328p microcontroller, the board is equipped with 14 digital pins, and 6 analog

The 28BYJ-48 has everything you need to start using stepper motors in your project
A stepper motor converts digital impulses into small steps of movement in one direction The engine also comes with a ULN2003 engine controller card
Can control two DC motors or a bipolar stepper motor with a maximum amperage of up to 500 mA
Equipped with state indicator LEDs A, B, C, D 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Boat features:
- Engine model: 28BYJ-48
- Phases engine: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per round: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm

Lot of 65 Male-Male jumper cables. Characteristic: -No soldering required
-You can easily modify or revise the circuits
-Quantity: 65 cables of different lengths and colors
-Cable lengths: 120mm, 150mm, 200mm, 240mm

Includes a switch to output the voltage built into the case itself.
It has a cover for protect the batteries.
The cover has perforation in case you want to secure it with a screw (not included).
Characteristic:
- Cable 12cm long
- Measures 70x 65x 18mm
- Battery length max 50mm
- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7)

For connecting Arduino modules or boards.
Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. 2x Cable Female - Female 4 Pins 4 Colors features:
- No soldering required
- Circuits can be easily modified or revised
- Quantity: 2 cables of 4 pins, female - female connector
- Colors: red, black, blue, green
- Pin pitch: 2.54mm
- Cable lengths: 70cm For one rapid construction of a prototype of an electronic circuit.

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Connector Jack 2.1x5.5mm Power Supply DC Male features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

- Immerse the probe in the fish tank to measure the water temperature Digital Thermometer with External Temperature Probe features:
- Cable length: 1m
- LCD screen
- Temperature range: -50 C ~ + 70C
- Powered by 2 batteries x LR44 / AG13 button (included)
- Cable length: approx.100cm
- External Dimensions: 48 x 28.5 x 15.2 mm
- Dimension LCD screen: 35 x 16 mm
- Color: Black
- Used to measure the temperature in: the rooms, the aquarium, terrarium in the heating system, in the car, fridge, freezer