Peltier Ceramic Cell TEC1 12706 12V 60W Price €3.95 Add to cart LED Diode COB 20W 6000K White SMD Price €4.49 Add to cart Thermal Silicone Paste Heatsink Temperature 100g Price €5.79 Add to cart 150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car Price €4.99 Add to cart LED Diode COB 10W 6000K White SMD Price €1.32 Add to cart 10 other products in the same category Previous Next LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 Available Price €0.98 WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.69 3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50 White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93 LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €10.95 LED Diode COB 10W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0145 Available Price €1.32 LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Available Price €0.98 LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 Available Price €3.38 Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Last items in stock Price €39.91 Error in the product description. Report
LED Diode COB 20W 6000K White SMD Price €4.49 Add to cart Thermal Silicone Paste Heatsink Temperature 100g Price €5.79 Add to cart 150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car Price €4.99 Add to cart LED Diode COB 10W 6000K White SMD Price €1.32 Add to cart 10 other products in the same category Previous Next LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 Available Price €0.98 WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.69 3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50 White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93 LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €10.95 LED Diode COB 10W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0145 Available Price €1.32 LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Available Price €0.98 LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 Available Price €3.38 Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Last items in stock Price €39.91 Error in the product description. Report
Thermal Silicone Paste Heatsink Temperature 100g Price €5.79 Add to cart 150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car Price €4.99 Add to cart LED Diode COB 10W 6000K White SMD Price €1.32 Add to cart 10 other products in the same category Previous Next LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 Available Price €0.98 WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.69 3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50 White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93 LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €10.95 LED Diode COB 10W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0145 Available Price €1.32 LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Available Price €0.98 LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 Available Price €3.38 Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Last items in stock Price €39.91
150W Boost Converter Voltage Regulator Module DC Voltage 12V-35 Car Price €4.99 Add to cart LED Diode COB 10W 6000K White SMD Price €1.32 Add to cart 10 other products in the same category Previous Next LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 Available Price €0.98 WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.69 3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50 White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93 LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €10.95 LED Diode COB 10W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0145 Available Price €1.32 LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Available Price €0.98 LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 Available Price €3.38 Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Last items in stock Price €39.91
LED Diode COB 10W 6000K White SMD Price €1.32 Add to cart 10 other products in the same category Previous Next LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 Available Price €0.98 WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.69 3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50 White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93 LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €10.95 LED Diode COB 10W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0145 Available Price €1.32 LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Available Price €0.98 LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 Available Price €3.38 Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Last items in stock Price €39.91
LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 Available Price €0.98
WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.69
3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50
White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93
LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83
40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €10.95
LED Diode COB 10W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0145 Available Price €1.32
LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Available Price €0.98
LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 Available Price €3.38
Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Last items in stock Price €39.91
LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 Available Price €0.98
WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.69
3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50
White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93
LED Diode COB 10W Orange SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.The advantages of LED COB:- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional lightMount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0034 Available Price €2.83
40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €10.95
LED Diode COB 10W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0145 Available Price €1.32
LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Available Price €0.98
LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 Available Price €3.38
Strip WS2812B 5m 30 LED /m white RGB RGB LEDs WS2812B WS2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually. WS2812B includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are called individually indexable. They are based on the 5050 LED. 30 individually indexable LEDs. 24-bit color control (8-PWM) -bit per channel) 16.8 million colors per LED One-wire communication Power: 5 V Width: 11 mm Thickness: 2.6 mm Length: 5 meters Consumption: 1.8A (all white) Waterproof With 3M adhesive Input and output terminals (data and power) Links https://learn.adafruit.com/adafruit-neopixel-uberguide/> Code P0106 Last items in stock Price €39.91