Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Last items in stock Price €61.12
Sensor Module Moisture Earth Water Soil The module has two outputs: analog A0 and digital D0 Digital output D0 - signal 0 appears or 1 depending on the threshold setting The threshold is set with the potentiometer The sensor can be used for example: Automatic watering for potted plants With this module you will be able to measure the humidity of the soil, so that you will be able to control the humidity level of the soil of your plants Characteristic: Operation: 3.3V -5V - Sensitivity adjustable by potentiometer - Dual output mode: analog and digital - Red LED - power indicator - Green LED - indicator digital switching output - PCB measurements: 3 x 1.5 cm - Probe measurements: 6 x 3 cm Code S0021 Available Price €1.61
Mini Submersible Water Pump DC 3V 120L/H Characteristic: - Operating voltage: 3-6V - Max flow: 80-120 l / h - Maximum pumping height: 40-110cm - Continuous working time of 500 hours - Cable length: 20cm - Inside outlet diameter: 5 mm - Outside outlet diameter: 7.5 mm - Dimensions: 45mm x 23mm x 30mm Code M0040 ✗ Out-of-Stock Regular price €2.06 -€0.51 Price €1.55
Keyestudio Microbit Starter Smart Home Kit This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit does not include the micro:bit board. Code RA170 Available Regular price €68.59 -€9.03 Price €59.56
Display OLED 0.96" 128x64 White I2C 4 Pin Display OLED 0.96" 128x64 White I2C 4 Pin features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degree - Screen color: white - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ... - It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface. - The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver. Code P0091 Available Regular price €5.37 -€2.51 Price €2.86
Crash Sensor Brick, Limit switch for micro:bit The Limit Switch - Crash Sensor Brick is a sensor module based on the emergency switch, with a simple circuit design and high sensitivity. Code EL0130 Available Price €4.92
Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €5.78
DFRobot Maqueen Lite-micro:bit The micro:bit Maqueen educational programming robot platform is a simple to use programming robot for STEAM education, which inherits the playability and easily understandable operation of micro:bit. With a mini body, for play and tinkering, it allows students to quickly learn graphical programming in an entertaining way, while nurturing their interests in science and logical thinking. Code DF002 Last items in stock Regular price €41.28 -€2.90 Price €38.38
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA138 ✗ Out-of-Stock Price €3.72
Keyestudio Shield Sensors V2 micro:bit Keyestudio Shield expansion board for the micro:bit. Allows connection to all outputs of the minicomputer via pin strip. Shield v2.0 for micro:bit incorporates 44-pin connectors to facilitate the connection of the various sensors to the minicomputer. Code RA165 ✗ Out-of-Stock Price €7.81
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €57.77 -€20.00 Price €37.77
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 ✗ Out-of-Stock Price €3.72
BBC micro:bit V2.21 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.21 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €17.31 -€1.00 Price €16.31
T-type Protoboard GPIO Extension Board for Micro:Bit with 5V and 3.3 V output GPIO breadboard extension board for Micro:Bit enables direct connection to the breadboard. The connection is very intuitive - you will have everything set up in seconds. It makes it easy to connect sensors and modules. An additional advantage of this board is the separate 5V and 3.3V supply pins. This makes it possible to use larger groups of sensors and modules. Code RA166 Available Regular price €7.81 -€1.00 Price €6.81
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €3.72
SparkFun micro:climate kit for micro:bit - v3.0 The SparkFun micro:Climate kit is a complete weather station kit that builds on the weather:bit carrier board with weather and soil moisture sensors, all powered by the micro:bit. board. Code SP073 Backorder Price €147.93
SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Last items in stock Price €90.83
Crash Sensor Brick, Limit switch for micro:bit The Limit Switch - Crash Sensor Brick is a sensor module based on the emergency switch, with a simple circuit design and high sensitivity. Code EL0130 Available Price €4.92
Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €5.78
DFRobot Maqueen Lite-micro:bit The micro:bit Maqueen educational programming robot platform is a simple to use programming robot for STEAM education, which inherits the playability and easily understandable operation of micro:bit. With a mini body, for play and tinkering, it allows students to quickly learn graphical programming in an entertaining way, while nurturing their interests in science and logical thinking. Code DF002 Last items in stock Regular price €41.28 -€2.90 Price €38.38
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA138 ✗ Out-of-Stock Price €3.72
Keyestudio Shield Sensors V2 micro:bit Keyestudio Shield expansion board for the micro:bit. Allows connection to all outputs of the minicomputer via pin strip. Shield v2.0 for micro:bit incorporates 44-pin connectors to facilitate the connection of the various sensors to the minicomputer. Code RA165 ✗ Out-of-Stock Price €7.81
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €57.77 -€20.00 Price €37.77
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 ✗ Out-of-Stock Price €3.72
BBC micro:bit V2.21 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.21 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €17.31 -€1.00 Price €16.31
T-type Protoboard GPIO Extension Board for Micro:Bit with 5V and 3.3 V output GPIO breadboard extension board for Micro:Bit enables direct connection to the breadboard. The connection is very intuitive - you will have everything set up in seconds. It makes it easy to connect sensors and modules. An additional advantage of this board is the separate 5V and 3.3V supply pins. This makes it possible to use larger groups of sensors and modules. Code RA166 Available Regular price €7.81 -€1.00 Price €6.81
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €3.72