Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89
Joystick Breakout Board for BBC Micro:Bit The joystick board can be used to simulate the mouse keyboard. The 3V, G, P0 and P1 are connected to a card micro: bit to imitate the serial port. This board consists of 6 buttons and joystick. Connect the joystick and buttons to the micro: bit pins. Code RA040 Available Price €9.95
Resistor 220 Ohm 5% 0,25W 1/4W Resistor 220 Ohm 5% 0,25W 1/4W features:-220 Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0008 Available Price €0.08
Infrared Receiver VS 1838 38kHz Ideal for projects with ARDUINO, PIC, AVR, Raspberry The infrared receiver receives the signal of 38kHz for remote control Code W0042 Available Price €0.65
5x Push Switch Button B3F Omron Red Key 12mm 5x Push Switch Button B3F Omron Red Key 12mm features:- 5x Push Buttons B3F Omron Key- Maximum current: 50 mA- Tension DC: 24V- Operating force: 1.27N- Switch terminals: weldable- Contact: SPST-NO- Contact resistance: 100M Ohm- Type of action: Superficial- Measures: 12x12x7.3mm Code K0073 Available Price €0.20
Module TCRT5000 Infrared Sensor IR Tracker Line Obstacle The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision. The ideal obstacle detection detector for the installation of smart robots. TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object. The working wavelength is 950nm. The transmitter is infrared LED and the phototransistor receiver. By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected). The sensor allows the detection of an object at a distance of up to 12 mm. Code S0025 Available Price €1.85
NE555P DIP8 Precision Timer Integrated Circuit NE555P DIP8 Precision Timer Integrated Circuit features: - Blister: DIP8- Number of pins: 8- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Input voltage VCC: 4.5 - 16 VDC- THRES voltage level: 2.4 - 11.2 VDC- TRIG voltage level: 1.1 - 5.6 VDC- RESET voltage level: 0.3 - 1 VDC- DISCH voltage level change out of state: 0.15 - 0.4 nA- CONT voltage (open circuit): 2.6 - 11 VDC- Low level output voltage: 0.1 - 0.4 V- High level output voltage: 2.75 - 13.3 V - Output current I (O): ± 200 mA- THRES current: 30 - 250 nA- TRIG current: 0.5 - 2 μA- RESET current: -0.4 - 0.4 μA- Current change DISCH out of state: 20 - 100 nA Code T0061 Available Price €0.79
Digital Touch Sensor B21 The module is based on a touch sensitive IC capacitive touch switch module (TTP223B). In the normal state, the module produces Low power consumption. When a finger touches the corresponding position, the module output is high, if not touched for 12 seconds, it switches to low power mode. Digital Touch Sensor B21 features: - Low power consumption - Input voltage: 2 - 5.5VDC - Can replace the traditional touch of a button - Four M2 screws diameter 2.2 mm that position the holes for easy installation - 3-pin control interface: 1- GND 2- VCC 3- Control signal (output pin) - Power indicators: Bright green LED when the sensor is on Code M0130 Available Price €1.49
Keyestudio Microbit Starter Smart Home Kit This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit does not include the micro:bit board. Code RA170 Available Regular price €82.99 -€17.00 Price €65.99
KittenBot Silicone Kitty Case orange for micro:bit Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Code RA177 Backorder Price €4.90
Keyestudio Shield Sensors V2 micro:bit Keyestudio Shield expansion board for the micro:bit. Allows connection to all outputs of the minicomputer via pin strip. Shield v2.0 for micro:bit incorporates 44-pin connectors to facilitate the connection of the various sensors to the minicomputer. Code RA165 Available Price €9.45
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Regular price €26.50 -€2.00 Price €24.50
Micro:bit Starter Kit The Microbit Starter kit has provided 24 types of electronic components to help you get started. Micro:bit Starter kit can help your children enter a wonderful electronic world. Note: the micro:bit board is not included, you can buy it separately. Code EL0107 Available Price €35.90
Ring:bit 6 IN 1 Pack : Bricks pack - building and coding kit for micro:bit Six cases of fun in one kit: kids can build 6 shapes, including traffic lights, brick car, temperature-controlled fans, smart desk lamp, windscreen wiper and trebuchet. Building with this kit is just as easy as building with Lego. Note: the micro:bit board is not included, you can buy it separately. Code EL0104 Backorder Price €58.90
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Last items in stock Price €4.50
BBC micro:bit V2.2 Go - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Regular price €23.95 -€0.96 Price €22.99
Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €95.95
Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90
Protoboard GPIO T-type Extension Board for Micro:Bit Connect this extension board to the micro: bit development board, then they can be directly connected to the breadboard. Code RA043 ✗ Out-of-Stock Price €7.50
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €69.90 -€20.00 Price €49.90
Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99
Micro:bit IOBit Expansion board V1.0 IOBIT expansion board for the micro:bit minicomputer. Allows connection to all minicomputer outputs via a pin strip. Code RA135 Available Regular price €6.99 -€1.50 Price €5.49
Keyestudio Microbit Starter Smart Home Kit This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit does not include the micro:bit board. Code RA170 Available Regular price €82.99 -€17.00 Price €65.99
KittenBot Silicone Kitty Case orange for micro:bit Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Code RA177 Backorder Price €4.90
Keyestudio Shield Sensors V2 micro:bit Keyestudio Shield expansion board for the micro:bit. Allows connection to all outputs of the minicomputer via pin strip. Shield v2.0 for micro:bit incorporates 44-pin connectors to facilitate the connection of the various sensors to the minicomputer. Code RA165 Available Price €9.45
USB rechargeable battery 16340 CR123A Li-Ion The Ansmann 16340 3.6V lithium-ion protected battery (RCR123A) with USB charging socket is extremely long-lasting and can be recharged up to 2000 times even under difficult conditions of use. Code PP123 Available Regular price €26.50 -€2.00 Price €24.50
Micro:bit Starter Kit The Microbit Starter kit has provided 24 types of electronic components to help you get started. Micro:bit Starter kit can help your children enter a wonderful electronic world. Note: the micro:bit board is not included, you can buy it separately. Code EL0107 Available Price €35.90
Ring:bit 6 IN 1 Pack : Bricks pack - building and coding kit for micro:bit Six cases of fun in one kit: kids can build 6 shapes, including traffic lights, brick car, temperature-controlled fans, smart desk lamp, windscreen wiper and trebuchet. Building with this kit is just as easy as building with Lego. Note: the micro:bit board is not included, you can buy it separately. Code EL0104 Backorder Price €58.90
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Last items in stock Price €4.50
BBC micro:bit V2.2 Go - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Regular price €23.95 -€0.96 Price €22.99
Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €95.95
Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90