Cables with Crocodile Clips pack 10pcs Price €2.95 Add to cart Micro Servo 9g SG90 Price €2.69 Add to cart Micro:bit BBC v2.2 - WiFi Single Board Micro-Computer - Starter Pack Price €26.79 Add to cart LED Diode Assortment Kit 50x Red Green Yellow Blue White Price €1.99 Add to cart 10 other products in the same category Previous Next Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90 SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €109.90 Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 Backorder Price €4.50 Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €98.95 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 CR123A Li-ion battery holder for robot Maqueen This is a lithium-ion battery holder specially designed for the educational robot micro: Maqueen bit. This lithium-ion battery holder integrates the charging circuit and MicroUSB interface, freeing users from the purchase of an additional charger. Code DF010 Available Price €9.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99 Error in the product description. Report
Micro Servo 9g SG90 Price €2.69 Add to cart Micro:bit BBC v2.2 - WiFi Single Board Micro-Computer - Starter Pack Price €26.79 Add to cart LED Diode Assortment Kit 50x Red Green Yellow Blue White Price €1.99 Add to cart 10 other products in the same category Previous Next Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90 SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €109.90 Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 Backorder Price €4.50 Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €98.95 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 CR123A Li-ion battery holder for robot Maqueen This is a lithium-ion battery holder specially designed for the educational robot micro: Maqueen bit. This lithium-ion battery holder integrates the charging circuit and MicroUSB interface, freeing users from the purchase of an additional charger. Code DF010 Available Price €9.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
Micro:bit BBC v2.2 - WiFi Single Board Micro-Computer - Starter Pack Price €26.79 Add to cart LED Diode Assortment Kit 50x Red Green Yellow Blue White Price €1.99 Add to cart 10 other products in the same category Previous Next Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90 SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €109.90 Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 Backorder Price €4.50 Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €98.95 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 CR123A Li-ion battery holder for robot Maqueen This is a lithium-ion battery holder specially designed for the educational robot micro: Maqueen bit. This lithium-ion battery holder integrates the charging circuit and MicroUSB interface, freeing users from the purchase of an additional charger. Code DF010 Available Price €9.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
LED Diode Assortment Kit 50x Red Green Yellow Blue White Price €1.99 Add to cart 10 other products in the same category Previous Next Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89 NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49 Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90 SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €109.90 Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 Backorder Price €4.50 Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €98.95 Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96 CR123A Li-ion battery holder for robot Maqueen This is a lithium-ion battery holder specially designed for the educational robot micro: Maqueen bit. This lithium-ion battery holder integrates the charging circuit and MicroUSB interface, freeing users from the purchase of an additional charger. Code DF010 Available Price €9.90 ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95 Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89
NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49
Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90
SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €109.90
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 Backorder Price €4.50
Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €98.95
Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96
CR123A Li-ion battery holder for robot Maqueen This is a lithium-ion battery holder specially designed for the educational robot micro: Maqueen bit. This lithium-ion battery holder integrates the charging circuit and MicroUSB interface, freeing users from the purchase of an additional charger. Code DF010 Available Price €9.90
ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95
Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89
NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Price €180.49
Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90
SparkFun Weather Meter Kit The SparkFun weather meter kit is a set of basic mechanical components for building a weather station. This kit represents the three basic elements of weather measurement: wind speed, wind direction and precipitation. Whether you are a farmer, a professional meteorologist or a weather enthusiast, building your own weather station can be a truly rewarding project. However, when it comes to measuring the weather, you need some pretty specialised sensors. Code SP090 Backorder Price €109.90
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 Backorder Price €4.50
Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 Last items in stock Price €98.95
Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96
CR123A Li-ion battery holder for robot Maqueen This is a lithium-ion battery holder specially designed for the educational robot micro: Maqueen bit. This lithium-ion battery holder integrates the charging circuit and MicroUSB interface, freeing users from the purchase of an additional charger. Code DF010 Available Price €9.90
ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €63.95
Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99