Red Laser Diode 650nm 5mW 6mm 5V

Push button 6x6x4mm features:
-Touch Push Tact Switch mini electronic Arduino push button
-Measures: 6x6x45mm
-Quantity: 1 unit

A4988 + RepRap Radiator features:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A (adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8, and 1/16
- Factory soldered temples
- Use potentiometer to adjust current
- Measurements: 20x16x12 mm

Anti-Static Tweezers ESD 117mm features:
- Anti-static tweezers, curved tip, matt black
- Length: 117mm
- Width: 10mm
- ESD pliers
- High precision, without producing dust, resistant to high temperatures

The voltage / power / battery level indicator KA2284 contains five LED lights that light up progressively as the voltage increases, from green to red to yellow.
It is ideal for your projects that require voltage level indicators, such as battery capacity and audio level indicators.
The built-in potentiometer adjusts the range (sensitivity) of the LED display, and the DC or AC input can be selected via the P2 bridge.
The AC and DC input can be controlled with bridge P2: bypassed for DC, open for AC.
Adjustable power level through the potentiometer. Power Level KA2284 Indicator Module 5 LED features:
- Operating voltage: 3.5 - 12 VDC
- 5 level LED KA2284 controller
- Adjustable power
- 4 pin terminal:
       - IN: Input voltage to measure

Dupont female-female connector cable to PH2.00 for Nema engine features:
Dupont 2.54 female to PH2.00 female connecting cable for Nema motor Length 100cm

Adjustable Module Buck Converter DC 3A 1,6-26V MP1584 Step-Up Down features:
- Based on the MP1584EN regulator
- Output Voltage: 1.6V - 26V DC (adjustable)
- Input Voltage: 4.5V - 28V DC
- Max. Output Current: 3A (with heat sink)
- Frequency: 1MHz
- Conversion Efficiency (1A): 94%
- Short circuit protection
- Protection against overheating
- Operating temperature: -40ºC to + 85ºC
- Measures 22 x 17 x 4 mm

1N4007 Rectifier Diodes 1A 1000V DO-41 features:
- Standard rectifier diode
- Configuration: Simple
- Reverse voltage: 1000V
- Direct voltage drop: 1V
- Direct direct current: 1A
- Maximum overvoltage current: 30A
- Encapsulated: DO-41
- Operational tension: -65ºC to + 125ºC

MQ-9 Carbon Monoxide Sensor Module features:
- Main chip: MQ-9 methane sensor and comparator LM393
- Working voltage: 5V
- Current: 150mA
- Digital output: TTL 0/1
- Analog output: analog voltage sensing value
- Quick response features:
- Detection concentration:
   20ppm- 2000ppm carbon monoxide
   500ppm- 10000ppm methane CH4
   500ppm- 10000ppm LPG
- Adjustable sensitivity with the potentiometer
- Size: 32mm x 20mmx 18mm