Rechargeable Battery Samsung INR18650 2500mAh Li-ion
  • Rechargeable Battery Samsung INR18650 2500mAh Li-ion

Rechargeable Battery Samsung INR18650 2500mAh Li-ion

PP030

Rechargeable Battery Samsung INR18650 2500mAh Li-ion 3.7V 20A unprotected features:
IMPORTANT: This battery does not have a protection circuit.
Use it at your own risk.
Do not charge over 4.2V
Do not discharge below 3V
Do not change polarity
Do not heat the battery, or expose it to high temperatures
Do not wet or expose to environments of High humidity
For long periods of storage it should be stored below 45 ° C
After long periods of storage you will probably need to do some charging cycles to increase the capacity again.
Quantity: 1 unit
Nominal capacity: 2500mAh (0.2C, 2.75V discharge)
Minimum capacity: 2450mAh (0.2C, 2.75V discharge)
Charging voltage: 4.2 ± 0.05 V

Samsung
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Rechargeable Battery Samsung INR18650 2500mAh Li-ion 3.7V 20A unprotected features:

- IMPORTANT: This battery does not have a protection circuit.
- Use it at your own risk.
- Do not charge over 4.2V
- Do not discharge below 3V
- Do not change polarity
- Do not heat the battery, or expose it to high temperatures
- Do not wet or expose to environments of High humidity
- For long periods of storage it should be stored below 45 ° C
- After long periods of storage you will probably need to do some charging cycles to increase the capacity again.
- Quantity: 1 unit
- Nominal capacity: 2500mAh (0.2C, 2.75V discharge)
- Minimum capacity: 2450mAh (0.2C, 2.75V discharge)
- Charging voltage: 4.2 ± 0.05 V
- Nominal voltage: 3.7V
- Charging method: CC-CV (constant voltage with limited current)
- Charging current: standard charge: 1750mA, fast charge: 4000mA
- Max. Discharge current: 20A (ambient temperature 25 °) (pulse discharge - 100A 1s)
- Discharge cut-off voltage: 2.5V
- Cell Weight: 45.0g max
- Cell dimension: Height: 65.00 mm max., Diameter: 18.40 mm max.
- Operating temperature: load: 0 to 45 ° C, discharge: -20 to 60 ° C
- Temperature of storage: 1 year: -20 ~ 25 ° C, 3 months: -20 ~ 45 ° C, 1 month: -20 ~ 60 ° C
- Remember that the cell is unprotected

Data sheet

Capacidad
2500 mAh

Customers who bought this product also bought

Controller TB6612FNG DC PAP motor

TB6612FNG controller, double H-bridge controller driver.
Allows to control up to 2 current motors continuous or bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.
Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32.
An improved version of the L298N.
H-bridges are made up of MOSFET transistors, rather than BJT transistors as in the L298N.
The TB6612FNG has better efficiency and smaller dimensions than the L298N.
Controller TB6612FNG DC PAP motor features:

- Minimum operating voltage: 4.5 V
- Maximum operating voltage: 13.5 V (15V max)
- Maximum current: ± 3A per channel (1.2 A direct current per channel)
- Logic voltage: 5V

R0002

Price €4.95

LEONARDO R3 ATmega32u4 board + Arduino compatible USB cable

It has an Atmega32u4 chip running at 16Mhz with a factory-loaded bootloader.
The Leonardo module has all the connectors that the Arduino Leonardo R3 and is compatible with all Arduino shields. LEONARDO R3 ATmega32u4 board + Arduino compatible USB cable features:
- ATmega32u4 microcontroller,
- Operating voltage 5V,
- Power (recommended) 7-12V,
- Digital pins I / O 20 (of which 7 can be used as PWM outputs),
- Analog input pins 12,
- DC current through I / O Pin 40 mA,
- DC current for pin 3.3V 50 mA,
- Flash memory 32 KB (of which 4 KB are used by the bootloader),
- SRAM 2.5 KB,
- EEPROM 1 KB, - Clock speed 16 MHz,
- Interface: UART, USB, SPI, I2C,
- USB communication - Atmega32u4,

B0004

Regular price €9.01 -€2.00 Price €7.01

DSC321 AT24C32 with Real Time Clock RTC Battery

RTC DS3231 clock module with EEPROM 32k.
High precision RTC module.
Can be used in projects of Arduino, PIC, AVR, STM32 and other.
DSC321 AT24C32 with Real Time Clock RTC Battery features:
- Based on DS3231
- EEPROM AT24C32 (32K)
- I2C interface
- LED work indicator
- Includes CR2032 3V battery

M0004

Price €3.71

Flux BORAX 500g

Flux BORAX Unblocker features: Flux for soldering and welding with brazing solders. Dissolves metal oxides and facilitates bonding of solder with soldered material. Borax occurs as fine crystalline without fluorides.

Q0066

Price €3.26

Micro:bit BBC v2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer

The novelty of micro:Bit for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker.

It contains a quick start guide in the same package.

B0111

Price €18.17

Rocker Switch 3A 250V On/Off SPST

Rocker Switch 3A 250V On/Off SPST features:
- 2x AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch
- Rocker switch; Type: On/Off (SPST)
- Control on and off SPST and 2 terminals
- Voltage and Current: AC250V, 3A
- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)
- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)
- Black

K0092

Price €0.78

Acrylic robot 4 DOF Arm without servo

Robot arm set 4 DOF acrylic with screws and screwdriver for robotics projects.
100% compatible with Arduino.
Acrylic robot 4 DOF Arm without servo features:
- Type: DIY kit robot arm 4 DOF
- Degree: 4 degrees of freedom
- Material: acrylic
- For: 8 years and above
- Weight: ~ 450 g
- Does not include servos but it is imperative to have 4 micro servos sg90 to be able to mount it
More informations:
1. 4 arm axes with more untrammeled and flexible experience.
2. Most of the pieces are integrated in a perforated way at a time, which is very strong and easy to install.
3. All movement joints are using high quality bearings with good precision.

R0077

Price €17.35
€5.44

5,44 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €5.44

Order until 4pm we will send today
30 days return