Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 ✗ Out-of-Stock Price €4.50
Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90
Smart Science IoT Kit : micro:bit climate sensor kit for IoT learning ELECFREAKS Smart Science IoT Kit is developed on the basis of loT:Bit, a new breakout board compatible with ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module. It can build the scene such as air quality monitoring, environmental noise detection, environmental quality monitoring station, automatic watering detection, self-defence monitoring station and more. Code EL0109 Last items in stock Price €73.90
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €69.90 -€20.00 Price €49.90
FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi and Bluetooth) FireBeetle 2 ESP32, specially designed for IoT, is a main controller board based on ESP-WROOM-32D with dual-core chips. The FireBeetle microcontroller is compatible with Arduino Uno. It integrates the ESP-WROOM-32 dual-core module, which supports MCU, WiFi and Bluetooth communication. Code DF026 Available Price €11.95
Blue silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5.5 cm * 6.5 cm Material: gel silica (environmental protection material) Code RA045 ✗ Out-of-Stock Price €5.00
Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89
DFRobot Maqueen Lite-micro:bit The micro:bit Maqueen educational programming robot platform is a simple to use programming robot for STEAM education, which inherits the playability and easily understandable operation of micro:bit. With a mini body, for play and tinkering, it allows students to quickly learn graphical programming in an entertaining way, while nurturing their interests in science and logical thinking. Code DF002 Available Regular price €49.95 -€2.90 Price €47.05
BBC micro:bit V2.2 Go - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Regular price €23.95 -€0.96 Price €22.99
Colorful RGB Light Halo Module for Microbit Arduino Rpi Colourful RGB Halo Light module for microbit, Arduino, Raspberry Pi. The module is equipped with 8 RGB LEDs and has three connection methods: alligator clip, DuPont cable and PH2.0 cable. Users can control it to turn into any colour by programming and achieve various lighting effects. Code RA167 Available Price €4.95
BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.2 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €20.95 -€1.00 Price €19.95
Blue silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA136 ✗ Out-of-Stock Price €4.50
Elecfreaks Experiment box for micro:bit Experiment box kit consists of 14 on-board components to learn how to use the micro:bit to control the circuit. The experiment box kit is easy to learn to program and a quick introduction to basic electronics knowledge. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0101 Last items in stock Price €65.90
Smart Science IoT Kit : micro:bit climate sensor kit for IoT learning ELECFREAKS Smart Science IoT Kit is developed on the basis of loT:Bit, a new breakout board compatible with ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module. It can build the scene such as air quality monitoring, environmental noise detection, environmental quality monitoring station, automatic watering detection, self-defence monitoring station and more. Code EL0109 Last items in stock Price €73.90
Seeed Grove Inventor Kit for micro:bit The Grove inventor kit is a great extension set for your micro:bit. By using Grove shield for micro:bit you are able to connect all the modules included in the pack purely by the Grove connectors with no need to solder or wire any parts. Now you can focus only on programing with your great mirco:bit. Code SS005 Available Regular price €69.90 -€20.00 Price €49.90
FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi and Bluetooth) FireBeetle 2 ESP32, specially designed for IoT, is a main controller board based on ESP-WROOM-32D with dual-core chips. The FireBeetle microcontroller is compatible with Arduino Uno. It integrates the ESP-WROOM-32 dual-core module, which supports MCU, WiFi and Bluetooth communication. Code DF026 Available Price €11.95
Blue silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5.5 cm * 6.5 cm Material: gel silica (environmental protection material) Code RA045 ✗ Out-of-Stock Price €5.00
Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89
DFRobot Maqueen Lite-micro:bit The micro:bit Maqueen educational programming robot platform is a simple to use programming robot for STEAM education, which inherits the playability and easily understandable operation of micro:bit. With a mini body, for play and tinkering, it allows students to quickly learn graphical programming in an entertaining way, while nurturing their interests in science and logical thinking. Code DF002 Available Regular price €49.95 -€2.90 Price €47.05
BBC micro:bit V2.2 Go - Starter Pack The novelty of micro:Bit for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0125 Available Regular price €23.95 -€0.96 Price €22.99
Colorful RGB Light Halo Module for Microbit Arduino Rpi Colourful RGB Halo Light module for microbit, Arduino, Raspberry Pi. The module is equipped with 8 RGB LEDs and has three connection methods: alligator clip, DuPont cable and PH2.0 cable. Users can control it to turn into any colour by programming and achieve various lighting effects. Code RA167 Available Price €4.95