20x Zener Diode BZX55C4V3 4.3V 500mW DO-35 0.5W 4V3

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.

Characteristic:

- Voltage: 3.2-3.6V

- Current : 700mA

- Luminous flux: 5-8LM

- Beam angle: 140 degrees

- Colour emission: Ultraviolet

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil
- Voltage: 3.1-4.1V
- Current: 700mA
- Luminous flux: 39-55LM
- Ã beam angle: 120 degrees
- Color emission: blue

5mm multicolor LED with automatic color change. 7 different colors are emitted and the blinking is fast.

RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features:
- RGB LED WS2812B
- WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual
- WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable.
- They are based on the 5050 LEDs
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors per LED
- Communication One-wire
- Power: 5 V
- Width: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
- Waterproof
- With 3M adhesive

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.

High power 50W blue LED suitable for KTV light, projection lamps.
Ideal for DIY projects.
High power 50W Blue LED diode features:
- Supply voltage: 30V - 33V
- Current: 1500mA,
- Chip type: 28x47mm,
- Material: aluminum base,
- Silver color,
- Power: 50W,
- Connector type: B22 welding,
- Type of emitter: LED,
- Total emitters: 50,
- Color BIN: blue,
- Theoretical lumens: 1500-2000 lumens
- Wavelength: 460-465 nm,
- Dimensions metal base: 51x45 mm.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

LED Diode Assortment Kit 50x Red Green Yellow Blue White features:
  
- Lens color: Red, green, yellow, blue - diffuse, light white
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.0V-3.2V
- Voltage (white) 3.2V - 3.4V
- Anode (A): Positive (long leg): 17mm
- Cathode (K): Negative (shorter leg): 15 mm
- Operating temperature: -25ºC / 80ºC
- Welding temperature: + 260ºC
- Quantity: - 50 units
                  - 10x red
                  - 10x green
                  - 10x yellow
                  - 10x blue
                  - 10x white

Adjustable mounting bracket for laser diode that has a plate with holes to securely fix it to any surface.
It also has a screw to fix the laser diode and is adjustable in inclination, to obtain the perfect orientation of the diode. It can be used to support any object other than a laser diode that has a lower or equal diameter to the support.