Sound Detection Sensor Module

Resistor 4,7K Ohm 5% 0,25W 1/4W features:
- 4.7K Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

1N4007 Rectifier Diodes 1A 1000V DO-41 features:
- Standard rectifier diode
- Configuration: Simple
- Reverse voltage: 1000V
- Direct voltage drop: 1V
- Direct direct current: 1A
- Maximum overvoltage current: 30A
- Encapsulated: DO-41
- Operational tension: -65ºC to + 125ºC

It has an ATMega32U4 chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can solder only the pins we need. Characteristic: - Microcontroller: ATmega32U4
- Operation: 5V
- Power (max): 5-12V
- Total I / O pins: 20
- PWM pins: 5
- Analog pins: 12
- Maximum current of I / O pins: 40 mA
- Maximum current of pin 3.3V: 50 mA
- Flash memory: 32 KB (4 KB used by the bootloader)
- SRAM: 2.5 KB
- EEPROM: 1 KB
- Speed: 16 MHz
- external interrupt
- TWI / I2C, UART, SPI interfaces
- Dimensions: 18x33mm
- Weight: 30 grams

This module specially designed for Arduino will allow you to generate a light of any color (RGB) quickly and accurately.
The LED Bulb Module RGB, consisting of an LED capable of creating any color using RGB, has a PWM voltage input with three pins. These are capable of shining in a wide range of colors thanks to the mixture of the three colors. primary (red, green and blue).
These types of diodes are called RGB and are made up of three red, green and blue diodes in the same package.
Thanks to the variation of the intensity of these three diodes, we can create a composition of colors. With this led you can handle more than 16.5 million colors.

Resistor 10K Ohm 5% 0,25W 1/4W features:
-1 unit - 10K Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

It consists of a 16-character, 2-row display
The display is compatible with the HD44780 controller
Ideal for projects with Arduino
You can use it with PIC, AVR, STM32
16x2 LCD screen 1602 Blue welded pins features:

- LCD screen, 16 characters and 2 lines
- 5V power supply
- HD44780 compatible controller
- Backlit blue background, white letters
- Includes an adjustable contrast pin - It has soldered pins and is ready to connect - Dimensions (mm): 80 x 36 x 19

Photoresistance is a resistor whose resistance decreases as the intensity of the light that falls on it increases. 10x Photoresistor GL5539 LDR 50k - 100k features:
- Model: GL5539
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 100mW
- Resistance with light (10lux): 50-100KΩ
- Resistance with darkness (0lux): 5MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC

- It consists of a 20-character, 4-row display
- The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem
- Only two pins are needed for communication, SDA and SCL
- Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32
PCF8574 - & gt; the default address 0x20
PCF8574A - & gt; the default address 0x3F
- It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2
20x4 2004 LCD display PCF8574T I2C Backlit Blue features:

- LCD screen, 20 characters and 4 lines
- 5V power supply
- HD44780 compatible controller