Diodes

RGB LEDs are characterised by direct colour, good colour consistency, RGB - three colours in one package, high flux per LED, more energy efficient than incandescent and most halogen lamps, instant light (less than 100ns). 48W high power RGB LED suitable for projection lamps. Ideal for DIY projects.

High power 50W LED suitable for KTV light, projection lamps.
Ideal for DIY projects.
DC 12V CPU heatsink for high power 50W LED diodes features:
- 35mm thick heat sink,
- DC 12V Ø95 x 25mm fan,
- 4 screws to fix the base carrying the LED diodes,
- Step between screws: 71.5mm,
- Includes thermal grease.

High power 50W blue LED suitable for KTV light, projection lamps.
Ideal for DIY projects.
High power 50W Blue LED diode features:
- Supply voltage: 30V - 33V
- Current: 1500mA,
- Chip type: 28x47mm,
- Material: aluminum base,
- Silver color,
- Power: 50W,
- Connector type: B22 welding,
- Type of emitter: LED,
- Total emitters: 50,
- Color BIN: blue,
- Theoretical lumens: 1500-2000 lumens
- Wavelength: 460-465 nm,
- Dimensions metal base: 51x45 mm.

Characteristic:
- Lens color: white,
- Diameter of the bulb: 5 mm,
- Operating current: 20mA,
- Voltage: 2.0V-2.2V,
- Wavelength: 588-590 nm,
- Anode (A): Positive (long leg): 19mm,
- Cathode (K): Negative (shorter leg): 17 mm,
- Operating temperature: -25ºC / 80ºC,
- Welding temperature: + 260ºC,
- Quantity: 10 units.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

Addressable 5050 RGB LED bar (5mm x 5mm) with low current draw. LEDs can be joined by connecting the output of one module to the input of another.
Data line with a very specific protocol, requires a real-time microcontroller AVR, Arduino, PIC, mbed, etc. A minimum 8 MHz processor is required.

Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.
Characteristic:
- Chip 28x47mil
- Voltage: 2.85-3.85V
- Current: 350mA - Luminous flux: 120-130LM
- Beam angle: 130 degrees

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil
- Voltage: 3.1-4.1V
- Current: 700mA
- Luminous flux: 39-55LM
- Ã beam angle: 120 degrees
- Color emission: blue

WS2812B are LEDs that have built-in logic, making it possible to vary the color of each LED individually.
WS2812B includes a integrated inside each LED, which allows each pixel to be accessed individually.
For this reason, these types of LEDs are called individually indexable.
They are based on the 5050 LED. 

LED Diode Assortment Kit 15 pcs 5mm red, green, yellow features:
- Lens color: red, green, yellow - diffuse
- Size: 5mm
- Operating current: 20mA
- Voltage (red) 1,8V-2,3V
- Voltage (green) 3,2V-3,4V
- Voltage (yellow) 1,8V-2,3V
- Anode (A): Positive (long leg): 28mm
- Catode (K): Negative (short leg): 25mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: +260ºC
- Quantity: 30 units
*5x red
*5x green
*5x yellow

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 3.2-3.4V 
- Current: 350mA 
- Luminous flux: 100-110LM 
- Ã beam angle: 140 degrees 
- Color emission: pink

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.

Characteristic:

- Voltage: 3.2-3.6V

- Current : 700mA

- Luminous flux: 5-8LM

- Beam angle: 140 degrees

- Colour emission: Ultraviolet

Through-hole LED for 12V DC with black and red 20cm cable.

• Diode type: with cable
• LED lens type: Clear
• Direct diode voltage: 12V
• LED colour: light blue
• The distinguishing feature: 12 V LED with 20 cm RoHS cable
• LED size: 3 mm

Through-hole LED for 12V DC with 20cm black and red cable.

• Diode type: with cable
• LED lens type: Diffusive (matt)
• Direct diode voltage: 12V
• LED colour: Green
• The distinguishing feature: 12 V LED with 20 cm RoHS cable
• LED size: 3 mm

Through-hole LED for 12V DC with black and red 20cm cable.

• Diode type: with cable
• LED lens type: Clear
• Direct diode voltage: 12V
• LED colour: light yellow 
• The distinguishing feature: 12 V LED with 20 cm RoHS cable
• LED size: 3 mm

Yellow LED indicator light for machinery lights

Green LED indicator light for machinery lights

Red LED indicator light for machinery lights

Strip of 300 warm white coloured LED lights, 5 metres long.

WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features:
- WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually
- WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable.
- They are based on the 5050 LED
- 24-bit color control (8-bit PWM per channel)
- 16.8 millions of colors per LED
- One-wire communication
- Power: max. 5 Vdc
- Current: 18.5mA
- Input and output terminals (data and power)

Low Signal High Speed Switching. These diodes are widely used for multiplexing signals, such as buttons or digital inputs

WS2812B are LEDs that have built-in logic, making it possible to vary the color of each LED individually.
WS2812B includes a integrated inside each LED, which allows each pixel to be accessed individually.
For this reason, these types of LEDs are called individually indexable.
They are based on the 5050 LED. 

Red, yellow and green LED traffic light mini kit ideal for educational and beginner Arduino projects.

Intelligent 5 metre LED strip by WiFi and RF, great for creating any atmosphere in any room. Change its colour and rhythm from your mobile phone or its remote control. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes.

5 meter LED strip easily installed for use with Sonoff controllers via WiFi and RF. Great lights to create any ambience in any room. Change their colour and rhythm from your mobile or controller. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. (Controller and adapter not included)

The perfect solution for not worrying about the length required on your RGB LED strip, now with a WiFi driver compatible with the eWeLink APP and voice assistants like Google Home or Alexa. Also includes a 24-key IR remote control.

You will be able to turn on and control your strip lights anytime and anywhere, and control it with just a click on your smart phone or tablet via APP eWeLink, or voice assistants, without time and distance limitations.

This RGB LED strip is based on LED WS2812. It is equipped with 30 LEDs and has a length of 5 metres. You can easily control the behaviour of these LEDs using the included remote control or using your mobile phone via Bluetooth. Watch the video for more info.

Grove module with a red LED light. Ideal for quick and easy connections thanks to the Seeed Grove connector.

This chain has DC5V LEDs that have built-in logic, so it is possible to vary the colour of each LED individually.

WS2811 includes a built-in integrated inside each LED, which allows access to each pixel individually. Black background

Easy programming with Arduino, ESP32, ESP8266, etc. 

1N4007 Rectifier Diodes 1A 1000V DO-41, 1000 pieces packed in bulk in a box.

2 meter LED strip easily installed for use with Sonoff controllers via WiFi and RF. Great lights to create any ambience in any room. Change their colour and rhythm from your mobile or controller. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. (Controller and adapter not included)

Intelligent 5 metre LED strip by WiFi and Bluetooth, great for creating any atmosphere in any room. Change its colour and rhythm from your mobile phone or its remote control. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes.

Blue LED indicator light for machinery lights

Red LED indicator light for machinery lights

Green LED indicator light for machinery lights

Blue LED indicator light for machinery lights.

Yellow LED indicator light for machinery lights.

Strip of 300 cold white coloured LED lights, 5 metres long.

Programmable LED module with flexible display, 64-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED.

Programmable LED module with flexible display, 256-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED.

Programmable LED module with flexible display, 256-pixel matrix light, individually addressable. WS2812B are LEDs that have integrated logic, so it is possible to vary the colour of each LED individually. WS2812B has a built-in integrated logic within each LED, which allows access to each pixel individually. For this reason these LEDs are called individually indexable. They are based on the 5050 LED.