Quartz Crystal Oscillator 20 MHz Quartz Crystal Oscillator 20 MHz features:- Low Profile Crystal Oscillator- Type: Quartz Crystal 20 MHz- Frequency: 20 MHz- Format: Low profile- Assembly: Intern Code E0014 Available Price €0.40
Integrated Circuit Supports DIP18 Width 10.16mm Integrated Circuit Supports DIP18 Width 10.16mm features: - Type: DIP DIL- Total number of pins: 18- Step between pins: 2.54 mm- Material: Polybutylene terephthalate- Length: 20.32 mm- Width: 10.16 mm- Temperature min .: -25 °C- Max temperature: +85 °C- RoHS compliant Code Z0007 Backorder Price €0.16
Electronic Prototype ABS Plastic Black Box 100x60x25 mm Electronic Prototype ABS Plastic Black Box 100x60x25 features: - Box for electronic projects, power supply units, student projects,amplifiers, etc- Dimension 100x60x25 mm Code H0120 Available Price €1.78
A4988 + RepRap Radiator A4988 + RepRap Radiator features: - Minimum operating voltage: 8 V - Maximum operating voltage: 35 V - Maximum current: ± 2 A (adequately ventilated or refrigerated) - Logic voltage: 3 V / 5.5V - Microstep resolution: full, 1/2, 1/4, 1/8, and 1/16 - Factory soldered temples - Use potentiometer to adjust current - Measurements: 20x16x12 mm Code I0023 ✗ Out-of-Stock Price €1.57
Batch of 600 Units 1/4W Resistors Various values Ohm Ω Batch of 600 Units 1/4W Resistors Various values Ohm Ω features: - Each lot contains (30 x 20 units): 10Ω, 22Ω, 47Ω, 100Ω, 150Ω, 200Ω, 220Ω, 270Ω, 330Ω, 470Ω, 510Ω, 680Ω, 1KΩ, 2KΩ, 2.2KΩ, 3.3KΩ, 4.7KΩ, 5.1KΩ, 6.8KΩ, 10KΩ, 20KΩ, 47KΩ, 51KΩ, 68KΩ, 100KΩ , 220KΩ, 300KΩ, 470KΩ, 680KΩ, 1M - Tolerance: ± 5% - Power: 0.25W Code D0070 Available Price €3.26
Mini vibration engine for Arduino and Raspberry Pi 5 VDC This mini vibration motor runs on 5 VDC and can be used for Arduino and Raspberry projects. It is a direct current motor. Mini vibration engine for Arduino and Raspberry Pi 5 VDC features: - Voltage: 5 VDC, - Current: 75mA, - Rotation speed: 1100 (rpm), - Efficiency: 80%, - Dimensions: 10x27mm. Code M0174 Available Price €0.83
Transistor heat sink with TO-220/TIP120 box Heat sink for transistors with TO-220 / TIP120 box Transistor heat sink with TO-220/TIP120 box features: Aluminum heatsink: - Dimensions: 25x15x10mm Code T0069 Available Price €0.37
HC-SR04 Ultrasonic Sensor Distance Measuring Module It is very easy to make it work with an Arduino, PIC or any other microcontroller. In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle. HC-SR04 Ultrasonic Sensor Distance Measuring Module features: - Supply voltage: 5V (4.5V- 6V) - Consumption: 30 mA typical, (35 mA max) - Interface: VCC , GND, Signal - Range: 2 cm to 3 meters - Angle 15º - LED indicator of measurement in progress - Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm - Quantity: 1 unit Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry: Automatic robot operation with obstacle detection /> Code S0007 Available Price €1.48
Grove - Red LED Grove module with a red LED light. Ideal for quick and easy connections thanks to the Seeed Grove connector. Code SS022 Available Regular price €2.31 -10% Price €2.08
LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Last items in stock Price €0.81
Sonoff Spider Z Smart Wifi RGB LED Strip Controller - support Alexa The perfect solution for not worrying about the length required on your RGB LED strip, now with a WiFi driver compatible with the eWeLink APP and voice assistants like Google Home or Alexa. Also includes a 24-key IR remote control. You will be able to turn on and control your strip lights anytime and anywhere, and control it with just a click on your smart phone or tablet via APP eWeLink, or voice assistants, without time and distance limitations. Code WS012 ✗ Out-of-Stock Price €9.50
WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.40
1N4007 Rectifier Diodes 1A 1000V DO-41 1N4007 Rectifier Diodes 1A 1000V DO-41 features:- Standard rectifier diode- Configuration: Simple- Reverse voltage: 1000V- Direct voltage drop: 1V- Direct direct current: 1A- Maximum overvoltage current: 30A- Encapsulated: DO-41- Operational tension: -65ºC to + 125ºC Code T0002 Available Price €0.04
