Red Laser Line Generator 650nm 20mW
  • Red Laser Line Generator 650nm 20mW
  • Red Laser Line Generator 650nm 20mW
  • Red Laser Line Generator 650nm 20mW

Red Laser Line Generator 650nm 20mW

M0050

Red Laser Line Generator 650nm 20mW features:
- Module Focus Adjustable Laser Head 3V
- Type: Red laser diode
- Type of laser: Line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 20mW
- Operating voltage: 3V-4V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

OEM
Add to wish list

Red Laser Line Generator 650nm 20mW features:


- Module Focus Adjustable Laser Head 3V
- Type: Red laser diode
- Type of laser: Line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 20mW
- Operating voltage: 3V-4V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

Customers who bought this product also bought

Switch On/On 6-pin 6A SPDT

This switch can be used for development projects and for the industry. All metal parts are not oxidized, the insulation material is of high quality.
Its pins protected by an anti oxidant makes welding much easier. Switch On/On 6-pin 6A SPDT features:
- Type: Latch SPDT
- Material: Plastic, metal
- Maximum operating current and voltage: 3A / 250V, 6A / 125V
- Number of pins: 6
- Pin size: 4.5x2 mm
- Type of current: AC
- Pins to be welded
- Switch action: 2 positions On/On
- Size: 13.2x12.7x33.3mm

K0152

Price €0.45

Battery holder 2x AA 3V

Battery holder 2x AA 3V features:
- Cable 15cm long
- Measurements 59x 33x 16mm
- Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7)

PP002

Price €0.99

8A DC Downstream Converter 8-40V to 1.25-35V Current Control XL4016

A high-performance regulator-booster.
24V battery charger - DC / CV method.
Power supply of the laptop from a 12V car battery.
A high-performance dimmer-regulator.
Charger for Li-Ion, Li-Po batteries etc. - CC / CV method.
LED Constant current driver for LED diodes.
Characteristic:
- Input voltage: 6V -40V
- Output voltage: 1.25-35V (adjustable)
- Output current: 8A, (10A maximum)
- Output power: 300W maximum
- Efficiency of Conversion: up to 95%
- Wiring: Solderless terminal
- Operating frequency: 300kHz
- Ambient temperature exceeds 40 ° C, increase heat dissipation
- LED indicator two-color;
- Charge red
- Fully charged light green
- No charge green

A0011

Price €7.95

XL6009 DC-DC Step-Up Booster Controller LM2577

- The XL6009 module has a superior performance than the LM2577 module
- The regulator-booster of High performance
Characteristic:
- Based on the XL6009E1 regulator
- Input voltage: 3V-32V,
- Output voltage: 5-35V (adjustable),
- Output current: 2A maximum 3A (heat sink is required)
- Conversion efficiency: up to 94%
- Rectifier: not synchronous rectification
- Short circuit protection: current limitation, since recovery
- Operating temperature: industrial grade (-40 ° C - 85 ° C)
- Load regulation: ± 0.5%
- Voltage regulation: ± 0.5%
- Size: 50 x 22 x 15 mm

A0005

Price €2.45

Red Laser Line Module Generator 650nm 5mW

Red Laser Line Module Generator 650nm 5mW features:
- Type: red laser diode
- Type of laser: line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130 mm

M0039

Price €3.95

Female DC Power Connector Jack 2.1x5.5mm

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

K0050

Price €0.49

30x 1N4007 Rectifier Diodes 1A 1000V DO-41

1N4007 Rectifier Diodes 1A 1000V DO-41 features:
- Standard rectifier diode
- Configuration: Simple
- Reverse voltage: 1000V
- Direct voltage drop: 1V
- Direct direct current: 1A
- Maximum overvoltage current: 30A
- Encapsulated: DO-41
- Operational tension: -65ºC to + 125ºC
- Quantity: 30 units

T0002

Price €0.05

Adjustable support for laser diode

Adjustable mounting bracket for laser diode that has a plate with holes to securely fix it to any surface.
It also has a screw to fix the laser diode and is adjustable in inclination, to obtain the perfect orientation of the diode. It can be used to support any object other than a laser diode that has a lower or equal diameter to the support.

M0176

Regular price €7.95 -€1.50 Price €6.45
€9.49
Save €1.00 €8.49

7,02 tax excl.

Tax included 1
30+ items
Regular price €9.49 Price €8.49

Order until 4pm we will send today
30 days return