CD4093BE DIP14 CMOS Input NAND Gates Schmitt Triggers
  • CD4093BE DIP14 CMOS Input NAND Gates Schmitt Triggers
  • CD4093BE DIP14 CMOS Input NAND Gates Schmitt Triggers

CD4093BE DIP14 CMOS Input NAND Gates Schmitt Triggers

T0052

CD4093BE DIP14 CMOS Input NAND Gates Schmitt Triggers features:
- Blister: DIP14,
- Number of pins: 14
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Positive Trigger VP (min): 2.9 - 9.4 VDC
- Negative trigger VN (min): 1.9 - 7.3 VDC
- Hysteresis voltage VH (min): 0.9 - 3.5 VDC
- Input voltage VDD: -0.5 - 20 VDC
- High level input voltage V (IH): 1.5 - 4.2 VDC
- Low level input voltage V (IL): 0.5 - 1.8 VDC
- High level output voltage V (OH): 5 - 10 VDC
- Low level output voltage V (OL): 0.05 VDC - High level output current I (OH): -6.8 - -1 mA
- Low level I output current (OL): 1 - 6.8 mA
- Inactive current of device I (DD): 10 - 20 μA
Texas Instruments
5905323235052
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

CD4093BE DIP14 CMOS Input NAND Gates Schmitt Triggers features:


- Blister: DIP14,
- Number of pins: 14
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Positive Trigger VP (min): 2.9 - 9.4 VDC
- Negative trigger VN (min): 1.9 - 7.3 VDC
- Hysteresis voltage VH (min): 0.9 - 3.5 VDC
- Input voltage VDD: -0.5 - 20 VDC
- High level input voltage V (IH): 1.5 - 4.2 VDC
- Low level input voltage V (IL): 0.5 - 1.8 VDC
- High level output voltage V (OH): 5 - 10 VDC
- Low level output voltage V (OL): 0.05 VDC - High level output current I (OH): -6.8 - -1 mA
- Low level I output current (OL): 1 - 6.8 mA
- Inactive current of device I (DD): 10 - 20 μA
- Input current I (IN): ± 0.1 μA - Operating temperature: -55 ° C to 125 ° C
- Storage temperature: -65 ° C to 150 ° C

Customers who bought this product also bought

10x Photoresistor GL5539 LDR 50k - 100k

Photoresistance is a resistor whose resistance decreases as the intensity of the light that falls on it increases. 10x Photoresistor GL5539 LDR 50k - 100k features:
- Model: GL5539
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 100mW
- Resistance with light (10lux): 50-100KΩ
- Resistance with darkness (0lux): 5MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC

S0013

Price €0.12

BC547B NPN 50V 100mA transistor 0.1A TO-92

Product Category: Bipolar Transistor, NPN.
BC547B NPN 50V 100mA transistor 0.1A TO-92 features:

- Package / Case: TO-92
- Quantity: 25 units
- Collector-base voltage VCBO: 50V
- Collector-emitter voltage VCEO: 45V
- VEBO emitter-base voltage: 6V
- Continuous collector current: 100mA
- DC MAX collector current: 200mA
- Maximum power dissipation: 500mW

T0043

Price €0.03

10x Female-Male Cables 20cm Jumpers Dupont

10x Female-Male Cables 20cm Jumpers Dupont features:
-Length: 20cm
-Quantity: 10 cables
-Connectors have male and female header contacts at either end
-Compatible with male and female connectors 2,54mm
-High quality and good working conditions
-Easy to install and use

K0009

Price €1.40

A4988 + RepRap Radiator

A4988 + RepRap Radiator features:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A (adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8, and 1/16
- Factory soldered temples
- Use potentiometer to adjust current
- Measurements: 20x16x12 mm

I0023

Price €1.57

UNO Board CH340 clone

- It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields
Characteristic:
- ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: USB female Type B

B0011

Regular price €6.19 -15% Price €5.26

Helping Magnifying Hand Tool

It is a very ideal tool when the third hand is required.
Helping Magnifying Hand Tool features:
- Magnifying glass diameter 60mm
- Weight: 0.5kg
- Dimensions: approx. 15 (26) x 17 x 7cm 

H0011

Price €6.57

LED Diode Assortment Kit 30 pcs 5mm red, green, yellow

LED Diode Assortment Kit 30 pcs 5mm red, green, yellow features:
- Lens color: red, green, yellow - diffuse
- Size: 5mm
- Operating current: 20mA
- Voltage (red) 1,8V-2,3V
- Voltage (green) 3,2V-3,4V
- Voltage (yellow) 1,8V-2,3V
- Anode (A): Positive (long leg): 28mm
- Catode (K): Negative (short leg): 25mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: +260ºC
- Quantity: 30 units
*10x red
*10x green
*10x yellow

P0011

Price €0.05
€0.91

0,91 tax excl.

1
30+ items
Price €0.91

Order until 4pm we will send today
30 days return