LED Diode Assortment Kit 50x Red Green Yellow Blue White

120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:
- Length: 20cm
- Quantity: 120 cables
- Female-Female 40 units
- Male-Male 40 units
- Female-Male 40 units

The novelty of micro:Bit v2.2 for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker.

It contains a quick start guide in the same package.

- The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement - This sensor, unlike DHT11, is capable of measuring negative temperature values ​​and measures tenths of a degree
Characteristic:
- Operating voltage: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy
- Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy
- Maximum sampling rate: 2 seconds
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
Write texts on the OLED 0.96 '' screen
- Read the measurements of the temperature / humidity sensor DHT22 / AM2302 on a 0.96 '' OLED screen
Send />

Load cell Load Cell Weight Sensor 5kg features:
- Load cell to measure weight up to 5kg
- The transducer measures the deformation of the metal structure and converts it into a few mV
- Load range: 5kg
- Operating voltage: 3VDC ~ 14 VDC
- Nominal output: 1.0 ± 0.15mV / V
- Repeatability: 0.03% FS
- Effect of the temperature at the outlet: 0.01% F.S / °C
- Effect of temperature on zero: 0.05% F.S / °C
- Zero: ± 0.1000 mV / V
- Input impedance: 1115 + -10% Ω
- Output impedance: 1000 + - 10% Ω
- Insulation resistance:> = 1000 MΩ
- Safe Overload Rate: 150% FS
- Final overload rate: 200% FS
- Temperature range: -20 - 60 °C
- Material: Aluminum alloy
- Degree of protection: IP65

LM2577S 3A DC Boost Step-Up Controller Adjustable Step-Up features:
- Step-up stepper adjustable module.
- Output voltage may be greater than the input
- Use a multimeter to check the output voltage and adjust the potentiometer
- Chip LM2577S-ADJ
- Input voltage: 3.5V -35V
- Output voltage: 4-35V
- Current output: 2A, max. 3A with heat sink
- Power max. 20W
- Operating temperature: -40 to + 85 ºC
- Conversion efficiency: up to 92%
- Size: 44 x 30 mm

Quartz Crystal Oscillator 3,6864 MHz features:
- HC49 Low Profile Crystal Oscillator
- Type: Quartz Crystal 3,6864 MHz
- Frequency: 3,6864 MHz
- Format: Low profile
- Assembly: Intern

74LS86N DIP14 Input Logic NAND Gates O-Exclusive features:
- Blister: DIP14
- Number of pins: 14
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Input voltage VCC: 4.75 - 5.25 VDC
- High level input voltage V (IH): 2 VDC
- Low level input voltage V (IL): 0.8 VDC
- Input clamp voltage V (IK): -1.5 VDC
- High level output voltage V (OH): 2.4 - 3.4 VDC
- Low level output voltage V (OL): 0.2 - 0.4 VDC - High level output current I (OH): -800 μA
- Low level output current I (OL): 16 mA
- Input current to VCC: 1 mA
- High level input current I (IH): 40 μA
- Low level input current I (IL): -1.6 mA
- Short circuit output current I (OS): -55 - -18 mA

Charger 4 x 9V 6F22 with EU Power Supply Cable features:
The everActive NC 109 charger is a unique, specialized design that allows you to charge from 1 to 4 pieces of 9V Ni-MH batteries - each cell is charged individually.
It allows you to charge up to 4pcs of 9V batteries simultaneously, in any configuration / combination, with any capacity, any manufacturer.
The charger has 4 independent charging channels.
The most important features: of the NC109 loader:
- quick charging of a large number of batteries simultaneously - ideal for industrial and professional applications,
- individual LED indicator of charger work for each cell - with full charge signaling,
- 100-240V AC power adapter included, optionally a 12V car adapter is available,