PLA Filamento 1.75mm 0.85kg Graphite color grafito Premium Bobina para Impresora 3D Code I0405 Backorder Price €17.49
HC-SR505 Mini Module Motion Detector Infrared PIR Sensor Arduino compatible IR motion detector with a detection range of 3 meters. One sensor electric pyro, which can detect infrared radiation levels - detect a change in the average IR levels of your detection zone. Ideal for projects with ARDUINO, PIC, AVR, STM32. Characteristic: - Operating voltage: 4.5V- 20V - Consumption in idle state: Code S0037 Available Price €2.70
Transceiver 1km SI4432 433MHz Wireless Transmitter Telemetry Transceiver 1km SI4432 433MHz Wireless Transmitter Telemetry features: - Transceiver based on the SI4432 Silicon Labs chip - Ultrathin ultra small (16.5 × 17 mm) - Good harmonics: easy for FCC / CE certification - Penetration capacity (measured through 8 floors) - Frequency range: 433.92MHz - Sensitivity down to -121 dBm - Maximum output power: 20dBm - Data transfer rate: 0.123-256 kbps - FSK, GFSK and OOK modulation - Power supply: 1.8-3.6 V - Ultra low power shutdown mode - Digital indication of received signal strength (RSSI) - Time to wake up - Bidirectional antenna switch control and automatic adjustment - Configurable packet structure - Preamble detection Code W0075 Available Price €4.99
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €4.50
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA138 Available Price €4.50
TDA2030A 1X18W Audio Amplifier TDA2030A 1X18W Audio Amplifier features: - Chip: TDA2030A - Power supply: DC 6V ~ 12V - Channel type: Single channel - Output power: 1 x 18 W - Output output: 4 ~ 8 Ohm - Mono mode - Size (LxWxH): 31.6 x 23.5 mm Code M0063 Available Regular price €3.39 -€1.00 Price €2.39
Nozzle Head 0.5 1.75 MK8 3D Printer Extruder Nozzle Head 0.5 1.75 MK8 3D Printer Extruder features: - MK8 Precision Nozzle: 0.5mm - Material: Copper - Size: 13mm x 6mm - Suitable for Filament: 1.75mm - Quantity: 1 unit Code I0077 Available Price €1.39
PLA Filamento 1.75mm 0.85kg Black color negro Premium Bobina para Impresora 3D Code I0400 ✗ Out-of-Stock Price €17.49
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA138 Available Price €4.50
FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi and Bluetooth) FireBeetle 2 ESP32, specially designed for IoT, is a main controller board based on ESP-WROOM-32D with dual-core chips. The FireBeetle microcontroller is compatible with Arduino Uno. It integrates the ESP-WROOM-32 dual-core module, which supports MCU, WiFi and Bluetooth communication. Code DF026 Available Price €11.95
Yellow silicone protective cover for BBC Micro:Bit V2 Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA137 ✗ Out-of-Stock Price €4.50
Power supply shield for BBC Micro:Bit This expansion board comes with two interfaces, which can access two-cell batteries, each supplying 1.5V. It also comes with a DIP switch to control the power input. In the experiment, you can connect the expansion card and the micro: bit development card using a JST red-black cable -PH2.0MM-2P 24AWG dual-head to supply power for the micro: bit development board. Code RA042 Available Price €8.90
NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Regular price €180.49 -€30.50 Price €149.99
Orange silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5.5cm * 6.5cm Material: silica gel (environmental protection material) Code RA046 ✗ Out-of-Stock Price €5.00
Construction kit 32 IN 1 micro:bit - Wonder Building kit With this 32 in 1 construction kit you can build all 32 options or develop your imagination by building your own project. Note: the micro:bit board is not included, you can buy it separately. Code EL0112 ✗ Out-of-Stock Regular price €94.95 -€5.00 Price €89.95
Grove Shield for micro:bit v2.0 Using Grove shield for micro:bit you can connect all modules included in the pack only by Grove connectors without soldering or wiring any parts. Now you can concentrate only on programming with your great micro:bit. Code SS016 Available Regular price €11.49 -€1.50 Price €9.99
2x AAA 3V battery holder for Micro:bit Weight: 12.7g Box size: 62 * 25 * 10 mm Code PP037 Available Price €1.99
Ring:bit Car v2 Kit : DIY programming smart car for micro:bit The ELECFREAKS Ring:bit Car is a small DIY smart car powered by the BBC micro:bit. Manual installation can better exercise children's skills. The makecode graphical programming blocks allow children to learn programming from simple to complex in a fun way. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0102 Available Price €29.49
BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.2 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €20.95 -€1.00 Price €19.95
Gravity: Huskylens - An easy-to-use AI camera | vision sensor Huskylens is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0305) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF013 Available Price €71.49
KittenBot Silicone Kitty Case orange for micro:bit Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Code RA177 Backorder Price €4.90
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
STEAM kit - Keyes Sensor Learning Starter Kit for BBC micro:bit Keyes 37 sensor kit is a great extension set for your Micro:Bit. Using Sensor shield for Micro:Bit you can connect all modules included in the pack only by the connectors without soldering or wiring any parts. Now you can concentrate only on programming with your big Mirco:Bit. Code B0128 Available Regular price €75.95 -€6.00 Price €69.95
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Last items in stock Price €4.50
Smart Home Kit for micro:bit Smart Home Kit is a product on the basis of smart home project for micro:bit which is developed by ELECFREAKS. You can use it to create many different cases, such as smart fan, voice-activated lights, automatic windows and more. Note: the micro:bit board is not included, you can buy it separately. No soldering is required, as the modules are fitted with convenient connectors. Code EL0108 Backorder Price €73.96
FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi and Bluetooth) FireBeetle 2 ESP32, specially designed for IoT, is a main controller board based on ESP-WROOM-32D with dual-core chips. The FireBeetle microcontroller is compatible with Arduino Uno. It integrates the ESP-WROOM-32 dual-core module, which supports MCU, WiFi and Bluetooth communication. Code DF026 Available Price €11.95
Blue silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5.5 cm * 6.5 cm Material: gel silica (environmental protection material) Code RA045 ✗ Out-of-Stock Price €5.00
Ring:bit 6 IN 1 Pack : Bricks pack - building and coding kit for micro:bit Six cases of fun in one kit: kids can build 6 shapes, including traffic lights, brick car, temperature-controlled fans, smart desk lamp, windscreen wiper and trebuchet. Building with this kit is just as easy as building with Lego. Note: the micro:bit board is not included, you can buy it separately. Code EL0104 Backorder Price €58.90
Micro:Bit shield Functional IObit v2.0 expansion card IObit v2.0 Expansion board for the micro:bit minicomputer. It allows the connection to all the connectors of the minicomputer through pins.There is also a buzzer on the board. On the back of the module there is a description of the connectors. Code RA044 Available Price €9.99