30x Rectifier Diodes 1N4148 100V 200mA DO-35 Low Signal High Speed Switching. These diodes are widely used to multiplex signals, such as buttons or digital inputs Characteristic: - Reverse voltage: 100V, - Forward voltage drop: 1V to 10mA, - Forward direct current: 200mA, - Maximum overvoltage current: 4A, - Dissipated power: 500mW, - Recovery time: 4ns, - Configuration: Simple, - Package: DO-35, - Quantity: 30 units . Code T0003 Available Price €0.03
SONOFF L1 - Intelligent LED strip light WiFi IP65 5M Intelligent 5 metre LED strip by WiFi and RF, great for creating any atmosphere in any room. Change its colour and rhythm from your mobile phone or its remote control. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. Code WS016 ✗ Out-of-Stock Price €30.57
10x Zener Diode BZX85C4V7 4.7V 1.3W DO-41 1300mW 4V7 10x Zener Diode BZX85C4V7 4.7V 1.3W DO-41 1300mW 4V7 features:-Zener voltage: 4.7V-Tolerance: 5%-Power dissipated: 1300mW-Enter Zener: 13 Ohm-Configuration: Simple-Encapsulated: DO-41-Temperature of work: -65C to 200C-Quantity: 10 units Code T0032 Available Price €0.17
40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €8.22
LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 ✗ Out-of-Stock Price €0.81
Grove - Red LED Grove module with a red LED light. Ideal for quick and easy connections thanks to the Seeed Grove connector. Code SS022 Available Regular price €2.31 -10% Price €2.08
LED Diode 1W Warm White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 2.85-3.85V - Current: 350mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0151 Last items in stock Price €0.81
Sonoff Spider Z Smart Wifi RGB LED Strip Controller - support Alexa The perfect solution for not worrying about the length required on your RGB LED strip, now with a WiFi driver compatible with the eWeLink APP and voice assistants like Google Home or Alexa. Also includes a 24-key IR remote control. You will be able to turn on and control your strip lights anytime and anywhere, and control it with just a click on your smart phone or tablet via APP eWeLink, or voice assistants, without time and distance limitations. Code WS012 ✗ Out-of-Stock Price €9.50
WS2812 RGB 5050 Smart Addressable 5V Arduino compatible LED WS2811 WS2812 RGB 5050 Smart Addressable 5V Arduino LED WS2811 features: - WS2812 are LEDs that have built-in logic, making it possible to vary the color of each LED individually - WS2812 includes an integrated inside each LED, which allows access to each pixel individually. For this reason, these types of LEDs are individually indexable. - They are based on the 5050 LED - 24-bit color control (8-bit PWM per channel) - 16.8 millions of colors per LED - One-wire communication - Power: max. 5 Vdc - Current: 18.5mA - Input and output terminals (data and power) Code P0102 Available Price €1.40
1N4007 Rectifier Diodes 1A 1000V DO-41 1N4007 Rectifier Diodes 1A 1000V DO-41 features:- Standard rectifier diode- Configuration: Simple- Reverse voltage: 1000V- Direct voltage drop: 1V- Direct direct current: 1A- Maximum overvoltage current: 30A- Encapsulated: DO-41- Operational tension: -65ºC to + 125ºC Code T0002 Available Price €0.04
30x Rectifier Diodes 1N4148 100V 200mA DO-35 Low Signal High Speed Switching. These diodes are widely used to multiplex signals, such as buttons or digital inputs Characteristic: - Reverse voltage: 100V, - Forward voltage drop: 1V to 10mA, - Forward direct current: 200mA, - Maximum overvoltage current: 4A, - Dissipated power: 500mW, - Recovery time: 4ns, - Configuration: Simple, - Package: DO-35, - Quantity: 30 units . Code T0003 Available Price €0.03
SONOFF L1 - Intelligent LED strip light WiFi IP65 5M Intelligent 5 metre LED strip by WiFi and RF, great for creating any atmosphere in any room. Change its colour and rhythm from your mobile phone or its remote control. Dance to the rhythm of the lights, copy the colour from your mobile or control the lighting with your voice assistant like Alexa or Google Home. Decorate your home with an infinite number of possible scenes. Code WS016 ✗ Out-of-Stock Price €30.57
10x Zener Diode BZX85C4V7 4.7V 1.3W DO-41 1300mW 4V7 10x Zener Diode BZX85C4V7 4.7V 1.3W DO-41 1300mW 4V7 features:-Zener voltage: 4.7V-Tolerance: 5%-Power dissipated: 1300mW-Enter Zener: 13 Ohm-Configuration: Simple-Encapsulated: DO-41-Temperature of work: -65C to 200C-Quantity: 10 units Code T0032 Available Price €0.17
40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €8.22
LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 ✗ Out-of-Stock Price €0.81