HC-SR04 Ultrasonic Sensor Distance Measuring Module
  • HC-SR04 Ultrasonic Sensor Distance Measuring Module

HC-SR04 Ultrasonic Sensor Distance Measuring Module

S0007

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle.
HC-SR04 Ultrasonic Sensor Distance Measuring Module features:
- Supply voltage: 5V (4.5V- 6V)
- Consumption: 30 mA typical, (35 mA max)
- Interface: VCC , GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED indicator of measurement in progress
- Frequency: 40 kHz for 200 µs - Size: 30mm x 20mm
- Quantity: 1 unit
Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry:
Automatic robot operation with obstacle detection />

OEM
5905323233980
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

HC-SR04 Ultrasonic Sensor Distance Measuring Module description

It is very easy to make it work with an Arduino, PIC or any other microcontroller.
In its output pin we will be able to measure the PWM pulse width depending on the distance of the obstacle.

HC-SR04 Ultrasonic Sensor Distance Measuring Module features:

- Supply voltage: 5V (4.5V- 6V)
- Consumption: 30 mA typical, (35 mA max)
- Interface: VCC , GND, Signal
- Range: 2 cm to 3 meters
- Angle 15º
- LED indicator of measurement in progress
- Frequency: 40 kHz for 200 µs
- Size: 30mm x 20mm
- Quantity: 1 unit

Useful links for Arduino / Raspberry programming and projects with boards Arduino / Raspberry:

Automatic robot operation with obstacle detection / Measure the distance to an obstacle with the HC-sensor SR04

- C wiring the HC-SR04 ultrasonic sensor with the UNO module

Customers who bought this product also bought

Starter KIT Arduino UNO R3 Atmega328 compatible

UNO R3 Basic Kit ATMega328 in a box for Arduino. It allows to build various projects of various complexity, from the easiest ... to the most complicated
The elements are placed in the box to keep everything in order.
100% Arduino compatible
Characteristic:
It includes the following module references:
- 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x Protoboard Breadboard 5x7cm
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 3x BC547B Bipolar Transistor NPN 50V 100mA 0.1A TO-92
- 3x BC557B Bipolar Transistor PNP 50V 100mA 0.1A TO-92
- 1x PCF8574P I/>

B0034

Regular price €35.94 -€3.71 Price €32.23

2km radius SI4463 433MHz RF Telemetry Arduino compatible

A compact, low-power Bottom Effect System Transceiver.
Transceiver based on the SI4463 Silicon Labs chip.
Industry standard model.
In full power operating conditions, open the communication distance up to 2000 km.
Much more than the SI4432.
Si4463 is a high performance 433 MHz transceiver. and low current consumption of the EZRadioPRO series, which includes a complete transmitter and receiver.
Higher sensitivity -126dBm.
The maximum output power of + 20dBm, support (G) FSK, 4 (G) FSK, (G) MSK, OOK and ASK modulation.
The data rate in the range of 100bps ~ 1Mbps.
Operating voltage of 1.8V ~ 3.6V.
FCC approval / IC. 2km radius SI4463 433MHz RF Arduino Telemetry features:
- Supply voltage: 1.8 ~ 3.6VDC

W0077

Price €5.98

Continous Rotation 360 Degree Servo S3003

Continous Rotation 360 Degree Servo S3003 features:
- Operating voltage: 4.8 V to 6 V
- Torque max.: 4.1kg / cm (6V)
- Operating speed: 0.23sec / 60degree (4.8V), 0.19sec / 60degree (6V)
- Radio max.: 360º
- Temperature range: -20º + 60ºC degrees
- Weight: 38 g
- Cable length: 26cm
- Dimensions: 40.5 x39x 20 mm
- Servo connector: JR
- Chinese manufacture

R0019

Regular price €6.57 -€0.96 Price €5.61

Thermal Pad - 1,5 W/mK - AG Thermopad

Thermal Pad Silicone Heat Pad CPU GPU features:
- The transfer of heat between the electronic components and the radiator is facilitated.
- Thermal conductivity 1,5W / mK
- Thickness 1mm quantity: 1 unit
- High quality - manufactured in EU
- Thermopad 100x20x1mm
- Thermally conductive tapes are used if the application of a thermal paste is not possible. The tapes are extremely flexible. Their high compressibility ensures excellent adjustment to elements in need of cooling

Q0039

Price €1.07

Related articles on blog

No related article on blog

€1.48

1,48 tax excl.

1
30+ items
Price €1.48

Order until 4pm we will send today
30 days return